ANALOG DEVICES EVAL-ADF4212EB1 Service Manual

查询EVAL-ADF4212EB1供应商查询EVAL-ADF4212EB1供应商
Evaluation Board For PLL Frequency
a
FEATURES Self Contained Evaluation Board including Synthesizer,
VCOs, Loop Filters for generating GSM 1800 standards (1700MHz to 1800MHz RF, 520MHz to 560MHz IF).
RF and IF filters designed for 20kHz Loop Bandwidth, and
200kHz Channel Spacing.
thesizer functions from PC using Windows 95/98/NT. Battery Operated: Choice of 3V or 5V supplies On-Board Monitoring of Voltage and Current Typical RF Phase Noise Performance of -84dBc/Hz @1kHz
offset. Typical IF Phase Noise Performance of -90dBc/Hz @1kHz
offset. Typical Spurious Performance of batter than -80dBc
@200kHz offset.
BLOCK DIAGRAM
Synthesizer
EV AL-ADF4212EB1
GENERAL DESCRIPTION
This board is designed to allow the user to evaluate the performance of the ADF4212 Frequency Synthe­sizer for PLL's (Phase Locked Loops). The block diagram of the board is shown below. It contains the footprint for a ADF4212 synthesizer, a pc connector, SMA connector for the reference input, power sup­plies and RF output. There is also a loop filter and a VCO for both the RF and IF section on board. A cable is included with the board to connect to a pc printer port.
The package also contains Windows 95/98/NT soft­ware to allow easy programming of the synthesizer.
V
RF
REF
V
DD
VCO
OUT
IN
VCO 1
(Vari -L )
VCO 190-XXXT
SMA
Socket
TCXO
Vectron
EVAL -ADF42 1XE B1
PC CO NNECTO R
9V BA TTER Y
POWER SWITCH
ON OFF
ADF421X
VCO 190-XXXT
VCO 1
(Vari -L )
AD7706
SMA
Socket
V
P
IF
OUT
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
REV 0 11/00
© Analog Devices, Inc., 1999
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781-329-4700 Fax: 781-326-8703
Hardware Description
The evaluation board comes with a cable for connecting to the printer port of a PC. The silk screen and cable diagram for the evaluation board are shown below. The board schematic is shown on pages 3 and 4.
EV AL-ADF4212EB1
EVAL-ADF411X EVAL-ADF421X
1
6
2
7
3
8
4
9
5
9 Way
Female D-Type
To ADF411X ADF421X
Evaluation
Board
Brown - DATA
Figure 2. PC Cable Diagram
The AD7706 A/D converter is used to monitor the power supply voltage and current consumption of the ADF4212. This helps the user pick the optimum synthesizer settings for power consumption and also provides an alert if the battery voltage is too low to sustain the required 3V or 5V for the board supply.
Black - CLK
Red - LE
Orange - CE
White - GND
Yellow
Purple
1 2 3 4 5
6
7 8 9
10
Blue
11 12 13
25 Way Male
D-Type
To
PC Printer Port
14 15 16 17 18 19 20 21 22 23 24 25
PC
Figure 1. Evaluation Board Silkscreen
The board is powered from a single 9V battery. The power supply ciruitry allows the user to choose either 3V or 5V for the ADF4212 V supply. The default settings are 3V for the ADF4212 V
and VP, and for the VCO
DD
DD
and 5V for the ADF4212 VP and for the VCO supply. It
is very important to note that the ADF4212 V never exceed the ADF4212 V
. This can damage the de-
P
should
DD
vice.
All components necessary for LO generation are catered for on-board. The TCXO connector provides the neces­sary Reference Input. The RF PLL is made up of the ADF4212, passive loop filter and the VCO 190-1750T from Vari-L. The output is available at RFOUT through a standard SMA connector. The IF PLL is made up of the ADF4212, passive loop filter and the VCO 190-540T from Vari-L. The output is available at IFOUT through a standard SMA connector. If the user wishes they may use their own power supplies and reference input. In this case, they need to insert SMA connectors to as shown on the silkscreen and block diagram.
–2–
REV 0 11/00
EV AL-ADF4212EB1
Figure 3. Evaluation Board Circuit Diagram (Page 1)
–3–
REV 0 11/00
EV AL-ADF4212EB1
Figure 4. Evaluation Board Circuit Diagram (Page 2)
–4–
REV 0 11/00
Software Description
The software comes on a CD. If the user double clicks on “ADF4XXXEvaluationSoftware.exe” on the CD, then the install wizard installs the software. Follow the on-screen directions. The software will be installed in a default directory called “C:\Program Files\Analog Devices\ADF4xxx Evaluation Software”. To run the software, simply double-click on “ADF4XXX Eval Software.exe”. The front panel of the evaluation board software is shown below. When the device window appears, choose ADF4212 and click OK. The main software panel now appears. Click on Eval Board in the top right hand side of the main software screen. The Eval Board Window now appears. Click on Eval-ADF4212EB1 and Click OK. This will set the cor­rect data for the board configuartion. The device has now
EV AL-ADF4212EB1
been programmed and other features can now be exam­ined by the user.
