AMX SAA596807, SAA596803, SAA596805 User Manual
INSTALLATION & HARDWARE REFERENCE MANUAL
MODERO X® SERIES G5 TOUCH PANELS
MXT-2001-PAN
20.3" MODERO X SERIES G5 PANORAMIC TABLETOP TOUCH PANEL
MXD-2001-PAN-L
MXD-2001-PAN-P
MXT-1901-PAN
19.4" MODERO X SERIES G5 PANORAMIC TABLETOP TOUCH PANEL
MXD-1901-PAN-L
MXD-1901-PAN-P
MXT-1001
MXD-1001-L
MXD-1001-P
MXT-701
MXD-701-L
MXD-701-P
10.1" MODERO X SERIES G5 TABLETOP TOUCH PANEL
10.1" MODERO X SERIES G5 LANDSCAPE WALL MOUNT TOUCH PANEL
10.1" MODERO X SERIES G5 PORTRAIT WALL MOUNT TOUCH PANEL
7" MODERO X SERIES G5 TABLETOP TOUCH PANEL
7" MODERO X SERIES G5 LANDSCAPE WALL MOUNT TOUCH PANEL
7" MODERO X SERIES G5 PORTRAIT WALL MOUNT TOUCH PANEL
20.3" MODERO X SERIES G5 PANORAMIC LANDSCAPE WALL MOUNT TOUCH PANEL
20.3" MODERO X SERIES G5 PANORAMIC PORTRAIT WALL MOUNT TOUCH PANEL
19.4" MODERO X SERIES G5 PANORAMIC LANDSCAPE WALL MOUNT TOUCH PANEL
19.4" MODERO X SERIES G5 PANORAMIC PORTRAIT WALL MOUNT TOUCH PANEL
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on
the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
17. Where th e mains plug or an appliance coup ler is used as the disconnect device, the disc onnect device shall remain readily operable.
18. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of suff icient magnitude to constitute a risk of electrical shock to persons.
ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside
source (such as human hands) into an integrated circuit, often resulting in damage to the circuit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: No naked flame sources - such as candles - should be placed on the product.
WARNING: Equipment shall be connected to a MAINS socket outlet with a protective earthing connection.
WARNING: To reduce the risk of electric shock, grounding of the center pin of this plug must be maintained.
COPYRIGHT NOTICE
AMX© 2015, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright protection claimed
extends to AMX hardware and software and includes all forms and matters copyrightable material and information now allowed by statutory or judicial
law or herein after granted, including without limitation, material generated from the software programs which are displayed on the screen such as
icons, screen display looks, etc. Reproduction or disassembly of embodied computer programs or algorithms is expressly prohibited.
LIABILITY NOTICE
No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the preparation of this
publication, AMX assumes no responsibility for error or omissions. No liability is assumed for damages resulting from the use of the information
contained herein. Further, this publication and features described herein are subject to change without notice.
AMX WARRANTY AND RETURN POLICY
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
ESD WARNING
To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before
touching any internal materials.
When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be
followed to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive
smocks, and conductive work mats are specifically designed for this purpose.
Anyone performing f ield maintenance on AMX equipment should use an appropriate ESD f ield service kit complete with at
least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with another ground cord
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are
hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified
service personnel.
Place the equipment near a main power supply ou tlet and make sure that you can
easily access the power breaker switch.
WARNING: This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or
included, power supply of the product. Operation from other voltages other than those indicated may cause irreversible
damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the
product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a
detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are
unsure of the correct operational voltage, please contact your local distributor and/or retailer.
FCC AND CANADA EMC COMPLIANCE INFORMATION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class B Digital Device.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this
device.
CAN ICES-3 (B)/NMB-3(B)
WIRELESS TRANSMITTER COMPLIANCE INFORMATION:
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
Le terme "IC:" avant le numéro de certification radio signifie seulement que les spécifications techniques d'Industrie Canada
ont été respectées.
This device complies with part 15 of the FCC Rules and the applicable Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Cet appareil est conforme à FCC et IC l'exposition aux rayonnements limites fixées pour un environnement non contrôlé. Cet
appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet transmetteur ne
doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur.
4
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC Directive
2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU; European Union
WEEE (recast) Directive 2012/19/EU; European Union Radio and Telecommunications Terminal Equipment (R&TTE) Directive
1999/5/EC.
You may obtain a free copy of the Declaration of Conformity by visiting http://www.amx.com/techcenter/certifications.asp.
WEEE NOTICE:
This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic
equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be
deposited at an appropriate facility to enable recovery and recycling.
CHINA COMPLIANCE INFORMATION:
This device is designed and evaluated under the condition of non-tropical climate; it can only be used in
locations in non-tropical climate areas. Using the device in tropical climate areas could result in a
potential safety hazard.
