ANALOG DEVICES UG-200 Service Manual

Evaluation Board User Guide
09436-001
One Technology Way P. O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com
UG-200
Evaluating the AD9467 16-Bit, 200 MSPS/250 MSPS ADC

FEATURES

Full featured evaluation board for the AD9467 SPI and alternate clock options Internal and external reference options VisualAnalog and SPI Controller software interfaces

EQUIPMENT NEEDED

Analog signal source and antialiasing filter 2 switching power supplies (6.0 V, 2.5 A) CUI EPS060250UH-
PHP-SZ, included
PC running Windows® 98 (2nd ed.), Windows 2000,
Windows ME, or Windows XP USB 2.0 port, recommended (USB 1.1 compatible) AD9467 evaluation board HSC-ADC-EVALCZ FPGA-based data capture kit

DOCUMENTS NEEDED

AD9467 data sheet HSC-ADC-EVALCZ data sheet, High Speed Converter
Evaluation Platform (FPGA-based data capture kit)
AN-905 Application Note, VisualAnalog Converter Evaluation
Tool Version 1.0 User Manual
AN-878 Application Note, High Speed ADC SPI Control Software AN-877 Application Note, Interface to High Speed ADCs via SPI

SOFTWARE NEEDED

VisualAnalog SPI Controller

GENERAL DESCRIPTION

This document describes the evaluation board for the AD9467, which provides all of the support circuitry required to operate the AD9467 in its various configurations. The application software used to interface with the device is also described.
The AD9467 data sheet, available at www.analog.com, which provides additional information, should be consulted when using the evaluation board. All documents and software tools are available at http://www.analog.com/fifo. For any questions, send an email to highspeed.converters@analog.com.
Figure 1. AD9467-250EBZ Evaluation Board and HSC-ADC-EVALCZ Data Capture Board
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS.

TYPICAL MEASUREMENT SETUP

Rev. 0 | Page 1 of 28
Loading...