Analog Devices ADM1810-10AKS, ADM1810-10AKSZ, ADM1810-10ART, ADM1810-10ARTZ, ADM1810-5AKS Schematic [ru]
...
ADM1810-ADM1813/ADM1815-ADM1818
FEATURES
Reliable low cost voltage monitor with reset output
Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power
supply voltages
Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V,
2.31 V, and 2.18 V typical
Active high and low push-pull output choices: ADM1810,
ADM1812, ADM1815, and ADM1817
Open-drain output choices: ADM1811, ADM1813, ADM1816,
and ADM1818
Can be used with a manual push-button to generate a reset:
ADM1813, ADM1818
Initialization of microprocessor systems with added safety
Available in 3-lead SOT-23 and SC70 packages
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Automotive systems
GENERAL DESCRIPTION
The ADM181x range of voltage monitoring circuits is used in
any application where an electronic system needs to be reset
when a voltage increases above or below a predetermined value.
Because of the reset delay time incorporated into the ADM181x
series, these devices provide a safe startup for electronic systems.
Before a system initializes, the power supply must stabilize.
Using the ADM181x series ensures that there are typically 150 ms
for the power supply to stabilize before the system resets and
safe system initialization begins.
The ADM181x series of microprocessor reset circuits are
available in low cost, space-saving SOT-23 and SC70 packages.
Microprocessor Reset Circuits
FUNCTIONAL BLOCK DIAGRAMS
V
CC
TOLERANCE
GND
V
GND
V
GND
V
CC
CC
CC
REFERENCE
TOLERANCE
REFERENCE
TOLERANCE
REFERENCE
TOLERANCE
GND
REFERENCE
ADM1810/ADM1815
V
CC
BIAS
TC
ADM1811/ADM1816
V
CC
BIAS
TC
ADM1812/ADM1817
V
CC
BIAS
TC
ADM1813/ADM1818
V
CC
BIAS
TC
RESET
MONITOR
Figure 1.
150ms
DELAY
150ms
DELAY
150ms
DELAY
150ms
DELAY
5.5kΩ
5.5kΩ
RST
RST
RST
RST
00064-001
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Anal og Devices for its use, nor for any infringements of patents or ot her
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved.
ADM1810-ADM1813/ADM1815-ADM1818
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Perf or m an c e Charac t e r istics ..............................................6
Applications....................................................................................... 1
General Description......................................................................... 1
Functional Block Diagrams............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
ESD Caution.................................................................................. 4
Pin Configurations and Function Descriptions ........................... 5
REVISION HISTORY
10/05—Rev. C to Rev. D
Updated Format.................................................................. Universal
Added Figure 3...................................................................................5
Changes to Table 3.............................................................................5
Updated Outline Dimensions..........................................................8
Changes to Ordering Guide.............................................................9
9/03—REV. B to REV. C.
Added SC70......................................................................... Universal
Edits to SPECIFICATIONS..............................................................2
Edits to ORDERING GUIDE...........................................................4
Updated OUTLINE DIMENSIONS ...............................................7
2/03—REV. A to REV. B.
Edits to FEATURES...........................................................................1
Deleted Table I ...................................................................................1
Edits to SPECIFICATIONS..............................................................2
Theory of Operation ...........................................................................7
Timing Diagrams for All Devices ...............................................7
ADM1813 and ADM1818..............................................................7
ADM1810, ADM1812, ADM1815, and ADM1817.....................7
ADM1811 and ADM1816..............................................................7
Outline Dimensions ..........................................................................8
Ordering Guide .............................................................................9
Edits to ABSOLUTE MAXIMUM RATINGS...............................3
Edits to ORDERING GUIDE ..........................................................3
Added Typical Performance Characteristics .................................4
Edits to ADM1813 AND ADM1818 section.................................5
Edits to ADM1810, ADM1812, ADM1815, AND
ADM1817 section..............................................................................5
Edits to ADM1811 AND ADM1816 section.................................5
Updated OUTLINE DIMENSIONS ...............................................6
3/02—REV. 0 to REV. A.
Addition of Table .............................................................................. 1
Edits to ORDERING GUIDE ..........................................................3
Addition of new text to ADM1813 and ADM1818 section......... 4
Rev. D | Page 2 of 16
ADM1810-ADM1813/ADM1815-ADM1818
SPECIFICATIONS
VCC = full operating range, TA = −40°C to +105°C, unless otherwise noted.
Table 1.
