AMX RADIA DIMMER ENCLOSURES WITH BREAKERS User Manual

Installation Sheet

RDA-ENC6B and ENC12B Dimmer Enclosures w/Breakers

The RDA-ENC6B (FG606-13) and RDA-ENC12B (FG606-14) enclosures
provide secure mounting for all AMX Lighting and PROlink controllers, and
lighting modules. The enclosures also contain circuit breakers.

0.75"

(19.05 mm)

6.0"

(152.4 mm)

RDA-ENC12B

Top, side, and bottom
views are the same for
both enclosures.

RDA-ENC6B

24.0"

(610 mm)

TOP VIEW

SIDE VIEW

18.0"

(457.2 mm)

24.0"

(610 mm)

These enclosures are CE, UL, and C-UL approved. They include circuit
breakers and terminals for multi-phase wiring. They also provide 18
knockouts for 1/2", 3/4", and 1" conduits.

RDA-ENC6B Configurations:

- ENC6B/120 20 A Breakers

- ENC6B/240 10 A Breakers

RDA-ENC12B Configurations:

- ENC12B/120 20 A Breakers

- ENC12B/240 10 A Breakers

RDK Configurations:

- RDK-ENC6B with 1 RDC-PDC

- RDK-ENC12B/240 2 RDC-PDC

Sample RDK-ENC12B kit
shown with 2 RDC-PDC

Note:

LINE INPUTS: 140 A MAX PER ENCLOSURE

Use 75° C copper conductors only.
Torque terminals to 44 in-lbs.

BOTTOM VIEW

FIG. 1

Top, front, bottom, and side views of the RDA-ENC6B and RDA-ENC12B enclosures

Installation Instructions:

• For indoor use only.

• Mount on vertical surface only.

• Maintain 12" (304.88 mm) minimum clearance above and below the
enclosure.

• Route class 1 conductors through upper conduit knockouts.

• Route class 2 conductors through lower conduit knockouts.

• Use 75°C (167°F) copper conductors only.

• Install filler plate #28-10500 (RDA-EFP) in all unused openings.

• Install only UL approved modules (see the UL Number Cross
Reference to AMX Lighting ID table on page 2).

Enclosure Weights:

• RDA-ENC6B: 16.5 lbs. (7.48 kg)

• RDA-ENC12B: 17.5 lbs. (7.94 kg)

Dimensions between center lines (from FIG. 2):

RDA-ENC6B:

• A to B = 16.0" (406.4 mm)

• B to C = 22.88" (581.2 mm)

RDA-ENC12B:

• A to B = 16.0" (406.4 mm)

• B to C = 22.88" (581.2 mm)

Radia enclosures must be mounted on a vertical surface with a minimum of
12" (304.8 mm) clearance above and below the enclosure.

Configuration for
right and left
mounting brackets
for all Radia
enclosures.

Maximum mounting
screw size: #12

Bracket configuration

FIG. 2

Top s l o t

Bottom slot

A to B

B to C

Specifications

• Maximum input wire #1/0 AWG (50mm²)

• Maximum line input is 140 A (per enclosure )

• Torque input wire to 44 in-lbs. (5.0 N/m)

• Wire stripping length: 0.67 inches (17 mm)

• Input 1 feeds channels 1, 4, 7, and 10

• Input 2a feeds channels 5 and 11

• Input 2b feeds channels 2 and 8

• Input 3 feeds channels 3, 6, 9, and 12

• Breakers are UL 489 listed 10,000 AIC, 100% Switching Duty,
Hydraulic-Magnetic

The following section cross references the UL ID module numbers and
AMX Lighting module IDs.

The modules identified are the only ones that can be used in the RDA­ENC6B and RDA-ENC12B enclosures.

UL Number Cross Reference to AMX Lighting ID

UL ID AMX ID UL ID AMX ID UL ID AMX ID

28-10100 RDC-DC/120 28-10200 RDM-INC 28-10300 RDM-MR60

28-10110 RDC-DC/240 28-10210 RDM-2INC 28-10310 RDM-MDM

28-10120 RDC-DC/277 28-10220 RDM-INC50 28-10340 RDA-CHK

28-10130 RDC-PDC/120 28-10230 RDM-ZC,

28-10133 RDC-PDC/240 28-10240 RDM-ZC50 28-10360 RDM-DPSM

RDM-2ZC

28-10350 RDM-FDB

RDM-2FDB
RDM-3FDB
RDM-HFDB

Lighting Application Drawings

UL Number Cross Reference to AMX Lighting ID (Cont.)

UL ID AMX ID UL ID AMX ID UL ID AMX ID

28-10140 RDD-DM6/120 28-10260 RDM-SWM,

28-10150 RDD-DM6/240 28-10270 RDM-HSW,

28-10160 RDD-DM6/277

28-10170 RDA-PSM/120

RDM-2SWM,
RDM-3SWM

RDM-2HSW,
RDM-3HSW

28-10370 RDM-DC,

RDM-2DC,
RDM-3DC
RDM-HDC

Note:

LINE INPUTS: 140 A MAX PER ENCLOSURE

Use 75° C copper conductors only.
Torque terminals to 44 in-lbs.

FIG. 3 ENC6B and ENC12B Power Distribution

FIG. 4 ENC6B and ENC12B Input Terminal Block Wiring

AMX Corporation reserves the right to alter specifications without notice at any time.

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax [phone] • technical support 800.932.6993 • www.amx.com

043-019-2246 6/04 ©2002 AMX Corporat ion. All rights reserved.

93-0606-13

REV: A