Analog Devices ADP3300 b Datasheet

High Accuracy anyCAP

E

®

a

50 mA Low Dropout Linear Regulator

FEATURES
High Accuracy Over Line and Load: ⴞ0.8% @ 25ⴗC,

ⴞ1.4% Over Temperature
Ultralow Dropout Voltage: 80 mV Typical @ 50 mA
Requires Only C

= 0.47 ␮F for Stability

O

anyCAP = Stable with All Types of Capacitors

(Including MLCC)
Current and Thermal Limiting
Low Noise
Dropout Detector
Low Shutdown Current: 1 ␮A

3.0 V to 12 V Supply Range
–40ⴗC to +85ⴗC Ambient Temperature Range
Several Fixed Voltage Options
Ultrasmall SOT-23 6-Lead Package
Excellent Line and Load Regulation

APPLICATIONS
Cellular Telephones
Notebook, Palmtop Computers
Battery Powered Systems
PCMCIA Regulators
Bar Code Scanners
Camcorders, Cameras

GENERAL DESCRIPTION

The ADP3300 is a member of the ADP330x family of precision
low dropout anyCAP voltage regulators. The ADP3300 stands
out from conventional LDOs with a novel architecture and an
enhanced process. Its patented design requires only a 0.47 µF
output capacitor for stability. This device is stable with any
capacitor, regardless of its ESR (Equivalent Series Resistance)
value, including ceramic types (MLCC) for space restricted appli­cations. The ADP3300 achieves exceptional accuracy of ±0.8%
at room temperature and ± 1.4% overall accuracy over tempera­ture, line and load variations. The dropout voltage of the
ADP3300 is only 80 mV (typical) at 50 mA.

The ADP3300 operates with a wide input voltage range from

3.0 V to 12 V and delivers a load current in excess of 50 mA.
It features an error flag that signals when the device is about to
lose regulation or when the short circuit or thermal overload

ADP3300

FUNCTIONAL BLOCK DIAGRAM

CC

BANDGAP

R1
330k⍀

E

ADP3300

g

m

REF

+

OUT

+

–

C2

0.47␮F

OUT

R1

R2

V

= +5V

OUT

IN

RR

SD

V

IN

0.47␮F

Q2

C1

THERMAL

PROTECTION

+

ADP3300-5

IN

ON

OFF

SD

Q1

DRIVER

GND

NR

OUT

ERR

GND

Figure 1. Typical Application Circuit

protection is activated. Other features include shutdown and
optional noise reduction capabilities. The ADP330x anyCAP LDO
family offers a wide range of output voltages and output current
levels from 50 mA to 200 mA:

ADP3301 (100 mA)
ADP3302 (100 mA, Dual Output)
ADP3303 (200 mA)

anyCAP is a registered trademark of Analog Devices Inc.

REV. B

Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] www.analog.com
Fax: [phone] © Analog Devices, Inc., 2001

ADP3300–SPECIFICATIONS

(@ TA = –40ⴗC to +85ⴗC, VIN = 7 V, CIN = 0.47 ␮F, C
otherwise noted)

= 0.47 ␮F, unless

OUT

Parameter Symbol Conditions Min Typ Max Unit

OUTPUT VOLTAGE V

OUT

ACCURACY I

VIN = V

T

V

OUT(NOM)

= 0.1 mA to 50 mA

L

= 25°C –0.8 +0.8 %

A

= V

IN

OUT(NOM)

0.3 V to 12 V

0.3 V to 12 V

IL = 0.1 mA to 50 mA –1.4 +1.4 %

LINE REGULATION ∆V

∆V

LOAD REGULATION ∆V

∆I

GROUND CURRENT I

GND

O

IN

O

L

= V

IN

OUT(NOM)

TA = 25°C 0.02 mV/V

IL = 0.1 mA to 50 mA
TA = 25°C 0.06 mV/mA

IL = 50 mA 0.55 1.7 mA

0.3 V to 12 V

V

IL = 0.1 mA 0.19 0.3 mA

GROUND CURRENT I

GND

VIN = 2.5 V

IN DROPOUT IL = 0.1 mA 0.6 1.2 mA

DROPOUT VOLTAGE V

DROP

V

= 98% of V

OUT

OUT(NOM)

