ANALOG DEVICES ADL5535 Service Manual
20 MHz to 1.0 GHz IF Gain Block
FEATURES
Fixed gain of 16 dB
Operation from 20 MHz to 1.0 GHz
Input and output internally matched to 50 Ω
Integrated bias control circuit
OIP3
45.5 dBm at 190 MHz
45.5 dBm at 380 MHz
Noise figure
3.2 dB at 190 MHz
3.3 dB at 380 MHz
P1dB of 18.9 dBm at 190 MHz
Single 5 V power supply
Low quiescent current of 97 mA
MSL-1 rated SOT-89 package
ESD rating of ±2 kV (Class 2)
Pin-compatible with the 20 dB gain
GENERAL DESCRIPTION
The ADL5535 is a 16 dB linear amplifier that operates at
frequencies up to 1 GHz. The device can be used in a wide
variety of cellular, CATV, military, and instrumentation
equipment.
The ADL5535 provides the highest dynamic range available
from an internally matched IF gain block. This is accomplished
by providing extremely low noise figures and very high OIP3
specifications simultaneously across the entire 1 GHz frequency
range. The ADL5535 also provides extremely flat gain and P1dB
over frequency, which are stable over temperature, power supply,
and from device to device.
The device is internally matched to 50 at the input and output,
making the ADL5535 very easy to implement in a wide variety
of applications. Only input/output ac coupling capacitors, power
supply decoupling capacitors, and an external inductor are
required for operation.
ADL5536
ADL5535
FUNCTIONAL BLOCK DIAGRAM
GND
(2)
ADL5535
BIAS
1 2
RFIN GND RFOUT
Figure 1.
The ADL5535 is fabricated on a GaAs HBT process and has an
ESD rating of ±2 kV (Class 2). The device is assembled in an
MSL-1 rated SOT-89 package that uses an exposed paddle for
excellent thermal impedance.
The ADL5535 consumes only 97 mA on a single 5 V supply and
is fully specified for operation from −40°C to +85°C.
The ADL5535 is also pin-compatible with the 20 dB gain
ADL5536. Fully populated evaluation boards are available
for each amplifier.
3
08674-001
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2010 Analog Devices, Inc. All rights reserved.
ADL5535
TABLE OF CONTENTS
Features .............................................................................................. 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Typical Scattering Parameters (S-Parameters) ......................... 5
Absolute Maximum Ratings ............................................................ 6
ESD Caution .................................................................................. 6
Pin Configuration and Function Descriptions ............................. 7
Typical Performance Characteristics ............................................. 8
REVISION HISTORY
4/10—Revision 0: Initial Version
Basic Connections .......................................................................... 10
Soldering Information and Recommended PCB
Land Pattern ................................................................................ 10
ACPR Performance ........................................................................ 11
Error Vector Magnitude (EVM) Performance ........................... 11
ADC Driving Application ............................................................. 12
Evaluation Board ............................................................................ 13
Outline Dimensions ....................................................................... 14
Ordering Guide .......................................................................... 14
Rev. 0 | Page 2 of 16
ADL5535
SPECIFICATIONS
VCC = 5 V and TA = 25°C, unless otherwise noted.
Table 1.
Parameter Test Conditions/Comments Min Typ Max Unit
OVERALL FUNCTION
Frequency Range 20 1000 MHz
FREQUENCY = 20 MHz
Gain 16.7 dB
Output 1 dB Compression Point (P1dB) 17.7 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −59.5 dBc
OUT
= 0 dBm −93 dBc
OUT
Noise Figure 3.0 dB
FREQUENCY = 70 MHz
Gain 16.5 dB
vs. Frequency ±50 MHz ±0.33 dB
vs. Temperature −40°C ≤ TA ≤ +85°C ±0.16 dB
vs. Supply Voltage 4.75 V to 5.25 V ±0.04 dB
Output 1 dB Compression Point (P1dB) 18.9 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −64 dBc
OUT
= 0 dBm −93 dBc
OUT
Noise Figure 3.0 dB
FREQUENCY = 190 MHz
Gain 15.2 16.1 17.0 dB
vs. Frequency ±50 MHz ±0.06 dB
vs. Temperature −40°C ≤ TA ≤ +85°C ±0.17 dB
