AMX SPK-W User Manual

Installation Guide

SPK-W Wall Speakers

Overview

AMX wall speakers (FIG. 1) are designed using superior components,
materials and crossover design, including the use of Neodymium magnets
which are significantly lighter and more powerful; all resulting in exceptional
sonic performance. AMX speaker enclosures incorporate a unique pivoting
tweeter assembly that creates directionality for the user.

FIG. 1 Matrix SPK-W Wall Speakers (with and without aluminum grill)

Models Available

• SPK-W6.5 (FG1130-31): 6.5" Speaker Pair, 125W

• SPK-W8 (FG1130-33): 8" Speaker Pair, 150W

Common Application

Great for homes, condominium buildings, retail environments and
restaurants that require in-wall speaker installation.

Features

• Constructed of mineral-filled anodized injection molded polypropylene
for exceptional acoustical performance

• Enclosure incorporates a floating bridge, which houses a unique
pivoting tweeter assembly that creates directionality for the user.

Specifications

SPK-W Wall Speakers - Specifications

Models Available: • SPK-W6.5 (FG1130-31): 6.5" Speaker Pair, 125W

Dimensions (HWD): • SPK-W6.5: 12” x 8 9/16” x 3 7/8”

Power Requirement: 5-80 W

Recommended Power: • SPK-W6.5: 5 - 125W

Woofer: • Constructed of mineral-filled anodized injection molded

Tweeter: • Pivoting Silk Dome

Crossover: 24dB/Octave acoustical slopes

Sensitivity (at 2.83v): • SPK-W6.5: 89dB

Frequency Response
(+/-3dB):

Nominal Impedance: • 8 Ohms

• SPK-W8 (FG1130-33): 8" Speaker Pair, 150W

(30.5 cm x 21.8 cm x 9.8 cm)

• SPK-W8: 14 3/4” x 11 3/8” x 3 7/8”
(37.5 cm x 28.9 cm x 9.8 cm)

• SPK-W8: 10 - 150W

polypropylene.

• Diameter = SPK-W6.5 = 6.5", SPK-W8 = 8”

• Diameter = 25mm

• Tweeter Level-Adjust Switch: Adjusts high-frequency
level (-3dB, 0dB or +3dB)

• SPK-W8: 90dB

• SPK-W6.5: 50Hz - 20kHz

• SPK-W8: 45Hz - 20kHz

SPK-W Wall Speakers - Specifications (Cont.)

Included Accessories: • Grill: White aluminum grill (grills may be painted to match

decor)

• Back Box:

W6s: 105° ABS 0.4kg
W8s: 105° ABS 0.6kg

Connections

• Each speaker has a Red (positive) terminal and a Black (negative) ter­minal.

• Connect the appropriate wire from the keypad to Red and Black termi­nals on the Left and Right speakers, as with any standard speaker
installation.

High-Frequency Level-Adjust Switch

The tweeter features a level-adjust switch which allows you to select your
preferred high-frequency level; -3dB, 0dB or +3dB.

Pivoting Tweeter

Twe et er L ev el ­Adjust Switch

FIG. 2 Matrix Wall Speakers

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

12/08

©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax [phone] • technical support 800.932.6993 • www.amx.com

93-1130-02 REV: B