Analog Devices ADP3300 Datasheet

High Accuracy anyCAP

ADP3300-5

3

1

6

2

NR

OUT

IN

4

R1
330kΩ

E

OUT

C2

0.47

F

V

OUT

= +5V

ON

OFF

GND

C1

0.47

F

V

IN

5

®

a

FEATURES
High Accuracy (Over Line and Load Regulations

at 25ⴗC): ⴞ0.8%
Ultralow Dropout Voltage: 80 mV Typical @ 50 mA
Requires Only C
anyCAP™ = Stable with All Types of Capacitors

(Including MLCC)
Current and Thermal Limiting
Low Noise
Dropout Detector
Low Shutdown Current: 1 ␮A

3.0 V to 12 V Supply Range
–40ⴗC to +85ⴗC Ambient Temperature Range
Several Fixed Voltage Options
Ultrasmall SOT-23 6-Lead Package
Excellent Line and Load Regulations

APPLICATIONS
Cellular Telephones
Notebook, Palmtop Computers
Battery Powered Systems
PCMCIA Regulators
Bar Code Scanners
Camcorders, Cameras

= 0.47 ␮F for Stability

O

50 mA Low Dropout Linear Regulator

ADP3300

FUNCTIONAL BLOCK DIAGRAM

ADP3300

CC

Gm

BANDGAP

REF

OUT

R1

R2

ERR

SD

IN

THERMAL

PROTECTION

Q2

Q1

DRIVER

GND

GENERAL DESCRIPTION

The ADP3300 is a member of the ADP330x family of precision
low dropout anyCAP™ voltage regulators. The ADP3300
stands out from conventional LDOs with a novel architecture
and an enhanced process. Its patented design requires only a

0.47 µF output capacitor for stability. This device is stable with
any capacitor, regardless of its ESR (Equivalent Series Resistance)

Figure 1. Typical Application Circuit

value, including ceramic types (MLCC) for space restricted appli­cations. The ADP3300 achieves exceptional accuracy of ±0.8%
at room temperature and ± 1.4% overall accuracy over tempera­ture, line and load regulations. The dropout voltage of the
ADP3300 is only 80 mV (typical) at 50 mA.

The ADP3300 operates with a wide input voltage range from

LDO family offers a wide range of output voltages and output
current levels from 50 mA to 200 mA:

ADP3301 (100 mA)
ADP3302 (100 mA, Dual Output)
ADP3303 (200 mA)

3.0 V to 12 V and delivers a load current in excess of 50 mA. It
features an error flag that signals when the device is about to
lose regulation or when the short circuit or thermal overload
protection is activated. Other features include shutdown and
optional noise reduction capabilities. The ADP330x anyCAP™

anyCAP is a registered trademark of Analog Devices Inc.

REV. A

Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] World Wide Web Site: http://www.analog.com
Fax: [phone] © Analog Devices, Inc., 2000

ADP3300–SPECIFICATIONS

(@ TA = –40ⴗC to +85ⴗC, VIN = 7 V, CIN = 0.47 ␮F, C
noted)

= 0.47 ␮F, unless otherwise

OUT

Parameter Symbol Conditions Min Typ Max Units

OUTPUT VOLTAGE V

OUT

ACCURACY I

VIN = V

T

V

OUT(NOM)

= 0.1 mA to 50 mA

L

= +25°C –0.8 +0.8 %

A

= V

IN

OUT(NOM)

+0.3 V to 12 V

+0.3 V to 12 V

IL = 0.1 mA to 50 mA –1.4 +1.4 %

LINE REGULATION ∆V

∆V

LOAD REGULATION ∆V

∆I

GROUND CURRENT I

GND

O

IN

O

L

V

IN

= V

OUT(NOM)

+0.3 V to 12 V

TA = +25°C 0.02 mV/V

IL = 0.1 mA to 50 mA
TA = +25°C 0.06 mV/mA

IL = 50 mA 0.55 1.7 mA
IL = 0.1 mA 0.19 0.3 mA

GROUND CURRENT I

GND

VIN = 2.5 V

IN DROPOUT IL = 0.1 mA 0.6 1.2 mA

V

DROPOUT VOLTAGE V

DROP

= 98% of V

OUT

OUT(NOM)

