Analog Devices ADG413BR, ADG413BN, ADG412TQ, ADG412BR, ADG412BN Datasheet
...
LC2MOS
a
FEATURES
44 V Supply Maximum Ratings
615 V Analog Signal Range
Low On Resistance (<35 V)
Ultralow Power Dissipation (35 mW)
Fast Switching Times
t
<175 ns
ON
t
<145 ns
OFF
TTL/CMOS Compatible
Plug-In Replacement for DG411/DG412/DG413
APPLICATIONS
Audio and Video Switching
Automatic Test Equipment
Precision Data Acquisition
Battery Powered Systems
Sample Hold Systems
Communication Systems
GENERAL DESCRIPTION
The ADG411, ADG412 and ADG413 are monolithic CMOS
devices comprising four independently selectable switches. They
are designed on an enhanced LC
low power dissipation yet gives high switching speed and low on
resistance.
The on resistance profile is very flat over the full analog input
range ensuring excellent linearity and low distortion when
switching audio signals. Fast switching speed coupled with high
signal bandwidth also make the parts suitable for video signal
switching. CMOS construction ensures ultralow power dissipation making the parts ideally suited for portable and battery
powered instruments.
The ADG411, ADG412 and ADG413 contain four independent SPST switches. The ADG411 and ADG412 differ only in
that the digital control logic is inverted. The ADG411 switches
are turned on with a logic low on the appropriate control input,
while a logic high is required for the ADG412. The ADG413
has two switches with digital control logic similar to that of the
ADG411 while the logic is inverted on the other two switches.
Each switch conducts equally well in both directions when ON
and each has an input signal range that extends to the supplies.
In the OFF condition, signal levels up to the supplies are
blocked. All switches exhibit break-before-make switching action for use in multiplexer applications. Inherent in the design is
low charge injection for minimum transients when switching the
digital inputs.
2
MOS process which provides
Precision Quad SPST Switches
ADG411/ADG412/ADG413
FUNCTIONAL BLOCK DIAGRAMS
IN1
IN2
IN3
IN4
S1
D1
S2
D2
S3
D3
S4
D4
ADG413
IN1
IN2
ADG412
IN3
IN4
S1
D1
S2
D2
S3
D3
S4
D4
IN1
IN2
ADG411
IN3
IN4
SWITCHES SHOWN FOR A LOGIC "1" INPUT
PRODUCT HIGHLIGHTS
1. Extended Signal Range
The ADG411, ADG412 and ADG413 are fabricated on an
enhanced LC
2
MOS, giving an increased signal range which
extends fully to the supply rails.
2. Ultralow Power Dissipation
3. Low R
ON
4. Break-Before-Make Switching
This prevents channel shorting when the switches are
configured as a multiplexer.
5. Single Supply Operation
For applications where the analog signal is unipolar, the
ADG411, ADG412 and ADG413 can be operated from a
single rail power supply. The parts are fully specified with a
single +12 V power supply and will remain functional with
single supplies as low as +5 V.
S1
D1
S2
D2
S3
D3
S4
D4
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700 World Wide Web Site: http://www.analog.com
Fax: 781/326-8703 © Analog Devices, Inc., 1998
ADG411/ADG412/ADG413–SPECIFICATIONS
1
Dual Supply
(VDD = +15 V 6 10%, VSS = –15 V 6 10%, VL = +5 V 6 10%, GND = 0 V, unless otherwise noted)
B Version T Version
–408C to –558C to
Parameter +258C +858C +258C +1258C Units Test Conditions/Comments
ANALOG SWITCH
Analog Signal Range V
R
ON
25 25 Ω typ VD = ±8.5 V, IS = –10 mA;
35 45 35 45 Ω max VDD = +13.5 V, V
LEAKAGE CURRENTS V
Source OFF Leakage I
(OFF) ±0.1 ±0.1 nA typ VD = ±15.5 V, VS = 715.5 V;
S
DD
to V
SS
VDD to VSSV
= –13.5 V
SS
= +16.5 V, VSS = –16.5 V
DD