This device is designed and evaluated under the condition of altitude below 2000 meters above sea
level; it can only be used in locations below 2000 meters above sea level. Using the device above 2000
meters could result in a potential safety hazard.
Table o f C o n tent s
5
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Table of Contents
Modero X Series G5 Touch Panels ....................................................................7
Overview ........................................................................................................................... 7
Sleep Button ...................................................................................................................... 8
Powering On/Off X Series G5 Panels ...................................................................................................... 8
Configuration and Programming ...................................................................................... 8
Bluetooth Support ............................................................................................................. 8
NFC Support ...................................................................................................................... 9
Active Video Windows - Limitations .................................................................................. 9
Cleaning the Touch Overlay and Case............................................................................... 9
Additional Documentation.............................................................................................. 10
MXT/D-2001-PAN - 20.3" X Series G5 Panels ................................................11
MXT-2001-PAN (Tabletop) ............................................................................................ 11
MXT-2001-PAN Specifications ............................................................................................................ 11
MXD-2001-PAN (Wall-Mount - Landscape/Portrait) ..................................................... 13
MXD-2001-PAN Specifications ............................................................................................................ 13
MXT/D-1901-PAN - 19.4" X Series G5 Panels ................................................16
MXT-1901-PAN (Tabletop) ............................................................................................ 16
MXT-1901-PAN Specifications ............................................................................................................. 16
MXD-1901-PAN (Wall-Mount - Landscape/Portrait) ..................................................... 18
MXD-1901-PAN Specifications ............................................................................................................ 18
MXT/D-1001 - 10.1" X Series G5 Panels ........................................................21
MXT-1001 (Tabletop)..................................................................................................... 21
MXT-1001 Specifications ..................................................................................................................... 21
Touch Panel Aspect Ratio................................................................................................................................... 23
MXD-1001 (Wall-Mount - Landscape/Portrait) .............................................................. 23
MXD-1001 Specifications ..................................................................................................................... 23
Touch Panel Aspect Ratio................................................................................................................................... 25
MXT/D-701 - 7" X Series G5 Panels ................................................................26
MXT-701 (Tabletop) ....................................................................................................... 26
MXT-701 Specifications ....................................................................................................................... 26
Touch Panel Aspect Ratio................................................................................................................................... 27
MXD-701 (Wall-Mount - Landscape/Portrait)................................................................. 28
MXD-701 Specifications ....................................................................................................................... 28
Touch Panel Aspect Ratio................................................................................................................................... 30
Installing Tabletop (MXT) Panels ...................................................................31
MXT-2001-PAN / MXT-1901-PAN.................................................................................. 31
Connector Locations - MXT-2001-PAN / MXT-1901-PAN.................................................................... 31
Table o f C o n tent s
6
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
MXT-1001 / MXT-701 ..................................................................................................... 32
Connector Locations - MXT-1001/MXT-701........................................................................................ 32
Power via 13.5V ....................................................................................................................................... 32
Wiring a 13.5V Power Connection ..................................................................................................................... 32
Power via PoE ....................................................................................................................................... 32
Ethernet Cable Installation and Modification..................................................................................................... 33
Installing Wall-Mount (MXD) Panels ...............................................................34
A Note About Wall and Rack Installation ....................................................................... 34
Installation Recommendations ............................................................................................................ 35
MXD-2001-PAN / MXD-1901-PAN Installation ............................................................... 35
Installing the MXD-2001-PAN / MXD-1901-PAN Into a Wall ............................................................... 35
MXD-2001-PAN Dimensions............................................................................................................................... 36
MXD-1901-PAN Dimensions............................................................................................................................... 37
Installing the Backbox .......................................................................................................................... 38
MXD-2001-PAN Installation Dimensions ........................................................................................................... 38
