Analog Devices ADP3307 Datasheet

High Accuracy anyCAP™

V

OUT

= +3.3V

V

IN

+
–

ADP3307-3.3

NR

OUT

ERR

ON

OFF

SD

GND

R1
330kV

IN

E

OUT

C2

0.47mF

C1

0.47mF

a

FEATURES

0.8% Accuracy Over Line and Load Regulations @ +258C
Ultralow Dropout Voltage: 120 mV Typical @ 100 mA
Requires only C
anyCAP = Stable with All Types of Output Capacitors

(Including MLCC)
Current and Thermal Limiting
Low Noise
Dropout Detector
Low Shutdown Current: 1 mA

3.0 V to 12 V Supply Range
–208C to +858C Ambient Temperature Range
Several Fixed Voltage Options
Ultrasmall SOT-23-6 (RT-6) Package
Excellent Line and Load Regulations

APPLICATIONS
Cellular Telephones
Notebook, Palmtop Computers
Battery Powered Systems
PCMCIA Regulator
Bar Code Scanners
Camcorders, Cameras

= 0.47 mF for Stability

O

100 mA Low Dropout Linear Regulator

ADP3307

FUNCTIONAL BLOCK DIAGRAM

ADP3307

M

BANDGAP

REF

OUT

R1

NR

R2

ERR

SD

IN

THERMAL

PROTECTION

Q2

Q1

CC

DRIVER G

GND

GENERAL DESCRIPTION

The ADP3307 is a member of the ADP330x family of precision
low dropout anyCAP voltage regulators. The ADP3307 stands
out from the conventional LDOs with a novel architecture and
an enhanced process. Its patented design requires only a 0.47 µF
output capacitor for stability. This device is stable with any type
of capacitor regardless of its ESR (Equivalent Series Resistance)
value, including ceramic types (MLCC) for space restricted
applications. The ADP3307 achieves exceptional accuracy of
±0.8% at room temperature and ±1.4% overall accuracy over
temperature, line and load regulations. The dropout voltage of
the ADP3307 is only 120 mV (typical) at 100 mA.

The ADP3307 operates with a wide input voltage range from

3.0 V to 12 V and delivers a load current in excess of 100 mA.
It features an error flag that signals when the device is about to

anyCAP is a trademark of Analog Devices, Inc.

Figure 1. Typical Application Circuit

lose regulation or when the short circuit or thermal overload
protection is activated. Other features include shutdown and
optional noise reduction capabilities. The ADP330x anyCAP
LDO family offers a wide range of output voltages and output
current levels from 50 mA to 300 mA:

ADP3300 (50 mA, SOT-6)
ADP3307 (100 mA, SOT)
ADP3301 (100 mA, SO-8)
ADP3302 (100 mA, Dual Output)
ADP3303 (200 mA)
ADP3306 (300 mA)

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] World Wide Web Site: http://www.analog.com
Fax: [phone] © Analog Devices, Inc., 1997

REV. 0

Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.

ADP3307–SPECIFICA TIONS

(@ TA = –208C to +858C, VIN = 7 V, CIN = 0.47 mF, C

= 0.47 mF, unless

OUT

otherwise noted)1 The following specifications apply to all voltage options.