IL = 50 mA 0.08 0.17 V
I

= 10 mA 0.025 0.07 V

L

IL = 1 mA 0.004 0.03 V

SHUTDOWN THRESHOLD V

THSD

ON 2.0 0.75 V
OFF 0.75 0.3 V

SHUTDOWN PIN I

SDIN

0 < V

INPUT CURRENT 5 < V

GROUND CURRENT IN I

Q

VSD = 0, VIN = 12 V

SHUTDOWN MODE T

V

≤ 5 V 1 µA

SD

≤ 12 V @ VIN = 12 V 22 µA

SD

= +25°C 0.005 1 µA

A

= 0, VIN = 12 V

SD

TA = +85°C0.013µA

OUTPUT CURRENT IN I

OSD

TA = +25°C @ VIN = 12 V 2 µA

SHUTDOWN MODE TA = +85°C @ VIN = 12 V 4 µA

ERROR PIN OUTPUT

LEAKAGE I

EL

VEO = 5 V 13 µA

ERROR PIN OUTPUT

“LOW” VOLTAGE V

PEAK LOAD CURRENT I

OUTPUT NOISE V

EOL

LDPK

NOISE

@ 5 V OUTPUT C

I

= 400 µA 0.12 0.3 V

SINK

VIN = V

OUT(NOM)

+ 1 V 100 mA

f = 10 Hz–100 kHz

= 0 100 µV rms

NR

CNR = 10 nF, CL = 10 µF30µV rms

NOTE
Ambient temperature of +85°C corresponds to a typical junction temperature of +125 °C under typical full load test conditions.

Specifications subject to change without notice.

–2–

REV. A

ADP3300

ABSOLUTE MAXIMUM RATINGS*

Input Supply Voltage . . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V

Shutdown Input Voltage . . . . . . . . . . . . . . . . . –0.3 V to +16 V

Error Flag Output Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V

Noise Bypass Pin Voltage . . . . . . . . . . . . . . . . . –0.3 V to +5 V

Power Dissipation . . . . . . . . . . . . . . . . . . . . Internally Limited

Operating Ambient Temperature Range . . . . –55°C to +125°C

Operating Junction Temperature Range . . . . –55°C to +125°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165°C

θ

JA

θ

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C

JC

Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C

Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300°C

Vapor Phase (60 sec ) . . . . . . . . . . . . . . . . . . . . . . . . +215°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C

*This is a stress rating only; operation beyond these limits can cause the device to

be permanently damaged.

PIN CONFIGURATION

ERR

GND

NR

SD

1

ADP3300

2

TOP VIEW

(Not to Scale)

3

6

5

IN

4

OUT

ORDERING GUIDE

PIN FUNCTION DESCRIPTIONS

Pin Mnemonic Function

1 GND Ground Pin.

2 NR Noise Reduction Pin. Used for further

reduction of the output noise (see text for
details). No connection if not used.

3 SD Active Low Shutdown Pin. Connect to

ground to disable the regulator output.
When shutdown is not used, this pin should
be connected to the input pin.

4 OUT Output of the Regulator, fixed 2.7, 3.0, 3.2,

3.3 or 5 volts output voltage. Bypass to
ground with a 0.47 µF or larger capacitor.

5 IN Regulator Input.

6 ERR Open Collector Output which goes low to

indicate that the output is about to go out
of regulation.

Model Voltage Output Package Description Package Options Branding Information

ADP3300ART-2.7 2.7 V Surface Mount SOT-23-6 LAB

ADP3300ART-3 3.0 V Surface Mount SOT-23-6 LBB

ADP3300ART-3.2 3.2 V Surface Mount SOT-23-6 LCB

ADP3300ART-3.3 3.3 V Surface Mount SOT-23-6 LDB

ADP3300ART-5 5.0 V Surface Mount SOT-23-6 LEB

Contact the factory for the availability of other output voltage options.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.

WARNING!

Although the ADP3300 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.

ESD SENSITIVE DEVICE

REV. A

–3–