Parameter Min Typ Max Unit Conditions/Note
SUPPLY
Voltage 1 5.5 V TA = 0°C to 105°C
1.2 5.5 V TA = −40°C to +105°C
Current 9 16 μA VCC = 5.5 V, VCC > VTH, no load
4 10 μA VCC = 3.6 V, VCC > VTH, no load
OUTPUT CURRENT
RST
Output Source Current
RST Output Source Current 350 μA VCC ≤ VTH (min), reset asserted (ADM1812/ADM1817)
RST
Output Sink Current
RST Output Sink Current 8 mA
OUTPUT VOLTAGE VCC − 0.5 VCC − 0.1 V
VCC TRIP POINT
ADM1810-5, ADM1811-5, ADM1812-5,
ADM1813-5
ADM1810-10, ADM1811-10, ADM1812-10,
ADM1813-10
ADM1815-5, ADM1816-5, ADM1817-5,
ADM1818-5
ADM1815-10, ADM1816-10,
ADM1817-10, ADM1818-10
ADM1815-20, ADM1816-20,
ADM1817-20, ADM1818-20
ADM1815-R23, ADM1816-R23,
ADM1817-R23, ADM1818-R23
ADM1815-R22, ADM1816-R22,
ADM1817-R22, ADM1818-R22
INTERNAL PULL-UP RESISTOR
ADM1811/ADM1816 3.5 5.5 7.5 kΩ
ADM1813/ADM1818 3.1 5.5 7.5 kΩ
OUTPUT CAPACITANCE 10 pF
RESET ACTIVE TIME 100 150 250 ms
VCC DETECT TO RESET
Falling 10 μs (ADM1810/ADM1811/ADM1812/ADM1813)
10 μs (ADM1815/ADM1816/ADM1817/ADM1818)
Rising 100 150 250 ms tR = 5 μs
PUSH-BUTTON DETECT TO
PUSH-BUTTON RESET 100 150 250 ms (ADM1813/ADM1818)
RST
350 μA VCC ≥ VTH (max), reset not asserted (ADM1810/ADM1815)
8 mA
4.50 4.62 4.75 V
4.25 4.35 4.49 V
2.98 3.06 3.15 V
2.80 2.88 2.97 V
2.47 2.55 2.64 V
2.25 2.31 2.37 V
2.12 2.18 2.25 V
1 μs (ADM1813/ADM1818)
≥ 2.7 V, reset asserted, V
V
CC
(ADM1810/ADM1811/ADM1813/
ADM1815/ADM1816/ADM1818)
≥ 2.7 V, reset not asserted,
V
CC
V
= 0.4 V (ADM1812/ADM1817)
OUT
(ADM1810/ADM1812/ADM1815/ADM1817)
@ 0 μA to 500 μA
= 0.4 V
OUT
Rev. D | Page 3 of 16
ADM1810-ADM1813/ADM1815-ADM1818
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter Rating
V
CC
Input Current 20 mA
Operating Temperature Range −40°C to +105°C
θ
Thermal Impedance, SOT-23
JA
θ
Thermal Impedance, SC70
JA
Lead Temperature (Soldering, 10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
Storage Temperature Range −65°C to +150°C
−0.3 V to +6.0 V
270°C/W
146°C/W
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum ratings for extended periods of time may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. D | Page 4 of 16
ADM1810-ADM1813/ADM1815-ADM1818
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
RST/RST
V
CC
1
ADM181x
TOP VIEW
(Not to Scale)
2
3
GND
00064-002
Figure 2. 3-Lead SOT Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
(SOT)
1 2
Pin No.
(SC70)
Mnemonic Function
RST/RST Reset Output. RST/RST remains active while VCC is below the reset threshold
and remains active for 150 ms typical after VCC rises above the reset threshold.
2 1 V
CC
Supply Voltage Being Monitored.
3 3 GND 0 V Ground Reference for All Signals.
