Analog Devices AD8625 6 7 c Datasheet

Precision Low Power

FEATURES

SC70 package
Very low I
Single-supply operation: 5 V to 26 V
Dual-supply operation: ±2.5 V to ±13 V
Rail-to-rail output
Low supply current: 630 µA/amp typ
Low offset voltage: 500 µV max
Unity gain stable
No phase reversal

APPLICATIONS

Photodiode amplifiers
ATEs
Line-powered/battery-powered instrumentation
Industrial controls
Automotive sensors
Precision filters
Audio

GENERAL DESCRIPTION

The AD862x is a precision JFET input amplifier. It features
true single-supply operation, low power consumption, and
rail-to-rail output. The outputs remain stable with capacitive
loads of over 500 pF; the supply current is less than 630 µA/amp.
Applications for the AD862x include photodiode transimpedance
amplification, ATE reference level drivers, battery management,
both line powered and portable instrumentation, and remote
sensor signal conditioning, which includes automotive sensors.

: 1 pA max

B

Single-Supply JFET Amplifiers

AD8625/AD8626/AD8627

PIN CONFIGURATIONS

8-Lead SOIC

(R-8 Suffix)

NC

1
2

–IN V+

AD8627

3

+IN OUT

4

V– NC

NC = NO CONNECT

8-Lead SOIC

(R-8 Suffix)

OUT A

1
2

–IN A OUT B

+IN A –IN B

OUT A OUT D

–IN A –IN D
+IN A +IN D

+IN B +IN C
–IN B –IN C

OUT B OUT C

AD8626

3

4

V– +IN B

14-Lead SOIC

(R-Suffix)

114
213
312

AD8625

V+ V–

411
510
69
78

NC

8

7

6

5

V+

8
7

6

5

Figure 1.

5-Lead SC70

1
2

V–

+IN

3

8-Lead MSOP

1

4

14-Lead TSSOP

1

7

(KS Suffix)

AD8627

(RM-Suffix)

AD8626

(RU-Suffix)

AD8625

V+

5OUT A

–IN

4

8

V+OUT A
OUT B–IN A
–IN B+IN A
+IN BV–

5

14

OUT DOUT A
–IN D–IN A
+IN D+IN A
V–V+
+IN C+IN B
–IN C–IN B
OUT COUT B

8

03023-001

The AD862x’s ability to swing nearly rail-to-rail at the input
and rail-to-rail at the output enables it to be used to buffer
CMOS DACs, ASICs, and other wide output swing devices in
single-supply systems.

The 5 MHz bandwidth and low offset are ideal for precision
filters.

The AD862x is fully specified over the industrial temperature
range. (–40°C to +85°C). The AD8627 is available in both
5-lead SC70 and 8-lead SOIC surface-mount packages (SC70
packaged parts are available in tape and reel only). The AD8626
is available in MSOP and SOIC packages, while the AD8625 is
available in TSSOP and SOIC packages.

Rev. C

Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Anal og Devices. Trademarks and
registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
Fax: [phone] © 2004 Analog Devices, Inc. All rights reserved.

www.analog.com

AD8625/AD8626/AD8627

TABLE OF CONTENTS

AD8625/AD8626/AD8627 Specifications..................................... 3

Electrical Characteristics............................................................. 3

Electrical Characteristics............................................................. 4

Absolute Maximum Ratings............................................................ 5

Typical Performance Characteristics............................................. 6

Applications..................................................................................... 13

REVISION HISTORY

11/04—Data Sheet Changed from Rev. B to Rev. C

Updated Figure Codes .......................................................Universal

Changes to Figure 17 and 18........................................................... 8

Changes to Figure 33 and Figure 37............................................. 11

Changes to Figure 38...................................................................... 12

Changes to Figure 39 and Figure 40............................................. 13

Changes to Figure 41 to Figure 44................................................ 14

1/04—Data Sheet Changed from Rev. A to Rev. B

Change to General Description...................................................... 1

Change to Figure 10 ......................................................................... 7

Change to Figure13 .......................................................................... 7

Change to Figure 37 ....................................................................... 11

Changes to Figure 38...................................................................... 12

Change to Output Amplifier for DACs section.......................... 15

Updated Outline Dimensions....................................................... 19

