AMX RADIA DIMMER ENCLOSURES User Manual
Dimmer Enclosures RDA-ENC2, RDA-ENC4, and RDA-ENC6
The AMX Lighting™ RDA-ENC2, RDA-ENC4, and RDA-ENC6 enclosures
provide secure mounting for all Radia controllers/modules. The enclosures
are CE, UL, and C-UL approved.
RDA-ENC2
6.0"
(152.4 mm)
RDA-ENC4
12.0"
(304.8 mm)
To p V i e w
Internal View
RDA-ENC6
18.0"
(457.2 mm)
Installation Sheet
0.75"
(19.05 mm)
6.0"
(152.4 mm)
Side View
(for all enclosures)
12.0"
(304.8 mm)
Bottom View
FIG. 1 Top, front, bottom, and side views of the RDA enclosures
Installation Instructions:
• For indoor use only.
• Mount on vertical surface only.
• Maintain 12" (304.88 mm) minimum clearance above and below the
enclosure.
• Route class 1 conductors through upper conduit knockouts.
• Route class 2 conductors through lower conduit knockouts.
• Use 75°C (167°F) copper conductors only.
• Install filler plate #28-10500 (RDA-EFP) in all unused openings.
• Install only UL approved modules (see the UL Number Cross Reference to AMX Lighting ID table).
Enclosure Weights:
• RDA-ENC2: 4.5 lb. (2.04 kg)
• RDA-ENC4: 7.5 lb. (3.40 kg)
• RDA-ENC6: 9.5 lb. (4.31 kg)
Radia enclosures must be mounted on a vertical surface with a minimum of
12" (304.8 mm) clearance above and below the enclosure.
Configuration for
right and left
mounting brackets
for all Radia
enclosures.
Maximum mounting
screw size: #12
To p s l o t
Bottom slot
A to B
B to C
Dimensions between center lines (from FIG. 2):
RDA-ENC2:
• A to B = 5.25" (133.4 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC4:
• A to B = 10.0" (254.0 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC6:
• A to B = 16.0" (406.4 mm)
• B to C = 11.0" (279.4 mm)
FIG. 2 Bracket configuration
The following section provides a cross reference between the UL ID module numbers and AMX Lighting module IDs. The modules identified are
the only modules that can be used in the RDA-ENC2, RDA-ENC4, and
RDA-ENC6 enclosures.
UL Number Cross Reference to AMX Lighting ID
UL ID AMX ID UL ID AMX ID UL ID AMX ID
28-10100 RDC-DC/120 28-10150 RDD-DM6/240 28-10230 RDM-ZC,
28-10300 RDM-MR60 28-10110 RDC-DC/240 28-10160 RDD-DM6/277
28-10240 RDM-ZC50 28-10310 RDM-MDM 28-10120 RDC-DC/277
28-10170 RDA-PSM/120 28-10260 RDM-SWM,
28-10130 RDC-PDC/
28-10350 RDM-HFDB 10-28410 RDM-FDB,
28-10210 RDM-2INC 28-10280 RDM-MR,
28-10140 RDD-DM6/
28-10370 RDM-HDC 10-28400 RDM-DC,
120
120
28-10200 RDM-INC 28-10270 RDM-HSW,
28-10220 RDM-INC50 28-10290 RDM-MR35
RDM-2SWM,
RDM-3SWM
RDM-2FDB,
RDM-3FDB
RDM-2MR,
RDM-3MR
RDM-2DC,
RDM-3DC
28-10340 RDA-CHK
28-10133 RDC-PDC/240
28-10360 RDM-DPSM
RDM-2ZC,
RDM-PR,
RDM-2PR
RDM-2HSW,
RDM-3HSW
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
The AMX logo is a trademark of AMX Corporation. AMX Corporation r eserves the right to alter specifications without notice at any time.
3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800. 932.6993
043-019-2245 8/01 ©2001 AMX Corporation. All rights reserved.
Loading...