V
1
CC
RST/RST
ADM181x
TOP VIEW
(Not to Scale)
2
3
GND
00064-014
Figure 3. 3-Lead SC70 Pin Configuration
Rev. D | Page 5 of 16
ADM1810-ADM1813/ADM1815-ADM1818
TYPICAL PERFORMANCE CHARACTERISTICS
10
1.011
ICC @VCC = 5.5V
ICC @VCC = 3V
TEMPERATURE (°C)
(μA)
CC
I
8
6
4
2
0
–40 12010085705030200–20
Figure 4. Supply Current vs. Temperature
900
800
700
600
POWER-DOWN RESET DELAY (μs)
500
400
300
200
100
0
–40 12010085705030200–20
VOD = 125mV
TEMPERATURE (°C)
VOD = 20mV
VOD = 200mV
Figure 5. Power-Down Reset Delay vs. Temperature
380
370
360
350
340
330
320
310
POWER-UP RESET TIMEOUT (ms)
300
290
–40 12010085705030200–20
TEMPERATURE (°C)
Figure 6. Power-Up Reset Timeout vs. Temperature
00064-003
00064-004
00064-005
1.009
1.007
1.005
1.003
1.001
0.999
NORMALIZED RESET THRESHOLD
0.997
0.995
–40 12010085705030200–20
DEVIATION (FALL)
DEVIATION (RISE)
TEMPERATURE (°C)
Figure 7. Normalized Reset Threshold vs. Temperature
60
50
s)
μ
40
30
20
MAXIMUM TRANSIENT (
10
0
10 100080060040020010080604030
VTH– VCC (mV)
Figure 8. Maximum Transient Duration Without Causing a Reset Pulse
vs. Reset Comparator Overdrive
00064-006
00064-007
Rev. D | Page 6 of 16
ADM1810-ADM1813/ADM1815-ADM1818
V
THEORY OF OPERATION
TIMING DIAGRAMS FOR ALL DEVICES
The following two timing diagrams are valid for ADM1810,
ADM1811, ADM1812, ADM1813, ADM1815, ADM1816,
ADM1817, and ADM1818.
V
CC
VCCTRIP POINT (MAX)
VCCTRIP POINT
V
TO RESET
CC
RST
DELAY
Figure 9. Power-Down Timing Diagram
VCCTRIP POINT (MAX)
TRIP POINT
V
TRIP POINT (MIN)
CC
V
CC
CC
RESET ACTIVE TIMEOUT
TRIP POINT (MIN)
V
CC
V
OL
VOLTAGE
INPUT LOW
The ADM1818 range has 2.88 V and 2.55 V (typical) trip-point
options that allow the user to monitor 3.3 V and 3 V supplies.
For 5 V monitoring requirements, the ADM1813 range has 4.62 V
and 4.35 V (typical) trip-point options.
00064-008
ADM1810, ADM1812, ADM1815, AND ADM1817
The ADM1812 is a 5 V supply monitor with an active high pushpull output and trip-point options of 4.62 V and 4.35 V typical.
The ADM1810 is similar to the ADM1812, except that the
ADM1810 has an active low push-pull output stage. The ADM1817
is suitable for monitoring 3.3 V, 3 V, and 2.5 V supplies, with an
active high push-pull output and trip-point options of 3.06 V,
2.88 V, 2.55 V, 2.31 V, and 2.18 V typical. The ADM1815 is similar
to the ADM1817, except that the ADM1815 has an active low
push-pull output stage.
PUSH-BUTTON TIME
RESET TIMEOUT
Figure 12. Push-Button Reset Timing Diagram
VOLTAGE
INPUT HIGH
00064-011
RST
00064-009
Figure 10. Power-Up Timing Diagram
ADM1813 AND ADM1818
The ADM1813 and ADM1818 are low cost voltage monitoring
devices featuring an open-drain output and optional push-button
reset function.
An optional push-button reset switch can be connected between
RST
and ground. Pressing this switch pulls the reset output low. If
the push-button reset button pulls the
greater than 1 μs when the reset button releases the
float high, then the
V
CC
ADM1813/
ADM1818
V
CC
RST
GND
MICRO-
PROCESSOR
RESET
00064-010
Figure 11. ADM1813/ADM1818 Typical Application
RST
output low for a period
RST
RST
line stays low for another 150 ms typical.
line to
The ADM1810/ADM1812/ADM1815/ADM1817 can be
connected directly to most microprocessor reset inputs without
the need for external components.
V
CC
ADM1810/
ADM1812/
ADM1815/
ADM1817
V
CC
RST/RST
GND
Figure 13. ADM1810/ADM1812/ADM1815/ADM1817 Typical Application
PROCESSOR
RESET
MICRO-
00064-012
ADM1811 AND ADM1816
The ADM1811 is a 5 V supply monitor with an active low opendrain output and trip-point options of 4.62 V and 4.35 V typical.
The ADM1816 also has an active low open-drain output but is
suitable for monitoring lower voltage supplies of 3.3 V, 3 V,
and 2.5 V.