vs. Supply Voltage 4.75 V to 5.25 V ±0.04 dB
Output 1 dB Compression Point (P1dB) 17.8 18.9 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −60.2 dBc
OUT
= 0 dBm −84.3 dBc
OUT
Noise Figure 3.2 dB
FREQUENCY = 380 MHz
Gain 15.0 15.8 16.5 dB
vs. Frequency ±50 MHz ±0.08 dB
vs. Temperature −40°C ≤ TA ≤ +85°C ±0.17 dB
vs. Supply Voltage 4.75 V to 5.25 V ±0.05 dB
Output 1 dB Compression Point (P1dB) 17.8 18.9 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −61.9 dBc
OUT
= 0 dBm −75 dBc
OUT
Noise Figure 3.3 dB
FREQUENCY = 748 MHz
Gain 15.2 dB
vs. Frequency ±50 MHz ±0.10 dB
vs. Temperature −40°C ≤ TA ≤ +85°C ±0.20 dB
vs. Supply Voltage 4.75 V to 5.25 V ±0.06 dB
Output 1 dB Compression Point (P1dB) 18.9 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −52.6 dBc
OUT
= 0 dBm −68 dBc
OUT
Noise Figure 3.2 dB
Rev. 0 | Page 3 of 16
) = 3 dBm per tone 41.5 dBm
OUT
) = 3 dBm per tone 43.5 dBm
OUT
) = 3 dBm per tone 45.5 dBm
OUT
) = 3 dBm per tone 45.5 dBm
OUT
) = 3 dBm per tone 42.0 dBm
OUT
ADL5535
Parameter Test Conditions/Comments Min Typ Max Unit
FREQUENCY = 900 MHz
Gain 15.1 dB
vs. Frequency ±50 MHz ±0.11 dB
vs. Temperature −40°C ≤ TA ≤ +85°C ±0.20 dB
vs. Supply Voltage 4.75 V to 5.25 V ±0.06 dB
Output 1 dB Compression Point (P1dB) 19.0 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −59.3 dBc
OUT
= 0 dBm −64.6 dBc
OUT
Noise Figure 3.2 dB
FREQUENCY = 1000 MHz
Gain 14.9 dB
vs. Frequency ±50 MHz ±0.11 dB
vs. Temperature −40°C ≤ TA ≤ +85°C ±0.21 dB
vs. Supply Voltage 4.75 V to 5.25 V ±0.07 dB
Output 1 dB Compression Point (P1dB) 18.9 dBm
Output Third-Order Intercept (OIP3) ∆f = 1 MHz, output power (P
Second Harmonic P
Third Harmonic P
= 0 dBm −51.4 dBc
OUT
= 0 dBm −63.1 dBc
OUT
Noise Figure 3.3 dB
POWER INTERFACE
Supply Voltage (VCC) 4.5 5.0 5.5 V
Supply Current 97 115 mA
vs. Temperature −40°C ≤ TA ≤ +85°C ±2.0 mA
Power Dissipation VCC = 5 V 0.5 W
) = 3 dBm per tone 40.0 dBm
OUT
) = 3 dBm per tone 39.5 dBm
OUT
Rev. 0 | Page 4 of 16
ADL5535
TYPICAL SCATTERING PARAMETERS (S-PARAMETERS)
VCC = 5 V, TA = 25°C, and the effects of the test fixture have been de-embedded up to the pins of the device.
Table 2.
Frequency
(MHz)
20 −13.03 −112.72 17.11 167.18 −19.70 +10.45 −14.78 −125.49
70 −18.32 −152.93 16.33 171.17 −19.67 +0.77 −15.85 −161.12
120 −19.04 −161.05 16.22 169.68 −19.66 −1.99 −15.99 −166.87
190 −19.31 −163.81 16.16 166.09 −19.65 −4.89 −15.97 −168.23
240 −19.35 −163.54 16.10 163.36 −19.65 −6.74 −15.91 −167.75
290 −19.26 −162.62 16.08 160.44 −19.65 −8.54 −15.81 −166.89
340 −19.24 −161.59 16.01 157.37 −19.66 −10.20 −15.70 −166.07
390 −19.12 −158.71 15.94 154.60 −19.65 −11.99 −15.53 −164.46
440 −18.88 −157.70 15.91 151.65 −19.65 −13.65 −15.28 −163.07
490 −18.58 −157.00 15.84 148.72 −19.69 −15.34 −15.02 −162.82
540 −18.35 −156.08 15.80 145.67 −19.71 −16.97 −14.80 −162.40
590 −18.12 −154.28 15.71 142.80 −19.70 −18.60 −14.58 −161.54
640 −17.82 −153.50 15.67 139.94 −19.71 −20.26 −14.31 −161.17
690 −17.57 −152.78 15.59 136.89 −19.73 −21.87 −14.07 −160.95
740 −17.30 −151.90 15.51 134.11 −19.74 −23.49 −13.82 −160.76
790 −17.04 −151.31 15.44 131.17 −19.75 −25.11 −13.58 −160.71
840 −16.76 −150.77 15.35 128.31 −19.77 −26.74 −13.34 −160.76
900 −16.41 −150.20 15.26 125.01 −19.79 −28.65 −13.05 −160.99
950 −16.15 −149.94 15.17 122.08 −19.80 −30.29 −12.82 −161.31
1000 −15.87 −149.69 15.08 119.42 −19.82 −31.88 −12.59 −161.67
1050 −15.60 −149.72 15.00 116.58 −19.84 −33.51 −12.38 −162.13
1100 −15.35 −149.61 14.89 113.89 −19.86 −35.10 −12.17 −162.71
1150 −15.08 −149.74 14.81 111.22 −19.88 −36.69 −11.97 −163.25
1200 −14.86 −149.84 14.70 108.43 −19.90 −38.29 −11.79 −163.86
1250 −14.58 −149.97 14.61 105.97 −19.92 −39.90 −11.59 −164.52
1300 −14.35 −150.33 14.52 103.20 −19.94 −41.52 −11.41 −165.22
1350 −14.11 −150.67 14.41 100.66 −19.96 −43.13 −11.25 −166.05
1400 −13.90 −151.10 14.32 98.10 −19.99 −44.68 −11.08 −166.79
1450 −13.69 −151.43 14.21 95.51 −20.02 −46.23 −10.93 −167.47
1500 −13.46 −151.86 14.11 93.03 −20.04 −47.82 −10.78 −168.33
1550 −13.26 −152.41 14.02 90.50 −20.06 −49.37 −10.63 −169.12
Magnitude (dB) Angle (°) Magnitude (dB) Angle (°) Magnitude (dB) Angle (°) Magnitude (dB) Angle (°)
S11 S21 S12 S22
Rev. 0 | Page 5 of 16
Loading...