Figure 5. Software Front Panel
–5–
REV 0 11/00
EV AL-ADF4212EB1
Table 1. Bill of Materials for the EVAL-ADF4212EB1
Qty Reference Description Manufacturer PCB DECAL VALUE
1 U1 ADF4212BRU ADI TSSOP-20 ADF4212BRU 1 U2 AD7706BR ADI SO16WB AD7706BR 1 U3 AD780AR ADI SO8NB AD780AR 1 U4 ADP3300ART-5 ADI SOT23-6 ADP3300ART-5 1 U5 ADP3300ART-3 ADI SOT23-6 ADP3300ART-3 1 VCO1 1750MHz VCO Vari-L VCO190-1750T 1 VCO2 540MHz VCO Vari-L VCO190-540T 1 Y1 4.9152MHz Crystal 1 Y2 10 MHz TCXO 1 D1 SD103C Schottky Diode General Semiconductor DO35 SD103C 1 D2 IN4001 D035 FEC 365-117 1 D3 Red Low Power LED Vishay LED FEC 657-130 1 D4 Green Low Power LED (Do Not Insert) Vishay LED FEC 657-141
6 C1 C5 C7 C9 C11 C41 Multi Layer Ceramic Capacitor Murata Case 0603 0.1uF 1 C2 Tantalum Capacitor AVX CAP\TAJ_B 10uF 6.3V 3 C3 C29 C31 Tantalum Capacitor AVX CAP\TAJ_A 22uF 6.3V 7 C4 C6 C8 C10 C12 C30 C32 Multi Layer Ceramic Capacitor Murata Case 0603 10pF 2 C13-14 Multi Layer Ceramic Capacitor Murata Case 0603 1nF 6 C15-17 C26-28 Multi Layer Ceramic Capacitor Murata Case 0603 100pF 1 C18 Multi Layer Ceramic Capacitor Murata Case 0805 820pF 1 C19 Multi Layer Ceramic Capacitor Murata Case 0805 8.2nF 1 C20 Multi Layer Ceramic Capacitor Murata Case 0805 8pF 2 C21-22 Multi Layer Ceramic Capacitor Murata Case 0603 33pF 1 C23 Multi Layer Ceramic Capacitor Murata Case 0805 1nF 1 C24 Multi Layer Ceramic Capacitor Murata Case 0805 10nF 1 C25 Multi Layer Ceramic Capacitor Murata Case 0805 75pF 3 C33 C36 C40 Multi Layer Ceramic Capacitor Murata Case 0603 10nF 2 C34 C37 Tantalum Capacitor AVX CAP\TAJ_A 1uF 16V 2 C35 C38 Tantalum Capacitor AVX CAP\TAJ_A 4.7uF 10V 2 C39 C42 Tantalum Capacitor AVX CAP\TAJ_A 10uF 6.3V
Vectron International Vectron International
HC 49 low profile VXA 4 - 1011
T-1185
1 R1 Resistor (Surface Mount) Bourns Case 0805 20r 1.0% 7 R2 R5-10 Resistor (Surface Mount) Bourns Case 0603 330r 1.0% 1 R3 Resistor (Surface Mount) Bourns Case 0603 3k3 1.0% 1 R4 Do Not Insert Bourns Case 0603 1 R11 Do Not Insert Bourns Case 0603 6 R12-14 R21-23 Resistor (Surface Mount) Bourns Case 0603 18r 1.0% 2 R15 R24 Resistor (Surface Mount) Bourns Case 0603 51r 1.0% 1 R16 Resistor (Surface Mount) Bourns Case 0805 4k7 1.0% 1 R17 Resistor (Surface Mount) Bourns Case 0805 22k 1.0% 1 R18 Resistor (Surface Mount) Bourns Case 0603 1M 1.0% 1 R19 Resistor (Surface Mount) Bourns Case 0805 3k9 1.0% 1 R20 Resistor (Surface Mount) Bourns Case 0805 22k 1.0% 1 R25 Resistor (Surface Mount) Bourns Case 0805 3k9 1.0% 1 R26 Resistor (Surface Mount) Bourns Case 0603 2k7 1.0% 3 R27-29 Resistor (Surface Mount) Bourns Case 0603 10k 1.0% 6 R30-33 R40-41 Resistor (Surface Mount) Meggitt Case 0603 100k 0.1% 2 R34-35 Resistor (Surface Mount) Bourns Case 0603 0r 1.0% 2 R36 R37 Resistor (Surface Mount) Bourns Case 0603 330k 1.0% 2 R38 R39 Resistor (Surface Mount) Bourns Case 0603 0r 1.0% 1 R42 Resistor (Surface Mount) Bourns Case 0603 4k7 1.0%
1 SW1 Push Button Switch Omron SW\PB-SMALL FEC 176-986 1 SW2 SPDT Switch - (Washable) Apem SW_SIP-3P FEC 150-559
21 T1-21 Red Testpoint W Hughes TESTPOINT FEC-240-345
1 J1 9 PIN D-TYPE MALE (HORIZ) McMurdo DCON9M FEC 150-750 4 J2 J3 J4 J5 J6 Do Not Insert SMA 2 J6 J7 GOLD 50Ω SMA SOC KE T Pasternack SMA PE4118
3 LK1 LK4 LK5 3 pin header Harwin SIP-3P FEC 512-047 3 LK2-A LK3-B LK6-A Wire link 3 LK1 LK4 LK5 Shorting S hunt Harwin FEC 150-410 4 Each Corner Rubber Stick-On Feet 3M FEC 148-922
2 P1 Pair PCB snap-on battery connector Keystone BATT_PP3 FEC 723-988 1 P1 9V PP3 Battery Duracell FEC 908-526
1 PCB EVAL-ADF42 1XEB-5 (Rev. A)
Parts Fr e e is su ed b y ADI.
–6–
REV 0 11/00
Loading...