MXD-1901-PAN Installation Dimensions ........................................................................................................... 39
Power via 13.5V ....................................................................................................................................... 41
Wiring a 13.5V Power Connection ..................................................................................................................... 42
Uninstalling the MXD-2001-PAN / MXT-1901-PAN ............................................................................. 42
Removing the Panel From Its Backbox............................................................................................................... 42
MXD-1001 / MXD-701 Installation ................................................................................ 43
Installing the MXD-1001 / MXD-701 Into a Wall ................................................................................. 43
MXD-1001 Dimensions ....................................................................................................................................... 44
MXD-701 Dimensions ......................................................................................................................................... 45
Installing the Backbox .......................................................................................................................... 46
MXD-1001 Installation Dimensions ................................................................................................................... 46
MXD-701 Installation Dimensions...................................................................................................................... 47
Power via PoE ....................................................................................................................................... 50
Ethernet Cable Installation and Modification..................................................................................................... 50
Uninstalling the MXD-1001 .................................................................................................................. 51
Removing the MXD-1001 From Its Backbox ...................................................................................................... 51
Uninstalling the MXD-701 .................................................................................................................... 52
Removing the MXD-701 From Its Backbox ........................................................................................................ 52
Appendix: Troubleshooting ............................................................................. 53
Overview .......................................................................................................................... 53
Panel Doesn’t Respond To Touches ..................................................................................................... 53
Panel Isn’t Appearing In The Online Tree Tab ..................................................................................... 53
Can’t Connect To a NetLinx Master ...................................................................................................... 53
Only One Modero Panel In My System Shows Up ................................................................................. 53
7
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Modero X Series G5 Touch Panels
Overview
The most elegant interface designed specifically for dedicated room control has been significantly enhanced to include a new G5
Graphic Engine to provide even faster and smoother animations and transitions, and we quadrupled the processing power with a
new Quad Core Processor. This new generation of touch panels is built for usability offering edge-to-edge capacitive touch glass
with multi-touch capabilities. It features advanced technology empowering users to operate AV equipment seamlessly, while
providing the ultimate in audio and video quality. The distinctive appearance will complement even the most sophisticated meeting
facilities and homes. With a lightning fast processor, brilliant graphics and enhanced capabilities, the Modero X Series is the control
surface that simply delivers more.
Modero X Series G5 Touch Panels
FIG. 1
Modero X Series G5 Touch Panels
The Modero X Series G5 Touch Panels covered in this manual include:
Modero X Series G5 Touch Panels
Name FG# Description Page Ref
MXT-2001-PAN FG5968-35 20.3" Modero X Series G5 Panoramic Tabletop page 11
MXD-2001-PAN-P
MXD-2001-PAN-L
MXT-1901-PAN FG5968-41 19.4" Modero X Series G5 Panoramic Tabletop page 16
MXD-1901-PAN-P
MXD-1901-PAN-L
MXT-1001 FG5968-47 10.1" Modero X Series G5 Tabletop page 21
MXD-1001-P
MXD-1001-L
MXT-701 FG5968-53 7" Modero X Series G5 Tabletop page 26
MXD-701-P
MXD-701-L
NOTE: Note: The X Series G5 panels described in this document represent a different product family than the X Series (G4) touch
panels. For information on X Series G4 touch panels, refer to the Modero X Series G4 Touch Panels Instruction Manual.
Portrait: FG5968-36
Landscape: FG5968-37
Portrait: FG5968-42
Landscape: FG5968-43
Portrait: FG5968-48
Landscape: FG5968-49
Portrait: FG5968-54
Landscape: FG5968-55
20.3" Modero X Series G5 Panoramic Wall-Mounts page 13
19.4" Modero X Series G5 Panoramic Wall-Mounts page 18
10.1" Modero X Series G5 Wall-Mounts page 23
7" Modero X Series G5 Wall-Mounts page 28
Modero X Series G5 Touch Panels
8
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Sleep button
Sleep button
(on top panel)
(on top panel)
Sleep button
(on left panel)
Press to power of the panel
Press to access the Settings menu
Sleep Button
X Series G5 touch panels are operated using its integral touchscreen, as well as the Sleep button. The Sleep button is located in the
in the center of the top panel of the device for tabletop and landscape wall-mount panels; it is located in the center of the left panel
for portrait panels (see FIG. 2 on page 8).
FIG. 2
Sleep Button location - Tabletop, Landscape and Portrait layouts)
If the device has gone into its Sleep Mode, touching the touchscreen or pressing the Sleep button will reactivate it. Press and hold
the Sleep button to access the Settings menu.
Powering On/Off X Series G5 Panels
Modero X Series G5 touch panels may be powered on by touching the Sleep button. To power off the panel, press and hold the
Sleep button, and select Power Off on the on-screen menu (FIG. 3):
FIG. 3 Sleep Button - Press to power on the panel; press and hold to access Power Off/Settings options
Conf iguration and Programming
X Series G5 touch panels are equipped with a Settings menu that provides the ability to conf igure variou s features on the panels. To
access the Settings menu, press and hold the Sleep button, and select Settings (FIG. 3). This opens the main Settings menu
(FIG. 4):
FIG. 4 Main Settings menu
Information on the Settings menu, panel conf iguration, and programming is included in the Modero X Series G5 Programming
Guide, available at www.amx.com.
NOTE: Note: Programming the Modero X Series G5 touch panels require the use of the latest versions of NetLinx Studio and
TPDesign5, both available to download at www.amx.com.
