Power sensitive electronics
ars of safe and
Marine & other rugged environments
Mobile Offices (TV and Radio Vans)
•
•
DC Battery Charger s
BCD600 DC Battery Charger
• Ultra-Quiet
•
without interference
• Rugged & Reliable
• Ensure ye
trouble free operation
• Fast & Accurate Charging
The BCD600 battery charger provides up to 600 watts to charge a 12V or
24V battery system (1 bank) from a 32V or 36V source. The source and the
batteries under charge must share a common ground.
The all-new single board design incorporates state of the art switchmode
technology for unmatched efficiency and ultra-quite operation. Multiple
stages of filtering reduce radiated or conducted noise to very low levels. The
BCD600 Series is capable of charging up to two independent banks of
batteries.
The unit can be left permanently connected without fear of overcharge or
damage to the batteries. The adjustable float voltage feature allows the unit
to be used for any type of lead-acid battery including lead acid and gel cell.
Available options include a remote control. We are confident that you will get
many years of reliable service from this Battery charger.
•
•
• Automotive / RV / Military
• Electric Utilities and Substations
• Communications Systems
• Industrial Controls
• Field Work / Construction Sites
• Solar / Alternative Power Systems
• Emergency Backup Power (UPS)
• Charge any 12 or 24V Battery System
Adjustable output voltage for charging
standard or deep cycle lead-acid, VRLA
or Gel cell type battery
• Audible & visual indicators for constant
current, low input voltage, low output
voltage & over-temperature
• Extremely rugged and well suited for
marine and other demanding
environments
• High tolerance for shock and vibration
• Ultra-quiet low EMI operation
• Current limiting protection
• Short circuit protection
Reverse input protection
• Output over-voltage crowbar
• Dry contact output fail relay
• Over-temperature shutdown
• Spark -free connection
• Wide-Temperature
operation Available
• Conformal coating and/or harsh
environment ruggedization
available
• Optional portable features for
automotive use
• 3 year parts and labour warranty
-25° to +40°C @ maximum output
0 - 95°C Relative Humidity
Audible Noise
NONE Ødb @ 3 ft
Typical Service Life
> 10 yrs. (87,600 hrs)
Input Amps (max)
40 40
Input Fuse (AGC)
25A x 2 25A x 2
Noise on Input
Low Input Voltage
Alarm
Length
9.1 in / 23.1 cm
Width
7.8 in / 19.8 cm
Height
4.3 in / 10.9 cm
Material
Marine Grade Aluminium
Finish
Black Anodize / Powder Epoxy Coat
Fastenings
All 18-8 Stainless Steel
Weight
6.0 lb / 2.7 kg
#10 AWG Input Wires (Positive & Negative)
Four contact output terminals
Output Nominal (op)
12 24
Output Volts (DC)
13.6 ± 0.05 27.2 ± 0.05
Charging Amps
50 cont. 38 cont.
Output Adjustment (Vdc)
± 0.5V
Output Crowbar
16.0 ± 0.5V 32.0 ± 1.0V
Output Fuse (AGC)
30A x 2 25A x 2
Output Ripple & Noise
< 25 mV
Battery Banks
Stages
2
Battery Size (Amp Hours)
200-300 152-228
Regulation (Line & Load)
Duty Cycle
Continuous 100% for 24 hours per day
Efficiency
> 90% @ Maximum Output
Available From:
Model Number BCD600-32-12 BCD600-32-24
Input Volts (DC)
20 – 45 30 – 45
< 25 mV
10.5V
1
< +/- 0.5%
Operating Temp.
Range
Humidity
Isolation
Derate Linearly 2.5% per °C from 40°C
(Optional -40°C extra wide-temp. operation avail.)
(non-condensing) with optional conformal coating
Any Input or Output to Case 500 VDC
Input to Output – Common Negative
Connections
Warranty
3 years
Loading...