V
CC
ADM1811/
ADM1816
V
CC
RST
GND
MICRO-
PROCESSOR
RESET
00064-013
Figure 14. ADM1811/ADM1816 Typical Application
Rev. D | Page 7 of 16
ADM1810-ADM1813/ADM1815-ADM1818
OUTLINE DIMENSIONS
3.04
2.90
1.40
1.30
1.20
PIN 1
0.10
0.01
Figure 15. 3-Lead Small Outline Transistor Package [SOT-23]
2.80
3
1
1.90 BSC
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS TO-236AB
2
0.95 BSC
2.64
2.10
0.50
0.30
1.12
0.89
0.60
0.50
0.40
(RT-3)
Dimensions shown in millimeters
0.20
0.08
2.20
2.00
1.35
1.25
1.15
PIN 1
1.00
0.80
0.10 MAX
0.10 COPLANARITY
1.80
2
0.65 BSC
2.40
2.10
1.80
1.10
0.80
SEATING
PLANE
0.26
0.10
0.40
0.10
3
0.40
0.25
ALL DIMENSIONS COMPLIANT WITH EIAJ SC70
0.30
0.20
0.10
Figure 16. 3-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-3)
Dimensions shown in millimeters
Rev. D | Page 8 of 16
ADM1810-ADM1813/ADM1815-ADM1818
ORDERING GUIDE
1
Model
ADM1810-5AKS-REEL 4.62 V KS-3 (SC70) MZV
ADM1810-5AKS-REEL7 4.62 V KS-3 (SC70) MZV
ADM1810-5AKSZ-REEL
ADM1810-5AKSZ-RL7
2
2
ADM1810-5ART-REEL 4.62 V RT-3 (SOT-23) MZV
ADM1810-5ART-REEL7 4.62 V RT-3 (SOT-23) MZV
ADM1810-5ARTZ-REEL
ADM1810-5ARTZ-RL7
2
2
ADM1810-10AKS-REEL 4.35 V KS-3 (SC70) MZT
ADM1810-10AKS-REEL7 4.35 V KS-3 (SC70) MZT
ADM1810-10AKSZ-RL
ADM1810-10AKSZ-RL7
2
2
ADM1810-10ART-REEL 4.35 V RT-3 (SOT-23) MZT
ADM1810-10ART-REEL7 4.35 V RT-3 (SOT-23) MZT
ADM1810-10ARTZ-RL
ADM1810-10ARTZ-RL7
2
2
ADM1811-5AKS-REEL 4.62 V KS-3 (SC70) M1V
ADM1811-5AKS-RL7 4.62 V KS-3 (SC70) M1V
ADM1811-5AKSZ-REEL
ADM1811-5AKSZ-RL7
2
2
ADM1811-5ART-REEL 4.62 V RT-3 (SOT-23) M1V
ADM1811-5ART-REEL7 4.62 V RT-3 (SOT-23) M1V
ADM1811-5ARTZ-REEL
ADM1811-5ARTZ-RL7
2
2
ADM1811-10AKS-REEL 4.35 V KS-3 (SC70) M1T
ADM1811-10AKS-RL7 4.35 V KS-3 (SC70) M1T
ADM1811-10AKSZ-RL
ADM1811-10AKSZ-RL7
2
2
ADM1811-10ART-REEL 4.35 V RT-3 (SOT-23) M1T
ADM1811-10ART-RL7 4.35 V RT-3 (SOT-23) M1T
ADM1811-10ARTZ-RL
ADM1811-10ARTZ-RL7
2
2
ADM1812-5AKS-REEL 4.62 V KS-3 (SC70) MTV
ADM1812-5AKS-RL7 4.62 V KS-3 (SC70) MTV
ADM1812-5AKSZ-REEL
ADM1812-5AKSZ-RL7
2
2
ADM1812-5ART-REEL 4.62 V RT-3 (SOT-23) MTV
ADM1812-5ART-REEL7 4.62 V RT-3 (SOT-23) MTV
ADM1812-5ARTZ-REEL
ADM1812-5ARTZ-RL7
2
2
ADM1812-10AKS-REEL 4.35 V KS-3 (SC70) MTT
ADM1812-10AKS-RL7 4.35 V KS-3 (SC70) MTT
ADM1812-10AKSZ-RL