±0.25 ± 5 ±0.25 ±20 nA max Test Circuit 2
Drain OFF Leakage I
(OFF) ±0.1 ±0.1 nA typ VD = ±15.5 V, VS = 715.5 V;
D
±0.25 ± 5 ±0.25 ±20 nA max Test Circuit 2
Channel ON Leakage I
, IS (ON) ±0.1 ±0.1 nA typ VD = VS = ±15.5 V;
D
±0.4 ±10 ±0.4 ±40 nA max Test Circuit 3
DIGITAL INPUTS
Input High Voltage, V
Input Low Voltage, V
INL
INH
2.4 2.4 V min
0.8 0.8 V max
Input Current
I
INL
or I
INH
0.005 0.005 µA typ VIN = V
INL
or V
INH
±0.5 ±0.5 µA max
DYNAMIC CHARACTERISTICS
t
ON
t
OFF
Break-Before-Make Time Delay, t
(ADG413 Only) V
2
110 110 ns typ RL = 300 Ω, CL = 35 pF;
175 175 ns max V
= ±10 V; Test Circuit 4
S
100 100 ns typ RL = 300 Ω, CL = 35 pF;
145 145 ns max V
25 25 ns typ RL = 300 Ω, CL = 35 pF;
D
= ±10 V; Test Circuit 4
S
= VS2 = +10 V;
S1
Test Circuit 5
Charge Injection 5 5 pC typ V
= 0 V, RS = 0 Ω, CL = 10 nF;
S
Test Circuit 6
OFF Isolation 68 68 dB typ R
= 50 Ω, CL = 5 pF, f = 1 MHz;
L
Test Circuit 7
Channel-to-Channel Crosstalk 85 85 dB typ R
= 50 Ω, CL = 5 pF, f = 1 MHz;
L
Test Circuit 8
(OFF) 9 9 pF typ f = 1 MHz
C
S
(OFF) 9 9 pF typ f = 1 MHz
C
D
CD, CS (ON) 35 35 pF typ f = 1 MHz
POWER REQUIREMENTS V
= +16.5 V, VSS = –16.5 V
DD
Digital Inputs = 0 V or 5 V
I
DD
0.0001 0.0001 µA typ
15 1 5 µA max
I
SS
0.0001 0.0001 µA typ
15 1 5 µA max
I
L
0.0001 0.0001 µA typ
15 1 5 µA max
NOTES
1
Temperature ranges are as follows: B Versions: –40°C to +85°C; T Versions: –55°C to +125°C.
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
REV. A–2–
ADG411/ADG412/ADG413
Single Supply
(VDD = +12 V 6 10%, VSS = 0 V, VL = +5 V 6 10%, GND = 0 V, unless otherwise noted)
B Version T Version
–408C to –558C to
Parameter +258C +858C +258C +1258C Units Test Conditions/Comments
ANALOG SIGNAL RANGE 0 V to V
R
ON
40 40 Ω typ 0 < VD = 8.5 V, IS = –10 mA;
DD
0 V to VDDV
80 100 80 100 Ω max VDD = +10.8 V
LEAKAGE CURRENTS V
Source OFF Leakage I
(OFF) ±0.1 ±0.1 nA typ VD = 12.2/1 V, VS = 1/12.2 V;
S
= +13.2 V
DD
±0.25 ± 5 ±0.25 ±20 nA max Test Circuit 2
Drain OFF Leakage I
(OFF) ±0.1 ±0.1 nA typ VD = 12.2/1 V, VS = 1/12.2 V;
D
±0.25 ± 5 ±0.25 ±20 nA max Test Circuit 2
Channel ON Leakage I
, IS (ON) ±0.1 ±0.1 nA typ VD = VS = +12.2 V/+1 V;
D
±0.4 ±10 ±0.4 ±40 nA max Test Circuit 3
DIGITAL INPUTS
Input High Voltage, V
Input Low Voltage, V
INL
INH
2.4 2.4 V min
0.8 0.8 V max
Input Current
I
INL
or I
INH
0.005 0.005 µA typ VIN = V
INL
or V
INH
±0.5 ±0.5 µA max
DYNAMIC CHARACTERISTICS
t
ON
t
OFF
Break-Before-Make Time Delay, t
(ADG413 Only) V
2
175 175 ns typ RL = 300 Ω, CL = 35 pF;
250 250 ns max V
= +8 V; Test Circuit 4
S
95 95 ns typ RL = 300 Ω, CL = 35 pF;
125 125 ns max V
25 25 ns typ RL = 300 Ω, CL = 35 pF;
D
= +8 V; Test Circuit 4
S
= VS2 = +10 V;
S1
Test Circuit 5
Charge Injection 25 25 pC typ V
= 0 V, RS = 0 Ω, CL = 10 nF;
S
Test Circuit 6
OFF Isolation 68 68 dB typ R
= 50 Ω, CL = 5 pF, f = 1 MHz;
L
Test Circuit 7
Channel-to-Channel Crosstalk 85 85 dB typ R
= 50 Ω, CL = 5 pF, f = 1 MHz;
L
Test Circuit 8
(OFF) 9 9 pF typ f = 1 MHz
C
S
(OFF) 9 9 pF typ f = 1 MHz
C
D
CD, CS (ON) 35 35 pF typ f = 1 MHz
POWER REQUIREMENTS V
= +13.2 V
DD
Digital Inputs = 0 V or 5 V
I
DD
0.0001 0.0001 µA typ
15 1 5 µA max
I
L
0.0001 0.0001 µA typ
15 1 5 µA max VL = +5.25 V
NOTES
1
Temperature ranges are as follows: B Versions: –40°C to +85°C; T Versions: –55°C to +125°C.
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
Truth Table (ADG411/ADG412)
ADG411 In ADG412 In Switch Condition
01ON
1 0 OFF
REV. A
Truth Table (ADG413)
Logic Switch 1, 4 Switch 2, 3
0 OFF ON
1 ON OFF
–3–
Loading...