Page 1
(Shown with Optional Digital Meter)
Power sensitive electronics
Ensure years of safe and
Marine & other Rugged Environments
Military Applications (COTS)
DC Battery Charger s
BCD1015 Isolated Battery Charger
• Ultra-Quiet
•
without interference
• Rugged & Reliable
•
trouble free operation
• Fast & Accurate Charging
•
• Electric Utilities and Substations
• Manufacturing Plants
• Steel Mills
•
• Industrial Controls
• OEM Applications
• Solar / Alternative Power Systems
• Fuel Cells
• Charge any DC/DC System
The model BCD1015 DC Battery Charger charges either 12V, 24V or
48V batteries from a 24V, 48V or 72VDC power source. Other battery
voltages up to 56 volts are also available by special order.
The all-new Current Mode switching design offers increased power and
reliability in a compact package. The low ripple charging profile and
standard equalize cycle greatly increases the lifetime of expensive
battery systems. Extra input and output filtering reduce EMI to
extremely low levels. Reliability features include an input fuse, thermal
shutdown, current limiting, reverse battery hookup protection and output
short circuit shutdown with automatic recovery.
The output voltage is easily adjusted 1.0 volts above or below the
standard output voltage to accommodate special charging requirements. Optional features include a Digital Volt/Ammeter, Remote
Control Panel, and/or 19” R ack m ountin g. We are confident that you will
get many years of reliable service from this DC Battery Charger.
• Fully Isolated Design
• Adjustable output voltage for
charging standard or deep cycle
lead-acid, VRLA or Gel cell type
battery
• Transient Voltage Suppressor
• Extremely rugged and well suited
for marine and other demanding
environments
• High tolerance for shock and
vibration
• Ultra-quiet low EMI operation
• Can be left permanently
connected
• Spark free connection
• User selectable 2 or 3
stage charging profile
• Audible & visual indicators
for output overload, low
input voltage, low output
voltage & over-temperature
• Over-temperature
shutdown
• Short circuit protection
• Output over-voltage
crowbar
• Dry contact output fail relay
• 3 year parts and labour
warranty
Page 2
-25° to +40°C @ maximum output
0 - 95°C Relative Humidity
(non-condensing) with optional conformal coating
Audible Noise
NONE Ødb @ 3 ft (34.5 dB when fan operating)
Typical Service Life
> 10 yrs. (87,600 hrs)
Nominal (ip)
24 48 72
Actual (Vdc)
20-35 40-60 65-90
Input Amps (max)
66.7 34 21
Input Fuse (ATC)
40 x 2 20 x 2 25 x 1
Output Nominal (op)
12 24 48
Output Volts (DC)
Absorption Voltage (Vdc)
14.4 28.8 57.6
Charging Amps
60 40 20
Absorption to Float
Output Adjustment
± 1.0 V
Output Fuses (ATC)
40 x 2 40 x 2 25 x 2
Battery Banks
1 or 2 (3 Bank Option Available)
Battery Size (Amp Hrs.)
240-360 160-240 80-120
Output Crowbar
16.0 ± 0.5V 32.0 ± 1.0V 63.9 ± 2.0V
Output Ripple & Noise
< 50 mV
Regulation (Line & Load)
< +/- 0.5%
Temperature Comp.
-30 mV/°C -60 mV/°C -120 mV/°C
Duty Cycle
Continuous 100% for 24 hours per day
Efficiency
Stages
2 or 3 (user selectable)
Length
14.5 in / 36.8 cm
Width
9.9 in / 25.1 cm
Height
5.0 in / 12.7 cm
Clearance
Material
Marine Grade Aluminium
Finish
Black Anodize / Powder Epoxy Coat
Fastenings
All 18-8 Stainless Steel
Weight
12.0 lb / 5.5 kg
Connections
Four contact output terminals
Warranty
3 years
Safety
Built to meet UL458 & CSA 22.2.107.
Available From:
Noise on Input
< 50 mV
13.6 ± 0.05 27.2 ± 0.05 54.4 ± 0.05
9.0 Amps 6.0 Amps 3.0 Amps
> 80% @ Maximum Output
Operating Temp.
Range
Humidity
Isolation
Derate Linearly 2.5% per °C from 40°C
(Optional -40°C extra wide-temp. operation avail.)
Input-Case & Input-Output 1500VDC (500V @ 24V I/P)
Output-Case 500VDC (1500VDC @ 48V O/P)
1 inch (2.5 cm) all around
Loading...