Bluetooth Support
X Series G5 touch panels allow the use of Bluetooth keyboard and mouse combinations, using HID Prof ile v1.1. Using a keyboard
and mouse with the device requires use of the MXA-BT Bluetooth USB Adapter (FG5968-19).
Modero X Series G5 Touch Panels
9
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
NFC Sensor
NFC Sensor
NFC Sensor
NFC Support
X Series G5 touch panels support Near Field Communications™ (NFC) Technology. NFC technology facilitates making transactions,
exchanging digital content, and connecting electronic devices with a touch. NFC transmissions are short-range (from a touch to a
few centimeters), working with existing contact-less card technologies and containing built-in capabilities to support secure
applications. By using NFC technology, users may receive access to touch panels and touch panel pages through access badges
and other card options.
Common Access Card (CAC) Support In MXT/D-2000XL-PAN
Card Type Card Unique Identifier (UID) Card Data Personal Identity Verification (PIV) Card holder UID
15693 8 byte UID Not Supported N/A
14443A Non-Gov't 4, 7 or 10 byte UID (1) Not Supported N/A
14443A Gov't 4, 7 or 10 byte UID (1) Not Supported (2) Not currently
14443B Non-Gov't 4 byte UID Not Supported N/A
14443B Gov't 4 byte UID Not Supported (2) No t currently
FeliCa Not Supported Not Supported N/A
(1) The UID can be a fixed unique number or a random number dynamically generated by the card.
(2) Requires contact card reader (not accessible via NFC)
The maximum range for the NFC antenna is 0.5" (12.7mm), but the typical usage range is 0.25" (6.35mm).
The antenna itself is accessible from the front of the panel, 3.25" (82.55mm) from the left corner of the panel and 0.375"
(9.53mm) from the top edge.
When using an NFC device with the X Series G5 panels, align your device’s antenna with the center of the touch panel’s antenna
(FIG. 5):
FIG. 5 NFC antenna location (Tabletop, Landscape and Portrait layouts)
Active Video Windows - Limitations
The following limitations apply to the display of active video windows on X Series G5 panels:
NOTE: The term "Active Video Windows" refers to any "window" on the touch panel (which could be a Page, Popup, Sub-Page or
Button) that is displaying active video content.
Maximum supported number of active video windows displayed simultaneously on the panel: 2
While this limitation is not enforced (i.e the TPDesign5 application will allow you include any number of video windows in
the panel design), attempting to display more than two active video windows at one time may have a negative impact on
the panel’s overall performance.
Maximum supported resolution for video windows: 720dpi
Maximum supported frame rate for video windows: 30fps
Cleaning the Touch Overlay and Case
X Series G5 touch panels come with the MXA-CLK Modero X Series Cleaning Kit (FG5968-16), which may be used to clean
fingerprints and dirt from the device. This kit comes with cleaning cloths and a bottle of cleaning fluid specifically for use with the
device.
When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and then apply the
cloth to the touch screen.
Do NOT use abrasives of any type to clean the device, as abrasives may permanently damage or remove the device’s finish.
Modero X Series G5 Touch Panels
10
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Additional Documentation
Refer to the Modero X Series G5 Touch Panels Conf iguration and Programming Manual for details on conf iguring and programming
G5 touch panels, including:
Information on Modero X Series G5 Programming, including Transitioning from G4 to G5
Detailed descriptions of each page and page option available in the G5 Settings Menu
Firmware upgrades via the G5 Settings Menu (Reset and Update page)
Using Content Sharing
Using Gestures
MXA-MP and MXA-MPL Programming
Detailed descriptions of all G5-supported Send Commands and SSH Commands
NOTE: Refer to the Modero G5 Configuration and Programming - X Series G5 Touch Panels Instruction Manual for details.
NOTE: Touch Panel files for G5 Touch Panels are created via TPDesign5 software (available to download from www.amx.com). Refer to
the TPDesign5 online help and Instruction Manual for details.
