Evaluation Board User Guide
UG-115
One Technology Way • P. O . Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel : 781.329.4700 • Fax : 781.461.3113 • www.analog.com
Universal Evaluation Board for Triple, High Speed Op Amps
Offered in 16-Lead, 4 mm × 4 mm LFCSP Packages
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
GENERAL DESCRIPTION
The EB-O16CP44-3Z universal evaluation board is designed
to help users evaluate the triple, high speed op amps offered in
16-lead LFCSP packages. The EB-O16CP44-3Z is a bare board
(that is, there are no components soldered to the board) that
enables users to quickly prototype a variety of triple op amp
circuits, which minimizes risk and reduces time to market.
Figure 1 shows the component side of the bare evaluation board,
and Figure 2 shows the circuit side of the bare evaluation board.
The evaluation board is a 2-layer printed circuit board (PCB)
that accepts SMA edge-mounted connectors on the inputs and
outputs for efficient connection to test equipment or other circuitry.
The ground plane, component placement, and supply bypassing
are designed to minimize parasitic inductances and capacitances.
Figure 3 shows the evaluation board schematic. The PCB layout
pattern for the component side is shown in Figure 4, and the
PCB layout pattern for the circuit side is shown in Figure 5.
The C1 to C9, C12, C21, and C22 capacitors are not needed for
normal operation.
EVALUATION BOARD COMPONENT AND CIRCUIT SIDE DIAGRAMS
NOTES
1. THE EVAL UATION BOARD SILKSCREEN PART NUMBER LABELLING O N
YOUR BOARD MAY BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 1. EB-O16CP44-3Z Component Side of Evaluation Board
NOTES
08927-001
1. THE EVAL UATION BOARD SILKSCREEN PART NUMBER LABELLING O N
YOUR BOARD MAY BE DI FFERENT FROM WHAT IS SHOWN HERE.
Figure 2. EB-O16CP44-3Z Circuit Side of Evaluation Board
08927-002
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
UG-115 Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
General Description ......................................................................... 1
Evaluation Board Component and Circuit Side Diagrams ......... 1
Revision History ............................................................................... 2
REVISION HISTORY
3/10—Revision 0: Initial Version
Evaluation Board Schematic and Artwork .....................................3
Ordering Information .......................................................................5
Bill of Materials ..............................................................................5
Rev. 0 | Page 2 of 8
Evaluation Board User Guide UG-115
EVALUATION BOARD SCHEMATIC AND ARTWORK
08927-003
JOHNSON 142-0701-801
AGND
1
5432
J8
0402
C21*
0402
R22*
JOHNSON 142-0701-801
AGND
1
5432
J6
AGND
402
C9*
0402
R18*
0402
R16*
C6*
R10*
0402
R6*
0402
C3*
0402
AGND
AGND
C20
10UF
N
P
0402
R21*
C18C16
P
AGND
0402
.1UF
N
C14
.1UF
10UF
C11
-VS
.1UF
+VS
0402
R14*
R7*
0402
R5*
0402
C2*
0402
AGND
U1
13
14
15
16
PAD
-VS
TP7
-VS
-IN1
0402
C12*
0402
R19*
121110
OUT1
+IN1
1
BLK
1
JOHNSON 142-0701-801
AGND
1
5432
J9
0402
AGND
+VS
0402
R20*
9
-IN2
+VS
+VS
OUT2
NC
PD/DIS
+IN2
NC
432
R2*
0402
AGND
C22*
0402
R23*
10UF
C19
AGND
N
P
.1UF.1UF
C13 C17
-VS
16-LEA D LFCSP
-VS
8
OUT3
7
-IN3
6
+IN3
5
MOLEX 22-03-2031
P1
2
1
1K
R4
R3
-VS
+VS
AGND
N
P
C15
10UF
C8*
0402
0402
C10
.1UF
C7
R13
0402
0402
R9*
R8*
0402
0402
3
1K
C4*
0402
J1
5432
1
R17*
0402
R15*
AGND
0402
0402
R12*
R11*
C5*
0402
AGND
J2
5432
1
AGND
AGND
JOHNSON 142-0701-801
AGND
1
5432
J7
AGND
J4
1
-VS
+VS
TP5 TP6
J5
5432
JOHNSON 142-0701-801
BLU
1
RED
1
5432
1
AGND
P2
AGND
+VS
-VS
AGND
JOHNSON 142-0701-801
MOLEX 22-28-4033
321
AGND
GND4
1
BLK BLK
GND3
TP3 TP4
1
GND2
1
BLK BLK
GND1
1
TP1 TP2
C1* R1*
0402 0402
J3
5432
1
AGND
JOHNSON 142-0701-801
JOHNSON 142-0701-801
AGND
JOHNSON 142-0701-801
*USER DEFINED VALUE.
Figure 3. EB-O16CP44-3Z Universal Evaluation Board Schematic
Rev. 0 | Page 3 of 8
UG-115 Evaluation Board User Guide
Figure 4. Board Layout Pattern, Component Side
8927-004
Figure 5. Board Layout Pattern, Circuit Side
08927-005
Rev. 0 | Page 4 of 8
Evaluation Board User Guide UG-115
ORDERING INFORMATION
BILL OF MATERIALS
Table 1.
Quantity Reference Designator Description Package
1 P2 Connector, PCB, header Molex 22-28-4033
1 U1 GEN_LFCSP16-4X4-PAD2_1X2_1 4 mm × 4 mm LFCSP
2 R3, R4 1 kΩ resistor R0402
4 C14, C15, C19, C20 10 μF, 15 V capacitor C7343
4 C10, C11, C17, C18 0.1 μF capacitor C0508
2 C13, C16 0.1 μF, 25 V capacitor C0508
1 P1 Connector, PCB, straight, header Molex 22-03-2031
9 J1 to J9 SMA, end launch receptacle connector Johnson 142-0701-801
1 TP5 Test point, red Components Corp. TP-104-01-02
4 TP1 to TP4 Test point, black Components Corp. TP-104-01-00
1 TP6 Test point, blue Components Corp. TP-104-01-06
12 C1 to C9, C12, C21, C22 User-defined capacitor C0402
21 R1, R2, R5 to R23 User-defined resistor R0402
Rev. 0 | Page 5 of 8
UG-115 Evaluation Board User Guide
NOTES
Rev. 0 | Page 6 of 8
Evaluation Board User Guide UG-115
NOTES
Rev. 0 | Page 7 of 8
UG-115 Evaluation Board User Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the pers onal jurisdiction and venu e of such courts. The United Nations Conventi on on Contracts for the Internation al Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08927-0-3/10(0)
Rev. 0 | Page 8 of 8
Loading...