AMX ENC4, RDA-ENC2, ENC6 User Manual
Installation Guide
RDA-ENC2/ENC4/ENC6
Overview
The AMX Lighting™ RDA-ENC2 (FG606-10), RDA-ENC4 (FG606-11), and
RDA-ENC6 (FG606-12) enclosures provide secure mounting for all Radia
controllers/modules. The enclosures are CE, UL, and C-UL approved.
RDA-ENC2 RDA-ENC4
Side View
(for all enclosures)
12.0"
(304.8 mm)
6.0"
(152.4 mm)
12.0"
(304.8 mm)
Installation Instructions
• For indoor use only.
• Mount on vertical surface only.
• Maintain 12" (304.88 mm) minimum clearance above and below the enclosure.
• Route class 1 conductors through upper conduit knockouts.
• Route class 2 conductors through lower conduit knockouts.
• Use 75°C (167°F) copper conductors only.
• Install filler plate #28-10500 (RDA-EFP) in all unused openings.
• Install only UL approved modules (see the UL Number Cross Reference to
AMX Lighting ID table).
Enclosure Weights
• RDA-ENC2: 4.5 lb. (2.04 kg)
• RDA-ENC4: 7.5 lb. (3.40 kg)
• RDA-ENC6: 9.5 lb. (4.31 kg)
Radia enclosures must be mounted on a vertical surface with a minimum of 12"
(304.8 mm) clearance above and below the enclosure.
Configuration for
right and left
mounting brackets
for all Ra dia
enclosures.
Maximum mounting
screw size: #12
To p s l ot
Bottom slot
A to B
B to C
RDA-ENC6
18.0"
(457.2 mm)
FIG. 1 Top, front, bottom, and side views of the RDA enclosures
0.75" (19.05 mm)
6.0" (152.4 mm)
FIG. 2 Bracket configuration
Dimensions between center lines (from FIG. 2):
RDA-ENC2:
• A to B = 5.25" (133.4 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC4:
• A to B = 10.0" (254.0 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC6:
• A to B = 16.0" (406.4 mm)
• B to C = 11.0" (279.4 mm)
UL Number Cross Reference to AMX Lighting ID
The following table provides a cross reference between the UL ID module
numbers and AMX Lighting module IDs. The modules identified are the only
modules that can be used in the RDA-ENC2, RDA-ENC4, and RDA-ENC6
enclosures.
UL Number Cross Reference to AMX Lighting ID
UL ID AMX ID
10-28400 RDM-DC, RDM-2DC, RDM-3DC
10-28410 RDM-FDB, RDM-2FDB, RDM-3FDB
28-10100 RDC-DC/120
28-10110 RDC-DC/240
28-10120 RDC-DC/277
28-10130 RDC-PDC/120
28-10133 RDC-PDC/240
28-10140 RDD-DM6/120
28-10150 RDD-DM6/240
28-10160 RDD-DM6/277
28-10170 RDA-PSM/120
28-10200 RDM-INC
28-10210 RDM-2INC
28-10220 RDM-INC50
28-10230 RDM-ZC, RDM-2ZC, RDM-PR, RDM-2PR
28-10240 RDM-ZC50
28-10260 RDM-SWM, RDM-2SWM, RDM-3SWM
28-10270 RDM-HSW, RDM-2HSW, RDM-3HSW
28-10280 RDM-MR, RDM-2MR, RDM-3MR
28-10290 RDM-MR35
28-10300 RDM-MR60
28-10310 RDM-MDM
28-10340 RDA-CHK
28-10350 RDM-HFDB
28-10360 RDM-DPSM
28-10370 RDM-HDC
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
AMX reserves the right to alter specifications without notice at any time.
11/08
93-0606-12 REV: A
Loading...