MXT/D-2001-PAN - 20.3" X Series G5 Panels
11
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Sleep Button
NFC Sensor
USB Ports (2)
Cable Slot
MXT/D-2001-PAN - 20.3" X Series G5 Panels
MXT-2001-PAN (Tabletop)
FIG. 6 MXT-2001-PAN touch panel
MXT-2001-PAN Specif ications
MXT-2001-PAN Specif ications
DIMENSIONS (HWD) 9 3/16" x 20 3/8" x 5 7/8" (235mm x 519mm x 150mm)
WEIGHT 12.3 lbs (5.58 Kg)
POWER CONSUMPTION • Full-On: 35 W (13.5V , 2.6A)
• Standby: 7 W (13.5V , 0.52A)
EXTERNAL POWER
SUPPLY REQUIRED
CERTIFICATIONS • FCC Part 15 Class B
TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS)
VIEWING ANGLE • Vertical: ± 89°
MEMORY • SDRAM: 2 GB
Requires one of these AMX power sources (not included):
• PSR4.4 Power Supply, 4.5A, 3.5mm Phoenix with Retention Screws (FG423-46)
• PSN4.4 Power Supply, 4.5A, 3.5mm Phoenix, 13.5V (discontinued) (FG423-45)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
• C-Tick CISPR 22 Class B
• CE EN 55022 Class B and EN 55024
• CB Scheme IEC 60950-1
•IC
• IEC/EN-60950
•UL 60950-1
•RoHS/WEEE compliant
• Display Size (WH): 20.4" x 9.5" (519mm x 242mm), 21.3" (541mm) diagonal
• Viewable Area (WH): 18.7" x 7.8" (475mm x 198mm ), 20.3" (514mm) diagonal
• Resolution: 1920x800
• Aspect Ratio: 12:5
• Brightness: 250 cd/m2
• Contrast Ratio: 1000:1
• Color Depth: 16.7M colors
• Illumination: LED
• Touch Overlay: Projected capacitive, multi-touch support, 3 simultaneous max
• Horizontal: ± 89°
•Flash: 16 GB
• Maximum Project Size: 12 GB flash, available for apps and touch panel files
MXT/D-2001-PAN - 20.3" X Series G5 Panels
12
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
MXT-2001-PAN Specif ications (Cont.)
COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP,
VIDEO • Supported Video Codecs:
AUDIO • Microphone: -42 dB ±3 dB sensitivity FET microphone
GRAPHICS ENGINE AMX G5: G5 enhanced feature set supporting multi-touch and gestures, scrolling, transitions, applications -
EMBEDDED
APPLICATIONS
FRONT PANEL
COMPONENTS
CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector
ENVIRONMENTAL • Temperature (Operating): 32°F to 104°F (0°C to 40°C)
INCLUDED
ACCESSORIES
OPTIONAL
ACCESSORIES
* This feature will be available upon release of a future firmware update.
ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP
• USB: (3) USB host 2.0, Type A ports: Firmware upgrade, Touch Panel File Transfer, document and image
viewing, HID Peripherals
• Near Field Communication (NFC): Supports standards ISO/IEC 15693, ISO/IEC 14443A, ISO/IEC 14443B;
Unique Identifier (UID), typ range=.25", max = .5"
• Bluetooth: Mouse/Keyboard: HID Profile v1.1, requires MXA-BT Bluetooth Adapter (FG5968-19)
MPEG2-TS: MPEG-2 Main Profile @High Level up to 720p at 25 fps (decode only)
MPEG-2-TS: H.264 High Profile @Layer 4, AAC-LC up to 720p at 25 fps (encode/decode)
MJPEG up to 720p at 25 fps (decode only)
• Supported Video Transport Streams: MPEG-TS for MPEG-2 and H.264, HTTP for MJPEG
• Max Number of Active Video Streams: 2 (720dpi/30fps)
• Video Conferencing: Panel-to-panel and video chat*
• Speakers: 4 ohm, 2 Watt, 300 Hz cutoff frequency
• Supported Audio Codecs: MP2 Layer I and II, MP3 (8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz), AAC-LC (8 kHz, 96 kHz), G.711 with μLaw (VoIP* encode/decode at 8 kHz)
Suggested max packet size for G.711 Voice: 20ms
• File Formats: WAV, MP3 (as part of touch panel file only - no USB storage)
•Intercom*: Full Duplex VoIP, SIP v2.0
See TPD5 Operations Guide for more information
• Viewer Applications*: PDF, JPEG, BMP, PNG, TIFF, GIF
• Remote Management: VNC Server
• Video Conferencing: Skype
• Audio Conferencing: Audio (Full Duplex Intercom*)
• Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness
• Proximity Detector: Max range = ~3', typ range = ~1', FOV = ~10 degrees
• Camera: HD 720p camera for video conferencing/video chat support
• LED Indicators: Camera active indicator
• Sleep Button: Sleep button to activate sleep mode and powering o ff. Also provides access to setup pages
(can be disabled)
•USB:
(3) USB host 2.0, Type A ports: Firmware upgrade, Touch Panel File Transfer, document and Image viewing
