Page 1
Power sensitive electronics
ars of safe and
Marine & other rugged environments
Mobile Offices (TV and Radio Vans)
s
Base Station Power
DC Battery Charger s
BCD605 Series D C Battery Charger
• Ultra-Quiet
•
without interference
• Rugged & Reliable
• Ensure ye
trouble free operation
• Fast & Accurate Charging
•
•
• Automotive / RV / Military
• Electric Utilities and Substation
•
(Radio & Telecommunications)
• Industrial Controls
• Field Work / Construction Sites
• Solar / Alternative Power Systems
• Emergency Backup Power (UPS)
• Charge any 24V Battery System
The BCD605 battery charger provides up to 600 watts to charge a 12V or
24V battery system (1 bank) from a 12V source. Both the 12V source and
the batteries under charge must share a common ground.
This all-new single board design incorporates state of the art switchmode
technology for unmatched efficiency and ultra-quiet operation. Multiple
stages of filtering reduce radiated or conducted noise to very low levels.
Extra features include adjustable output voltage, audible and visual
indicators for low input voltage, low output voltage and over temperature.
Safety features include reverse input protection, over-temperature
shutdown, current limiting, short circuit protection wit h automatic recovery,
input undervoltage shutdown, reverse battery protection and output
overvoltage crowbar.
An optional remote control is also available. We are confident that you will
get many years of reliable service from this Battery charger.
• Adjustable output voltage for
charging standard or deep
cycle lead-acid, VRLA or Gel
cell type battery
• Audible & visual indicators for
constant current, low input
voltage, low output voltage &
over-temperature
• Extremely rugged and well
suited for marine and other
demanding environments
• High tolerance for shock and
vibration
• Ultra-quiet low EMI operation
• Current limiting protection
• Short circuit protection
• Reverse input protection
• Output over-voltage crowbar
• Dry contact output fail relay
• Over-temperature shutdown
• Spark-free connection
• Wide-Temperature
operation Available
• Conformal coating and/or harsh
environment ruggedization
available
• Optional portable features for
automotive use
• 3 year parts and labour
warranty
Page 2
-25° to +40°C @ maximum output
0 - 95°C Relative Humidity
(non-condensing) with optional conformal coating
Audible Noise
NONE Ødb @ 3 ft
Typical Service Life
> 10 yrs. (87,600 hrs)
Input Volts (DC)
10.5 – 14 10.5 – 28
Input Amps (max)
50
Input Fuse (AGC)
Noise on Input
< 50 mV
Output Nominal (op)
12 24
Output Volts (DC)
13.6 ± 0.05 27.2 ± 0.05
Charging Current (Amps)
♦ 40 ♦ 20
Output Adjustment
± 0.5
Output Crowbar
16.0 ± 0.5V 32.0 ± 1.0V
Output Fuse (AGC)
25A x 2
Output Ripple & Noise
< 50 mV
Battery Banks
1
Stages
Battery Size (Amp Hours)
160-240 80-120
Regulation (Line & Load)
< +/- 0.5%
Duty Cycle
Efficiency
> 90% @ Maximum Output
Length
9.1 in / 23.1 cm
Width
7.8 in / 19.8 cm
Height
4.3 in / 10.8 cm
Material
Marine Grade Aluminium
Finish
Black Anodize / Powder Epoxy Coat
Fastenings
All 18-8 Stainless Steel
Weight
Connections
Four contact output terminals
Available From:
Model Number BCD605-12-12 BCD605-12-24
30A x 2
Low Input Voltage
Alarm
10.5 V
2
Continuous 100% for 24 hours per day
♦ The Actual charging rate depends upon the input/output voltage ratio. To obtain
the charging capability at any given input voltage, use the following formula:
Charging Current = Input Volts/Output Volts x 40
For example, at 11 VDC in and 13.6 VDC out, the charging current = 11.5/13.6 x 40 = 33.8 amps
Operating Temp.
Range
Humidity
Isolation
Warranty
Derate Linearly 2.5% per °C from 40°C
(Optional -40°C extra wide-temp. operation avail.)
Any Input or Output to Case 500 VDC
Input to Output – Common Negative
6.0 lb / 2.7 kg
3 years
Loading...