ADM1812-10AKSZ-RL7
2
2
ADM1812-10ART-REEL 4.35 V RT-3 (SOT-23) MTT
ADM1812-10ART-RL7 4.35 V RT-3 (SOT-23) MTT
ADM1812-10ARTZ-RL
ADM1812-10ARTZ-RL7
2
2
Trip Point Package Option Brand
4.62 V KS-3 (SC70) M4Y
4.62 V KS-3 (SC70) M4Y
4.62 V RT-3 (SOT-23) M4Y
4.62 V RT-3 (SOT-23) M4Y
4.35 V KS-3 (SC70) M4Z
4.35 V KS-3 (SC70) M4Z
4.35 V RT-3 (SOT-23) M4Z
4.35 V RT-3 (SOT-23) M4Z
4.62 V KS-3 (SC70) M6Z
4.62 V KS-3 (SC70) M6Z
4.62 V RT-3 (SOT-23) M6Z
4.62 V RT-3 (SOT-23) M6Z
4.35 V KS-3 (SC70) M70
4.35 V KS-3 (SC70) M70
4.35 V RT-3 (SOT-23) M70
4.35 V RT-3 (SOT-23) M70
4.62 V KS-3 (SC70) M72
4.62 V KS-3 (SC70) M72
4.62 V RT-3 (SOT-23) M72
4.62 V RT-3 (SOT-23) M72
4.35 V KS-3 (SC70) M71
4.35 V KS-3 (SC70) M71
4.35 V RT-3 (SOT-23) M71
4.35 V RT-3 (SOT-23) M71
Rev. D | Page 9 of 16
ADM1810-ADM1813/ADM1815-ADM1818
1
Model
ADM1813-5AKS-REEL 4.62 V KS-3 (SC70) M3V
ADM1813-5AKS-RL7 4.62 V KS-3 (SC70) M3V
ADM1813-5AKSZ-REEL
ADM1813-5AKSZ-RL7
2
2
ADM1813-5ART-RL 4.62 V RT-3 (SOT-23) M3V
ADM1813-5ART-RL7 4.62 V RT-3 (SOT-23) M3V
ADM1813-5ARTZ-RL
ADM1813-5ARTZ-RL7
2
2
ADM1813-10AKS-REEL 4.35 V KS-3 (SC70) M3T
ADM1813-10AKS-RL7 4.35 V KS-3 (SC70) M3T
ADM1813-10AKSZ-RL
ADM1813-10AKSZ-RL7
2
2
ADM1813-10ART-REEL 4.35 V RT-3 (SOT-23) M3T
ADM1813-10ART-RL7 4.35 V RT-3 (SOT-23) M3T
ADM1813-10ARTZ-RL
ADM1813-10ARTZ-RL7
2
2
ADM1815-5AKS-REEL 3.06 V KS-3 (SC70) M5K
ADM1815-5AKS-RL7 3.06 V KS-3 (SC70) M5K
ADM1815-5AKSZ-REEL
ADM1815-5AKSZ-RL7
2
2
ADM1815-5ART-REEL 3.06 V RT-3 (SOT-23) M5K
ADM1815-5ART-REEL7 3.06 V RT-3 (SOT-23) M5K
ADM1815-5ARTZ-REEL
ADM1815-5ARTZ-RL7
2
2
ADM1815-10AKS-REEL 2.88 V KS-3 (SC70) M5E
ADM1815-10AKS-RL7 2.88 V KS-3 (SC70) M5E
ADM1815-10AKSZ-RL
ADM1815-10AKSZ-RL7
2
2
ADM1815-10ART-REEL 2.88 V RT-3 (SOT-23) M5E
ADM1815-10ART-RL7 2.88 V RT-3 (SOT-23) M5E
ADM1815-10ARTZ-RL
ADM1815-10ARTZ-RL7
2
2
ADM1815-20AKS-REEL 2.55 V KS-3 (SC70) M5A
ADM1815-20AKS-RL7 2.55 V KS-3 (SC70) M5A
ADM1815-20AKSZ-RL
ADM1815-20AKSZ-RL7
2
2
ADM1815-20ART-RL 2.55 V RT-3 (SOT-23) M5A
ADM1815-20ART-RL7 2.55 V RT-3 (SOT-23) M5A
ADM1815-20ARTZ-RL
ADM1815-20ARTZ-RL7
2
2
ADM1815-R22AKS-RL 2.18 V KS-3 (SC70) M5B
ADM1815-R22AKS-RL7 2.18 V KS-3 (SC70) M5B
ADM1815-R22AKSZ-RL
ADM1815-R22AKSZ-R7
2
2
ADM1815-R22ART-RL 2.18 V RT-3 (SOT-23) M5B