(1) Micro-USB device port (currently not in use)
• Power: 2-pin, locking 3.5mm Phoenix connector
• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
On: 119.4 BTU/hr
Standby: 23.9 BTU/hr
• Locking 2-pin Phoenix mate (41-0002-SA)
• MXA-USB-C, USB Port Cover Kit, Modero X/S Series Touch Panel (FG5968-18)
• HPG-10-10K, 3/4" Mini-Grommet (FG570-01)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-STMK-20, Secure Table Mount Kit, 20.3" Modero X Tabletop (FG5968-64)
• PSR4.4 Power Supply, 4.5A, 3.5mm Phoenix with Retention Screws (FG423-46)
• PSN4.4 Power Supply, 4.5A, 3.5mm Phoenix, 13.5V (discontinued) (FG423-45)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
• HPG-10-10K, 3/4" Mini-Grommet, 10-Pack (FG570-01-10K)
• MXA-BT, Bluetooth USB Adapter for Modero X/S Series (FG5968-19)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-USB-C, USB Port Covers for the Modero X/S Series Touch Panels (FG5968-18)
MXT/D-2001-PAN - 20.3" X Series G5 Panels
13
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Sleep ButtonNFC Sensor
Sleep
NFC
Button
Sensor
MXD-2001-PAN-P
MXD-2001-PAN-L
MXD-2001-PAN (Wall-Mount - Landscape/Portrait)
The MXD-2001-PAN is available in Portrait and Landscape layouts:
Portrait MXD-2001-PAN-P FG5968-36
Landscape MXD-2001-PAN-L FG5968-37
FIG. 7 MXD-2001-PAN-P/L (Portrait and Landscape)
MXD-2001-PAN Specifications
MXD-2001-PAN Specif ications
DIMENSIONS (HWD) • Landscape: 9 1/2" x 20 3/8" x 11/16" (242mm x 519mm x 19mm)
• Portrait: 20 3/8" x 9 1/2" x 11/16" (519mm x 242mm x 19mm
WEIGHT 9.0 lbs (4.08 Kg)
POWER CONSUMPTION • Full-On: 35 W (13.5V , 2.6A)
• Standby: 7 W (13.5V , 0.52A)
EXTERNAL POWER
SUPPLY REQUIRED
CERTIFICATIONS • FCC Part 15 Class B
Requires one of these AMX power sources (not included):
• PSR4.4 Power Supply, 4.5A, 3.5mm Phoenix with Retention Screws (FG423-46)
• PSN4.4 Power Supply, 4.5A, 3.5mm Phoenix, 13.5V (discontinued) (FG423-45)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
• C-Tick CISPR 22 Class B
• CE EN 55022 Class B and EN 55024
• CB Scheme IEC 60950-1
•IC
• IEC/EN-60950
•UL 60950-1
•RoHS/WEEE compliant
MXT/D-2001-PAN - 20.3" X Series G5 Panels
14
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
MXD-2001-PAN Specif ications (Cont.)
TOUCH SCREEN
DISPLAY
VIEWING ANGLE • Vertical: ± 89°
MEMORY • SDRAM: 2 GB
COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP,
VIDEO • Supported Video Codecs:
AUDIO • Microphone: -42 dB ±3 dB sensitivity FET microphone
GRAPHICS ENGINE AMX G5: G5 enhanced feature set supporting multi-touch and gestures, scrolling, transitions, applications - See
EMBEDDED
APPLICATIONS
FRONT PANEL
COMPONENTS
• Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS)
•Display Size (WH)
Landscape: 20.4" x 9.5" (519mm x 242mm), 21.3" (541mm) diagonal
Portrait: 9.5" x 20.4" (242mm x 519mm), 21.3" (541mm) diagonal
• Viewable Area (WH)
Landscape 18.7" x 7.8" (475mm x 198mm ), 20.3" (514mm) diagonal
Portrait 7.8" x 18.7" (198mm x 475mm), 20.3" (514mm) diagonal
•Resolution
Landscape: 1920x800
Portrait: 800x1920
• Aspect Ratio
Landscape: 12:5
Portrait: 5:12
• Brightness: 250 cd/m2
• Contrast Ratio: 1000:1
• Color Depth: 16.7M colors
• Illumination: LED
• Touch Overlay: Projected capacitive, multi-touch support, 3 simultaneous max
• Horizontal: ± 89°
•Flash: 16 GB
• Maximum Project Size: 12 GB flash, available for apps and touch panel files
ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP
• USB: (2) USB host 2.0, Type A ports (1 with limited physical access requiring right angle connection):
Firmware upgrade, Touch Panel File Transfer, document and image viewing, HID Peripherals
• Near Field Communication (NFC): Supports standards ISO/IEC 15693, ISO/IEC 14443A, ISO/IEC 14443B;
Unique Identifier (UID), typ range=.25", max = .5"
• Bluetooth: Mouse/Keyboard: HID Profile v1.1, requires MXA-BT Bluetooth Adapter (FG5968-19)
MPEG-2-TS: MPEG-2 Main Profile@High Level up to 720p at 25 fps (decode only)
MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps (encode/decode)
MJPEG up to 720p at 25 fps (decode only)
• Supported Video Transport Streams: MPEG-TS for MPEG2 and H.264; HTTP for MJPEG
• Max Number of Active Video Streams: 2 (720dpi/30fps)