IL = 50 mA 0.08 0.17 V
I

= 10 mA 0.025 0.07 V

L

IL = 1 mA 0.004 0.03 V

SHUTDOWN THRESHOLD V

THSD

ON 2.0 0.75 V
OFF 0.75 0.3 V

SHUTDOWN PIN I

SDIN

0 < V

INPUT CURRENT 5 < V

GROUND CURRENT IN I

Q

VSD = 0, VIN = 12 V

SHUTDOWN MODE T

V

≤ 5 V 1 µA

SD

≤ 12 V @ VIN = 12 V 22 µA

SD

= 25°C 0.005 1 µA

A

= 0, VIN = 12 V

SD

TA = 85°C0.013µA

OUTPUT CURRENT IN I

OSD

TA = 25°C @ VIN = 12 V 2 µA

SHUTDOWN MODE TA = 85°C @ VIN = 12 V 4 µA

ERROR PIN OUTPUT

LEAKAGE I

EL

VEO = 5 V 13 µA

ERROR PIN OUTPUT

“LOW” VOLTAGE V

PEAK LOAD CURRENT I

OUTPUT NOISE V

EOL

LDPK

NOISE

@ 5 V OUTPUT C

I

= 400 µA 0.12 0.3 V

SINK

VIN = V

OUT(NOM)

1 V 100 mA

f = 10 Hz–100 kHz

= 0 100 µV rms

NR

CNR = 10 nF, CL = 10 µF30µV rms

NOTE
Ambient temperature of +85°C corresponds to a typical junction temperature of 125 °C under typical full load test conditions.

Specifications subject to change without notice.

–2–

REV. B

ADP3300

WARNING!

ESD SENSITIVE DEVICE

ABSOLUTE MAXIMUM RATINGS*

Input Supply Voltage . . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V

Shutdown Input Voltage . . . . . . . . . . . . . . . . . –0.3 V to +16 V

Error Flag Output Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V

Noise Bypass Pin Voltage . . . . . . . . . . . . . . . . . –0.3 V to +5 V

Power Dissipation . . . . . . . . . . . . . . . . . . . . Internally Limited

Operating Ambient Temperature Range . . . . –55°C to +125°C

Operating Junction Temperature Range . . . . –55°C to +125°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165°C/W

θ

JA

θ

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W

JC

Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C

Lead Temperature Range (Soldering 10 sec) . . . . . . . . . . 300°C

Vapor Phase (60 sec ) . . . . . . . . . . . . . . . . . . . . . . . . . . 215°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C

*This is a stress rating only; operation beyond these limits can cause the device to

be permanently damaged.

PIN CONFIGURATION

Pin Mnemonic Function

1 GND Ground Pin

2 NR Noise Reduction Pin. Used for further

3 SD Active Low Shutdown Pin. Connect to

4 OUT Output of the Regulator, fixed 2.7, 3.0, 3.2,

5 IN Regulator Input
6 ERR Open Collector Output which goes low to

PIN FUNCTION DESCRIPTIONS

reduction of the output noise (see text for
details). No connection if not used.

ground to disable the regulator output.
When shutdown is not used, this pin should
be connected to the input pin.

3.3 or 5 volts output voltage. Bypass to
ground with a 0.47 µF or larger capacitor.

indicate that the output is about to go out

GND

NR

SD

1

ADP3300

2

TOP VIEW

(Not to Scale)

3

6

ERR

5

IN

OUT

4

of regulation.

ORDERING GUIDE

Model Voltage Output Package Description Package Options Branding Information

ADP3300ART-2.7 2.7 V Surface Mount SOT-23-6 LAB
ADP3300ART-2.85 2.85 V Surface Mount SOT-23-6 LFB
ADP3300ART-3 3.0 V Surface Mount SOT-23-6 LBB
ADP3300ART-3.2 3.2 V Surface Mount SOT-23-6 LCB
ADP3300ART-3.3 3.3 V Surface Mount SOT-23-6 LDB
ADP3300ART-5 5.0 V Surface Mount SOT-23-6 LEB

Contact the factory for the availability of other output voltage options.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADP3300 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.

REV. B

–3–