Parameter Symbol Conditions Min Typ Max Units

OUTPUT VOLTAGE ACCURACY V

OUT

VIN = V
I
T
V

OUTNOM

= 0.1 mA to 100 mA

L

= +25°C –0.8 +0.8 %

A

= V

IN

OUTNOM

+ 0.3 V to 12 V

+ 0.3 V to 12 V

IL = 0.1 mA to 100 mA –1.4 +1.4 %

∆V

∆V

∆V

∆I

GND

O

IN

O
L

LINE REGULATION V

LOAD REGULATION I

GROUND CURRENT I

IN

= V

OUTNOM

+ 0.3 V to 12 V

TA = +25°C 0.02 mV/V

= 0.1 mA to 100 mA

L

TA = +25°C 0.06 mV/mA
IL = 100 mA 0.76 2.0 mA

IL = 0.1 mA 0.19 0.3 mA

GROUND CURRENT IN DROPOUT I

GND

VIN = 2.5 V
IL = 0.1 mA 0.6 1.2 mA

V

DROPOUT VOLTAGE V

DROP

= 98% of V

OUT

OUTNOM

IL = 100 mA 0.126 0.22 V
I

= 10 mA 0.025 0.07 V

L

IL = 1 mA 0.004 0.015 V

SHUTDOWN THRESHOLD V

THSD

ON 2.0 0.75 V
OFF 0.75 0.3 V

SHUTDOWN PIN INPUT CURRENT I

SDIN

0 < VSD, < 5 V 1 µA
5 < VSD ≤ 12 V @ VIN = 12 V 22 µA

GROUND CURRENT IN SHUTDOWN I

Q

MODE T

VSD = 0 V, VIN = 12 V

= +25°C 0.005 1 µA

A

V

= 0 V, VIN = 12 V

SD

TA = +85°C 0.01 3 µA

OUTPUT CURRENT IN SHUTDOWN I

OSD

TA = +25°C @ VIN = 12 V 2 µA

MODE TA = +85°C @ VIN = 12 V 4 µA

ERROR PIN OUTPUT LEAKAGE I

EL

VEO = 5 V 13 µA

ERROR PIN OUTPUT

“LOW” VOLTAGE V
PEAK LOAD CURRENT I
OUTPUT NOISE @ 3.3 V OUTPUT V

EOL

LDPK

NOISE

I

= 400 µA 0.12 0.3 V

SINK

VIN = V

OUTNOM

+ 1 V 170 mA

f = 10 Hz–100 kHz
C

= 0 100 µV rms

NR

CNR = 10 nF, CL = 10 µF30µV rms

NOTES

1

Ambient temperature of +85°C corresponds to a junction temperature of 125°C under typical full load test conditions.

Specifications subject to change without notice.

–2–

REV. 0

ADP3307

ABSOLUTE MAXIMUM RATINGS*

Input Supply Voltage . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V

Shutdown Input Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V

Error Flag Output Voltage . . . . . . . . . . . . . . . –0.3 V to +16 V

Noise Bypass Pin Voltage . . . . . . . . . . . . . . . . –0.3 V to +5 V

Power Dissipation . . . . . . . . . . . . . . . . . . . .Internally Limited

Operating Ambient Temperature Range . . . –55°C to +125°C
Operating Junction Temperature Range . . . –55°C to +125°C

θ

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230°C/W

JA

θ

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W

JC

Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C

Lead Temperature Range (Soldering 10 s) . . . . . . . . .+300°C

Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . .+215°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . .+220°C

*This is a stress rating only; operation beyond these limits can cause the device to

be permanently damaged.

ORDERING GUIDE

Output Package Marking

Model Voltage Option Code

ADP3307ART-2.7 2.7 V RT-6 LTC
ADP3307ART-3 3.0 V RT-6 LUC
ADP3307ART-3.2 3.2 V RT-6 LVC
ADP3307ART-3.3 3.3 V RT-6 LWC

Contact the factory for the availability of other output voltage options.

Other Members of anyCAP Family

1

PIN FUNCTION DESCRIPTIONS

Pin Name Function

1 GND Ground Pin.
2 NR Noise Reduction Pin. Used for further reduc-

tion of the output noise. (See text for details.)
No connection if not used.

3 SD Active Low Shutdown Pin. Connect to ground

to disable the regulator output. When shut­down is not used, this pin should be con­nected to the input pin.

4 OUT Output of the Regulator, fixed 2.7 V, 3.0 V,

3.2 V or 3.3 V output voltage. Bypass to

ground with a 0.47 µF or larger capacitor.
5 IN Regulator Input.
6 ERR Open Collector Output that goes low to indi-

cate that the output is about to go out of

regulation.

PIN CONFIGURATION

GND

NR

SD

1

ADP3307

2

TOP VIEW

(Not to Scale)

3

6

ERR

5

IN

4

OUT

Output Package

Model Current Options

2

Comments

ADP3300 50 mA SOT-23-6 High Accuracy
ADP3301 100 mA SO-8 High Accuracy
ADP3302 100 mA SO-8 Dual Output
ADP3303 200 mA SO-8 High Accuracy
ADP3306 300 mA SO-8, TSSOP-14 High Accuracy,

High Current

NOTES

1

See individual data sheets for detailed ordering information.

2

SO = Small Outline, SOT-23 = Surface Mount, TSSOP = Thin Shrink Small
Outline.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADP3307 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

–3–REV. 0