• Video Conferencing: Panel-to-panel and video chat*
• Speakers: 4 ohm, 2 Watt, 300 Hz cutoff frequency
• Supported Audio Codecs: MP2 Layer I and II, MP3 (8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz), AAC-LC (8 kHz, 96 kHz), G.711 with μLaw (VoIP* encode/decode at 8 kHz)
Suggested max packet size for G.711 Voice: 20ms
• File Formats: WAV, MP3 (as part of touch panel file only - no USB storage)
•Intercom*: Full Duplex VoIP, SIP v2.0
TPD5 Operations Guide for more information
• Viewer Applications*: PDF, JPEG, BMP, PNG, TIFF, GIF
• Remote Management: VNC Server
• Video Conferencing: Skype
• Audio Conferencing: Audio (Full Duplex Intercom*)
• Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness
• Proximity Detector: Max range = ~3', typ range = ~1', FOV = ~10 degrees
• Camera: HD 720p camera for video conferencing/video chat support
• LED Indicators: Camera active indicator
• Sleep Button: Sleep button to activate sleep mode and powering o ff. Also provides access to setup pages (can
be disabled)
15
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
MXD-2001-PAN Specif ications (Cont.)
CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector
•USB:
(2) USB host 2.0, Type A ports
(1) Micro-USB device port (currently not in use)
• Power: 2-pin, locking 3.5mm Phoenix connector
ENVIRONMENTAL • Temperature (Operating): 32°F to 104°F (0°C to 40°C)
• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
• On: 119.4 BTU/hr
• Standby: 23.9 BTU/hr
INCLUDED
ACCESSORIES
OPTIONAL
ACCESSORIES
* This feature will be available upon release of a future firmware update.
• Locking 2-pin Phoenix mate (41-0002-SA)
• MXA-USB-C, USB Port Cover Kit, Modero X Series Touch Panel (FG5968-18)
• MXA-CLK, Modero X Series Cleaning Kit (FG5968-16)
• Installation Template 20.3" (68-5968-01)
• MXA-RMK-20 Modero X Series Rack Mount Kit (FG5969-60)
• MXA-FMK-20 Flush Mount Kit for 20.3" Modero X Series Wall Mount Touch Panels (FG5968-68)
• PSR4.4 Power Supply, 4.5A, 3.5mm Phoenix with Retention Screws (FG423-46)
• PSN4.4 Power Supply, 4.5A, 3.5mm Phoenix, 13.5V (discontinued) (FG423-45)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
• CB-MXP19/20, Rough-In Box (FG039-15)
• MXA-BT, Bluetooth USB Adapter for Modero X/S Series (FG5968-19)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-USB-C, USB Port Covers for the Modero X Series Touch Panels (FG5968-18)
MXT/D-2001-PAN - 20.3" X Series G5 Panels
MXT/D-1901-PAN - 19.4" X Series G5 Panels
16
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
Sleep Button
NFC Sensor
USB Ports (2)
Cable Slot
MXT/D-1901-PAN - 19.4" X Series G5 Panels
MXT-1901-PAN (Tabletop)
FIG. 8 MXT-1901-PAN touch panel
MXT-1901-PAN Specif ications
MXT-1901-PAN Specifications
DIMENSIONS (HWD) 7" x 20 3/8" x 5 5/16" (177mm x 519mm x 135mm)
WEIGHT 9.5 lbs (4.31 Kg)
POWER CONSUMPTION • Full-On: 35W (13.5V , 2.6A)
• Standby: 7W (13.5V , 0.52A)
EXTERNAL POWER
SUPPLY REQUIRED
CERTIFICATIONS • FCC Part 15 Class B
TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS)
VIEWING ANGLE • Vertical: ± 89°
MEMORY • SDRAM: 2 GB
Requires one of these AMX power sources (not included):
• PSR4.4 Power Supply, 4.5A, 3.5mm Phoenix with Retention Screws (FG423-46)
• PSN4.4 Power Supply, 4.5A, 3.5mm Phoenix, 13.5V (discontinued) (FG423-45)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
• C-Tick CISPR 22 Class B
• CE EN 55022 Class B and EN 55024
• CB Scheme IEC 60950-1
•IC
• IEC/EN-60950
•UL 60950-1
•RoHS/WEEE compliant
• Display Size (WH): Landscape 20.4" x 6.9" (519mm x 175mm), 20.4" (518mm) diagonal
• Viewable Area (WH): Landscape 18.7" x 5.9" (475mm x 151mm), 19.4" (493mm) diagonal
• Resolution: Landscape 1920x530
• Aspect Ratio: Landscape 18:5
• Brightness: 350 cd/m2
• Contrast Ratio: 1000:1
• Color Depth: 16.7M colors
• Illumination: LED
• Touch Overlay: Projected capacitive, multi-touch support, 3 simultaneous max
• Horizontal: ± 89°
•Flash: 16 GB
• Maximum Project Size: 12 GB flash, available for apps and touch panel files
MXT/D-1901-PAN - 19.4" X Series G5 Panels
17
Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual
MXT-1901-PAN Specifications (Cont.)
COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP,
VIDEO • Supported Video Codecs:
AUDIO • Microphone: -42 dB ±3 dB sensitivity FET microphone
GRAPHICS ENGINE AMX G5: G5 enhanced feature set supporting multi-touch and gestures, scrolling, transitions, applications -
EMBEDDED
APPLICATIONS
FRONT PANEL
COMPONENTS
CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector
ENVIRONMENTAL • Temperature (Operating): 32°F to 104°F (0°C to 40°C)
INCLUDED
ACCESSORIES
OPTIONAL
ACCESSORIES
* This feature will be available upon release of a future firmware update.
ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP
• USB: USB: (3) USB host 2.0, Type A ports: Firmware upgrade, Touch Panel File Transfer, document and
image viewing, HID Peripherals
• Near Field Communication (NFC): Supports standards ISO/IEC 15693, ISO/IEC 14443A, ISO/IEC 14443B;
Unique Identifier (UID), typ range=.25", max = .5"
• Bluetooth: Mouse/Keyboard: HID Profile v1.1, requires MXA-BT Bluetooth Adapter (FG5968-19)
MPEG2-TS: MPEG-2 Main Profile @High Level up to 720p at 25 fps (decode only)
MPEG-2-TS: H.264 High Profile @Layer 4, AAC-LC up to 720p at 25 fps (encode/decode)
MJPEG up to 720p at 25 fps (decode only)
• Supported Video Transport Streams: MPEG-TS for MPEG-2 and H.264, HTTP for MJPEG
• Max Number of Active Video Streams: 2 (720dpi/30fps)
• Video Conferencing: Panel-to-panel and video chat*
• Speakers: 4 ohm, 2 Watt, 300 Hz cutoff frequency
• Supported Audio Codecs: MP2 Layer I and II, MP3 (8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz), AAC-LC (8 kHz, 96 kHz), G.711 with μLaw (VoIP* encode/decode at 8 kHz)
Suggested max packet size for G.711 Voice: 20ms
• File Formats: WAV, MP3 (as part of touch panel file only - no USB storage)
•Intercom*: Full Duplex VoIP, SIP v2.0
See TPD5 Operations Guide for more information
• Viewer Applications*: PDF, JPEG, BMP, PNG, TIFF, GIF
• Remote Management: VNC Server
• Video Conferencing: Skype
• Conferencing: Audio (Full Duplex Intercom*)
• Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness
• Proximity Detector: Max range = ~3', typ range = ~1', FOV = ~10 degrees
• Camera: HD 720p camera for video conferencing/video chat support
• LED Indicators: Camera active indicator
• Sleep Button: Sleep button to activate sleep mode and powering o ff. Also provides access to setup pages
(can be disabled)
•USB:
(3) USB host 2.0, Type A ports
(1) Micro-USB device port (currently not in use)
• Power: 2-pin, locking 3.5mm Phoenix connector
• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
On: 119.4 BTU/hr
Standby: 23.9 BTU/hr
• Locking 2-pin Phoenix mate (41-0002-SA)
• MXA-USB-C, USB Port Cover Kit, Modero X/S Series Touch Panel (FG5968-18)
• HPG-10-10K, 3/4" Mini-Grommet (FG570-01)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-STMK-19, Secure Table Mount Kit, 19.4" Modero X Tabletop (FG5968-65)
• PSR4.4 Power Supply, 4.5A, 3.5mm Phoenix with Retention Screws (FG423-46)
• PSN4.4 Power Supply, 4.5A, 3.5mm Phoenix, 13.5V (discontinued) (FG423-45)
• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)
• MXA-MP Modero X/S Series Multi Preview (FG5968-20)
• HPG-10-10K, 3/4" Mini-Grommet, 10-Pack (FG570-01-10K)
• MXA-BT, Bluetooth USB Adapter for Modero X/S Series (FG5968-19)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• MXA-USB-C, USB Port Covers for the Modero X/S Series Touch Panels (FG5968-18)
Loading...