ADM1815-R22ART-RL7 2.18 V RT-3 (SOT-23) M5B
ADM1815-R22ARTZ-RL
ADM1815-R22ARTZ-R7
2
2
ADM1815-R23AKS-RL 2.31 V KS-3 (SC70) M5C
ADM1815-R23AKS-RL7 2.31 V KS-3 (SC70) M5C
ADM1815-R23AKSZ-RL
ADM1815-R23AKSZ-R7
2
2
Trip Point Package Option Brand
4.62 V KS-3 (SC70) M6X
4.62 V KS-3 (SC70) M6X
4.62 V RT-3 (SOT-23) M6X
4.62 V RT-3 (SOT-23) M6X
4.35 V KS-3 (SC70) M6Y
4.35 V KS-3 (SC70) M6Y
4.35 V RT-3 (SOT-23) M6Y
4.35 V RT-3 (SOT-23) M6Y
3.06 V KS-3 (SC70) M73
3.06 V KS-3 (SC70) M73
3.06 V RT-3 (SOT-23) M73
3.06 V RT-3 (SOT-23) M73
2.88 V KS-3 (SC70) M4F
2.88 V KS-3 (SC70) M4F
2.88 V RT-3 (SOT-23) M4F
2.88 V RT-3 (SOT-23) M4F
2.55 V KS-3 (SC70) M76
2.55 V KS-3 (SC70) M76
2.55 V RT-3 (SOT-23) M76
2.55 V RT-3 (SOT-23) M76
2.18 V KS-3 (SC70) M74
2.18 V KS-3 (SC70) M74
2.18 V RT-3 (SOT-23) M74
2.18 V RT-3 (SOT-23) M74
2.31 V KS-3 (SC70) M75
2.31 V KS-3 (SC70) M75
Rev. D | Page 10 of 16
ADM1810-ADM1813/ADM1815-ADM1818
1
Model
ADM1815-R23ART-RL 2.31 V RT-3 (SOT-23) M5C
ADM1815-R23ART-RL7 2.31 V RT-3 (SOT-23) M5C
ADM1815-R23ARTZ-RL
ADM1815-R23ARTZ-R7
2
2
ADM1816-5AKS-REEL 3.06 V KS-3 (SC70) M6K
ADM1816-5AKS-REEL7 3.06 V KS-3 (SC70) M6K
ADM1816-5AKSZ-REEL
ADM1816-5AKSZ-RL7
2
2
ADM1816-5ART-REEL 3.06 V RT-3 (SOT-23) M6K
ADM1816-5ART-REEL7 3.06 V RT-3 (SOT-23) M6K
ADM1816-5ARTZ-REEL
ADM1816-5ARTZ-RL7
2
2
ADM1816-10AKS-REEL 2.88 V KS-3 (SC70) M6E
ADM1816-10AKS-RL7 2.88 V KS-3 (SC70) M6E
ADM1816-10AKSZ-RL
ADM1816-10AKSZ-RL7
2
2
ADM1816-10ART-REEL 2.88 V RT-3 (SOT-23) M6E
ADM1816-10ART-RL7 2.88 V RT-3 (SOT-23) M6E
ADM1816-10ARTZ-RL
ADM1816-10ARTZ-RL7
2
2
ADM1816-20AKS-REEL 2.55 V KS-3 (SC70) M6A
ADM1816-20AKS-RL7 2.55 V KS-3 (SC70) M6A
ADM1816-20AKSZ-RL
ADM1816-20AKSZ-RL7
2
2
ADM1816-20ART-REEL 2.55 V RT-3 (SOT-23) M6A
ADM1816-20ART-RL7 2.55 V RT-3 (SOT-23) M6A
ADM1816-20ARTZ-RL
ADM1816-20ARTZ-RL7
2
2
ADM1816-R22AKS-RL 2.18 V KS-3 (SC70) M6B
ADM1816-R22AKS-RL7 2.18 V KS-3 (SC70) M6B
ADM1816-R22AKSZ-RL
ADM1816-R22AKSZ-R7
2
2
ADM1816-R22ART-RL 2.18 V RT-3 (SOT-23) M6B
ADM1816-R22ART-RL7 2.18 V RT-3 (SOT-23) M6B
ADM1816-R22ARTZ-RL
ADM1816-R22ARTZ-R7
2
2
ADM1816-R23AKS-RL 2.31 V KS-3 (SC70) M6C
ADM1816-R23AKS-RL7 2.31 V KS-3 (SC70) M6C
ADM1816-R23AKSZ-RL
ADM1816-R23AKSZ-R7
2
2
ADM1816-R23ART-RL 2.31 V RT-3 (SOT-23) M6C