Minimizing Input Current........................................................ 15

Photodiode Preamplifier Application...................................... 15

Output Amplifier for DACs...................................................... 16

Eight-Pole Sallen Key Low-Pass Filter..................................... 17

Outline Dimensions .......................................................................18

Ordering Guide .......................................................................... 19

10/03—Data Sheet Changed from Rev. 0 to Rev. A

Addition of two new parts
Change to General Description
Changes to Pin Configurations
Change to Specifications table…………………………………………3
Changes to Figure 31
Changes to Figure 32
Changes to Figure 38
Changes to Figure 46
Changes to Figure 47
Changes to Figure 49

Updated Outline Dimensions....................................................... 18

Changes to Ordering Guide

…………………………………Universal

………………………………………. 1

…………………....................................1

…………………………….................................... 10

…………………………….....................................11

…………………………….................................... 12

…………………………….................................... 16

…………………………….....................................16

…………………………….....................................17

…………………........................................ 19

Rev. C | Page 2 of 20

AD8625/AD8626/AD8627

AD8625/AD8626/AD8627 SPECIFICATIONS

ELECTRICAL CHARACTERISTICS

@VS = 5 V, VCM = 1.5 V, TA = 25°C, unless otherwise noted.

Table 1.

Parameter Symbol Conditions Min Typ Max Unit

INPUT CHARACTERISTICS
Offset Voltage VOS 0.05 0.5 mV

−40°C < TA < +85°C 1.2 mV
Input Bias Current I

B

–40°C < TA < +85°C 60 pA
Input Offset Current I

OS

–40°C < TA < +85°C 25 pA
Input Voltage Range 0 3 V
Common-Mode Rejection Ratio CMRR VCM = 0 V to 2.5 V 66 87 dB
Large Signal Voltage Gain A

VO

Offset Voltage Drift ∆VOS/∆T –40°C < TA < +85°C 2.5 µV/°C
OUTPUT CHARACTERISTICS
Output Voltage High V

OH

I
Output Voltage Low V

OL

I
Output Current I

OUT

POWER SUPPLY
Power-Supply Rejection Ratio PSRR VS = 5 V to 26 V 80 104 dB
Supply Current/Amplifier I

SY

–40°C < TA < +85°C 800 µA
DYNAMIC PERFORMANCE
Slew Rate SR 5 V/µs
Gain Bandwidth Product GBP 5 MHz
Phase Margin Ø

M

NOISE PERFORMANCE
Voltage Noise en p-p 0.1 Hz to 10 Hz 1.9 µV p-p
Voltage Noise Density e
Current Noise Density i
Channel Separation C

n

n

s

0.25 1 pA

0.5 pA

RL = 10 kΩ, VO = 0.5 V to 4.5 V 100 230 V/mV

4.92 V
= 2 mA, –40°C < TA < +85°C 4.90 V

L

0.075 V

= 2 mA, –40°C < TA < +85°C 0.08 V

L

±10 mA

630 785 µA

60 Degrees

f = 1 kHz 17.5 nV/√Hz
f = 1 kHz 0.4 fA/√Hz
f = 1 kHz 104 dB

Rev. C | Page 3 of 20

AD8625/AD8626/AD8627

ELECTRICAL CHARACTERISTICS

@VS = ±13 V; VCM = 0 V; TA = 25°C, unless otherwise noted.

Table 2.

Parameter Symbol Conditions Min Typ Max Unit

INPUT CHARACTERISTICS
Offset Voltage V

OS

–40°C < TA < +85°C 1.35 mV
Input Bias Current I

B

–40°C < TA < +85°C 60 pA
Input Offset Current I

OS

–40°C < TA < +85°C 25 pA
Input Voltage Range –13 +11 V
Common-Mode Rejection Ratio CMRR V
Large Signal Voltage Gain A

VO

Offset Voltage Drift ∆VOS/∆T –40°C < TA < +85°C 2.5 µV/°C
OUTPUT CHARACTERISTICS
Output Voltage High V
V
Output Voltage Low V
V
Output Current I

OH

OH

OL

OL

OUT

POWER SUPPLY
Power-Supply Rejection Ratio PSRR VS = ±2.5 V to ±13 V 80 104 dB
Supply Current/Amplifier I

