Analytic Systems BCD301 Data Sheet

Page 1
Power sensitive electronics
rs of safe and
Heavy Equipment
DC Battery Equalizers
BCD301 Series B attery Equalizer
without interference
Rugged & Reliable
Ensure yea
trouble free operation
Marine
Trucking
RV
Military
Equalize any 24V Battery System
The BCD301-24-12 is a Battery Equalizer that safely permits 12 Volts to be drawn of a 24V Battery bank. The unit is connected across the 24V battery bank, and its output is connected to the 12V midpoint of the battery bank. 12 Volt loads may now be connected to the lower battery, and providing the average load is less than the output capacity of the Battery Equalizer, both batteries will be maintained at the correct voltage. The BCD301-24-12 has a capacity of 25 amps. Units can be connected in parallel for even greater capacity.
The way that these units work is that the output is set to exactly ½ of the input voltage. Then as the load on the lower battery is applied, the unit takes current from the upper battery and feeds it to the lower battery to keep each at exactly ½ of the total voltage. The units are compatible with all 24V battery chargers and alternators.
Available options include a remote control and/or extra-wide temperature. We are confident that you will get many years of reliable service from this Battery Equalizer.
Maintains voltage across both 12V batteries in a 24 volt bank and permits 12V loads to be applied to the lower battery.
Audible & visual indicators for overload, low input voltage, low output voltage & over­temperature
Ultra-quiet low EMI operation
Reverse input protection
Current limit ing
Short circuit protection
Over-temperature shutdown
Can be left permanently
connected
Dry contact output fail relay
Remote control option
Spark-free connection
Wide-Temperature
operation Available
Conformal coating and/or
harsh environment ruggedization available
Output overvoltage crowbar
3 year parts and labour
warranty
Page 2
-25° to 40°C @ maximum output (Optional -40°C extra wide-temp. operation avail.)
0 - 95°C Relative Humidity (non-condensing) with optional conformal coating
Audible Noise
NONE Ødb @ 3 ft
Typical Service Life
> 10 yrs. (87,600 hrs)
Input Amps (max)
15
Input Fuse (AGC)
25A
Noise on Input
Low Input Voltage Alarm
Output Nominal (op)
Output Volts (DC)
Input Volts / 2 ± 0.05 V
Charging Amps
25
Output Crowbar
Output Fuse (AGC)
30A x 2
Output Ripple & Noise
< 10 mV
Battery Banks
1
Stages
2
Regulation (Line & Load)
< +/- 0.5%
Duty Cycle
Continuous 100% for 24 hours per day
Efficiency
Length
9.1 in / 23.1 cm
Width
Height
2.5 in / 6.4 cm
Material
Marine Grade Aluminium
Finish
Black Anodize / Powder Epoxy Coat
Fastenings
All 18-8 Stainless Steel
Weight
4.0 lb / 1.8 kg
#12 AWG Input Wires (Positive & Negative) Four contact output terminals
Warranty
3 years
Safety
Built to meet UL458 & CSA22.2.107.1
Available From:
Model Number BCD301-24-12
Input Volts (DC)
20 – 30
< 10 mV
21.0 V
Operating Temp. Range
Humidity
Isolation
Derate Linearly 2.5% per °C from 40°C
Any Input or Output to Case 500 VDC Input to Output – Common Negative
12
7.8 in / 19.8 cm
16.0 ± 0.5V
Connections
> 85% @ Maximum Output
Loading...