ADM1816-R23ART-RL7 2.31 V RT-3 (SOT-23) M6C
ADM1816-R23ARTZ-RL
ADM1816-R23ARTZ-R7
2
2
ADM1817-5AKS-REEL 3.06 V KS-3 (SC70) M7K
ADM1817-5AKS-REEL7 3.06 V KS-3 (SC70) M7K
ADM1817-5AKSZ-REEL
ADM1817-5AKSZ-RL7
2
2
ADM1817-5ART-REEL 3.06 V RT-3 (SOT-23) M7K
ADM1817-5ART-REEL7 3.06 V RT-3 (SOT-23) M7K
ADM1817-5ARTZ-REEL
ADM1817-5ARTZ-RL7
2
2
Trip Point Package Option Brand
2.31 V RT-3 (SOT-23) M75
2.31 V RT-3 (SOT-23) M75
3.06 V KS-3 (SC70) M77
3.06 V KS-3 (SC70) M77
3.06 V RT-3 (SOT-23) M77
3.06 V RT-3 (SOT-23) M77
2.88 V KS-3 (SC70) M54
2.88 V KS-3 (SC70) M54
2.88 V RT-3 (SOT-23) M54
2.88 V RT-3 (SOT-23) M54
2.55 V KS-3 (SC70) M6H
2.55 V KS-3 (SC70) M6H
2.55 V RT-3 (SOT-23) M6H
2.55 V RT-3 (SOT-23) M6H
2.18 V KS-3 (SC70) M78
2.18 V KS-3 (SC70) M78
2.18 V RT-3 (SOT-23) M78
2.18 V RT-3 (SOT-23) M78
2.31 V KS-3 (SC70) M79
2.31 V KS-3 (SC70) M79
2.31 V RT-3 (SOT-23) M79
2.31 V RT-3 (SOT-23) M79
3.06 V KS-3 (SC70) M7F
3.06 V KS-3 (SC70) M7F
3.06 V RT-3 (SOT-23) M7F
3.06 V RT-3 (SOT-23) M7F
Rev. D | Page 11 of 16
ADM1810-ADM1813/ADM1815-ADM1818
1
Model
ADM1817-10AKS-REEL 2.88 V KS-3 (SC70) M7E
ADM1817-10AKS-RL7 2.88 V KS-3 (SC70) M7E
ADM1817-10AKSZ-RL
ADM1817-10AKSZ-RL7
2
2
ADM1817-10ART-REEL 2.88 V RT-3 (SOT-23) M7E
ADM1817-10ART-R7 2.88 V RT-3 (SOT-23) M7E
ADM1817-10ARTZ-RL
ADM1817-10ARTZ-RL7
2
2
ADM1817-20AKS-REEL 2.55 V KS-3 (SC70) M7A
ADM1817-20AKS-RL7 2.55 V KS-3 (SC70) M7A
ADM1817-20AKSZ-RL
ADM1817-20AKSZ-RL7
2
2
ADM1817-20ART-REEL 2.55 V RT-3 (SOT-23) M7A
ADM1817-20ART-RL7 2.55 V RT-3 (SOT-23) M7A
ADM1817-20ARTZ-RL
ADM1817-20ARTZ-RL7
2
2
ADM1817-R22AKS-RL 2.18 V KS-3 (SC70) M7B
ADM1817-R22AKS-RL7 2.18 V KS-3 (SC70) M7B
ADM1817-R22AKSZ-RL
ADM1817-R22AKSZ-R7
2
2
ADM1817-R22ART-RL 2.18 V RT-3 (SOT-23) M7B
ADM1817-R22ART-RL7 2.18 V RT-3 (SOT-23) M7B
ADM1817-R22ARTZ-RL
ADM1817-R22ARTZ-R7
2
2
ADM1817-R23AKS-RL 2.31 V KS-3 (SC70) M7C
ADM1817-R23AKS-RL7 2.31 V KS-3 (SC70) M7C
ADM1817-R23AKSZ-RL
ADM1817-R23AKSZ-R7
2
2
ADM1817-R23ART-RL 2.31 V RT-3 (SOT-23) M7C
ADM1817-R23ART-RL7 2.31 V RT-3 (SOT-23) M7C
ADM1817-R23ARTZ-RL
ADM1817-R23ARTZ-R7
2
2
ADM1818-5AKS-REEL 3.06 V KS-3 (SC70) M8K
ADM1818-5AKS-REEL7 3.06 V KS-3 (SC70) M8K
ADM1818-5AKSZ-REEL
ADM1818-5AKSZ-RL7
2
2