SY

–40°C < TA < +85°C 900 µA
DYNAMIC PERFORMANCE
Slew Rate SR 5 V/µs
Gain Bandwidth Product GBP 5 MHz
Phase Margin Ø

M

NOISE PERFORMANCE
Voltage Noise en p-p 0.1 Hz to 10 Hz 2.5 µV p-p
Voltage Noise Density e
Current Noise Density i
Channel Separation C

n

n

s

0.35 0.75 mV

0.25 1 pA

0.5 pA

= –13 V to +10 V 76 105 dB

CM

RL = 10 kΩ, VO = –11 V to +11 V 150 310 V/mV

+12.92 V
IL = 2 mA, –40°C < TA < +85°C +12.91 V
–12.92 V
IL = 2 mA, –40°C < TA < +85°C –12.91 V
±15 mA

710 850 µA

60 Degrees

f = 1 kHz 16 nV/√Hz
f = 1 kHz 0.5 fA/√Hz
f = 1 kHz 105 dB

Rev. C | Page 4 of 20

AD8625/AD8626/AD8627

ABSOLUTE MAXIMUM RATINGS

Absolute maximum ratings apply at 25°C, unless otherwise
noted.

Table 3. Stress Ratings

Parameter Ratings

Supply Voltage 27 V
Input Voltage VS– to V

S+

Differential Input Voltage ± Supply Voltage
Output Short-Circuit Duration Indefinite
Storage Temperature Range, R Package

Operating Temperature Range
Junction Temperature Range, R Package

−65°C to +125°C

−40°C to +85°C

−65°C to +150°C

Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may
affect device reliability.

Lead Temperature Range (Soldering, 60 sec) 300°C

Table 4.

Package Type θJA

1

θ

JC

Unit

5-Lead SC70 (KS) 376 126 °C/W
8-Lead MSOP (RM) 210 45 °C/W
8-Lead SOIC (R) 158 43 °C/W
14-Lead SOIC (R) 120 36 °C/W
14-Lead TSSOP (RU) 180 35 °C/W

1

θJA is specified for worst-case conditions when devices are soldered in circuit

boards for surface-mount packages.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.

Rev. C | Page 5 of 20

AD8625/AD8626/AD8627

TYPICAL PERFORMANCE CHARACTERISTICS

25

VSY =±12V
T

= 25°C

A

20

16

14

12

VSY = +3.5V/–1.5V

15

10

NUMBER OF AMPLIFIERS

5

0

–600 –400

–200

VOLTAGE (µV)

0 200 400 600

Figure 2. Input Offset Voltage

12

10

8

6

4

NUMBER OF AMPLIFIERS

2

0

012345678910

OFFSET VO LTAGE (µV/°C)

Figure 3. Offset Voltage Drift

18

VSY = +3.5V/–1.5V

16

14

12

10

8

6

NUMBER OF AMPLIFIERS

4

2

0

–400 –300 –200 –100 0 100 200 300

VOLTAGE (µV)

Figure 4. Input Offset Voltage

VSY =±13V

03023-002

03023-003

03023-004

10

8

6

NUMBER OF AMPLIFIERS

4

2

0

012345678910

OFFSET VO LTAGE (µV/°C)

Figure 5. Offset Voltage Drift

50

VSY =±13V

= 25°C

T

40

A

30

20

10

0

–10

–20

INPUT BIAS CURRENT (pA)

–30

–40

–50

–15.0–12.5–10.0 –7.5 –5.0 –2.5 0 2.5 5.0 7.5 10.0 12.5 15.0

Figure 6. Input Bias Current vs. V

VCM (V)

CM

0

VSY =±13V

–0.1

= 25°C

T

A

–0.2

–0.3

–0.4

–0.5

–0.6

–0.7

INPUT BIAS CURRENT (pA)

–0.8

–0.9

–15.0–12.5–10.0 –7.5 –5.0 –2.5 0 2.5 5.0 7.5 10.0 12.5 15.0

Figure 7. Input Bias Current vs. V

VCM (V)

CM

03023-005

03023-006

03023-007

Rev. C | Page 6 of 20