ADM1818-5ART-REEL 3.06 V RT-3 (SOT-23) M8K
ADM1818-5ART-REEL7 3.06 V RT-3 (SOT-23) M8K
ADM1818-5ARTZ-REEL
ADM1818-5ARTZ-RL7
2
2
ADM1818-10AKS-REEL 2.88 V KS-3 (SC70) M8E
ADM1818-10AKS-RL7 2.88 V KS-3 (SC70) M8E
ADM1818-10AKSZ-RL
ADM1818-10AKSZ-RL7
2
2
ADM1818-10ART-REEL 2.88 V RT-3 (SOT-23) M8E
ADM1818-10ART-RL7 2.88 V RT-3 (SOT-23) M8E
ADM1818-10ARTZ-RL7
2
ADM1818-20AKS-REEL 2.55 V KS-3 (SC70) M8A
ADM1818-20AKS-RL7 2.55 V KS-3 (SC70) M8A
ADM1818-20AKSZ-RL
ADM1818-20AKSZ-RL7
2
2
ADM1818-20ART-REEL 2.55 V RT-3 (SOT-23) M8A
Trip Point Package Option Brand
2.88 V KS-3 (SC70) M7G
2.88 V KS-3 (SC70) M7G
2.88 V RT-3 (SOT-23) M7G
2.88 V RT-3 (SOT-23) M7G
2.55 V KS-3 (SC70) M7H
2.55 V KS-3 (SC70) M7H
2.55 V RT-3 (SOT-23) M7H
2.55 V RT-3 (SOT-23) M7H
2.18 V KS-3 (SC70) M7J
2.18 V KS-3 (SC70) M7J
2.18 V RT-3 (SOT-23) M7J
2.18 V RT-3 (SOT-23) M7J
2.31 V KS-3 (SC70) M7L
2.31 V KS-3 (SC70) M7L
2.31 V RT-3 (SOT-23) M7L
2.31 V RT-3 (SOT-23) M7L
3.06 V KS-3 (SC70) M4T
3.06 V KS-3 (SC70) M4T
3.06 V RT-3 (SOT-23) M4T
3.06 V RT-3 (SOT-23) M4T
2.88 V KS-3 (SC70) M7P
2.88 V KS-3 (SC70) M7P
2.88 V RT-3 (SOT-23) M7P
2.55 V KS-3 (SC70) M59
2.55 V KS-3 (SC70) M59
Rev. D | Page 12 of 16
ADM1810-ADM1813/ADM1815-ADM1818
1
Model
ADM1818-20ART-RL7 2.55 V RT-3 (SOT-23) M8A
ADM1818-20ARTZ-RL
ADM1818-20ARTZ-RL7
2
2
ADM1818-R22AKS-RL 2.18 V KS-3 (SC70) M8B
ADM1818-R22AKS-RL7 2.18 V KS-3 (SC70) M8B
ADM1818-R22AKSZ-RL
ADM1818-R22AKSZ-R7
2
2
ADM1818-R22ART-RL 2.18 V RT-3 (SOT-23) M8B
ADM1818-R22ART-RL7 2.18 V RT-3 (SOT-23) M8B
ADM1818-R23AKS-RL 2.31 V KS-3 (SC70) M8C
ADM1818-R23AKS-RL7 2.31 V KS-3 (SC70) M8C
ADM1818-R23AKSZ-RL
ADM1818-R23AKSZ-R7
2
2
ADM1818-R23ART-RL 2.31 V RT-3 (SOT-23) M8C
ADM1818-R23ART-RL7 2.31 V RT-3 (SOT-23) M8C
1
Available only in reels.
2
Z = Pb-free part.
Trip Point Package Option Brand
2.55 V RT-3 (SOT-23) M59
2.55 V RT-3 (SOT-23) M59
2.18 V KS-3 (SC70) M7M
2.18 V KS-3 (SC70) M7M
2.31 V KS-3 (SC70) M7N
2.31 V KS-3 (SC70) M7N
Rev. D | Page 13 of 16
ADM1810-ADM1813/ADM1815-ADM1818
NOTES
Rev. D | Page 14 of 16
ADM1810-ADM1813/ADM1815-ADM1818
NOTES
Rev. D | Page 15 of 16
ADM1810-ADM1813/ADM1815-ADM1818
NOTES
© 2005 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00064-0-10/05(D)
Rev. D | Page 16 of 16
Loading...