AMX PTM-D15 User Manual

Product Catalog

MODERO TOUCH

PANELS

Modero
Touch Panels

THE AWARD-WINNING MODERO LINE OF TOUCH PANELS

17" MODERO WIDESCREEN TOUCH PANELS

People noticed long ago that the evolution of technology progresses in leaps. In 2002, the world witnessed the future of control
and automation with the introduction of the new Modero Touch Panels from AMX. It began with our award- winning 12" and 15"
Moderos, which debuted at CEDIA EXPO 2002, and culminated with the 17" Modero Widescreen, presented at InfoComm 2003.
In size or power, nothing compares to Modero – “the controlling force."

NXT-CV17

17" Table Top Color Video
Touch Panel

FG2257K

An exciting addition to our award-winning line of Modero Touch Panels, the
17" NXT-CV17 and NXD-CV17 Widescreen panels offer additional on-screen
real estate, providing the largest viewable area available in the marketplace
today. Table Top and Flush versions fit any integrated environment and provide
an amazing level of simplicity, convenience and luxury. The 17" Modero
includes AMX’s industry-leading G4 Graphics Engine that boasts an abundant
feature set including: G4 Computer Control, dynamic images, icons and
animated buttons.

AV FEATURES

• Video: Displays NTSC/PAL/SECAM video in variable-size video

windows with support for 16x9 and 4x3 aspect ratios

• Audio: Built-in stereo speakers

- Headphone connector for external speaker / headphone support

• NXA-AVB Breakout Box (included)

- Provides video/audio distribution over CAT-5 cable (up to 200 feet)

- Accepts either Composite or S-Video with Cable Adapter

STANDARD FEATURES

DISPLAY:

• 17" TFT active-matrix LCD

• Resolution: 1280x768 pixels

• Ultra-wide 170° viewing angle (both horizontal and vertical)

• Dot pixel pitch: 0.289 mm

• Color Depth: 16 million (24-bit color depth) with 256 (8-bit) Alpha

Channel Blending

• Contrast Ratio: 600:1

• Brightness: 450 cd/m

• Power: 3.67 Amps @ 13.5 VDC

MEMORY:

• 256MB Extended Memory Module

• 128MB Compact Flash factory programmed with demo pages (upgradeable to 1GB)

LIGHT SENSOR:

• Photosensitive light detector for automatic adjustment of the panel brightness

MOTION SENSOR (PIR):

• Proximity Infrared Detector to wake the panel when the panel is approached

SLEEP BUTTON:

• Pushbutton (grey) used to either put the panel into a "sleep" or "wake" state

and/or access the Setup and Calibration pages

SPEAKERS:

• Frequency response 450 Hz - 7 KHz

MICROPHONE:

• Balanced omni-directional with gain adjust

MODERO TABLE TOP CABLE:

• Combines A/V, Networking & Power into a single jacketed cable

(Included with all NXT Panels)

For more information about AMX products and services visit www.amx.com
11-03

2

NXD-CV17

17" Flush Mount Color Video
Touch Panel

FG2256K

CONNECTORS

• Location: NXT-CV17 Table Top located on back

NXD-CV17 Flush Mount located on the left side

• PCMCIA Card Slot: Provides optional wireless connectivity using

NXA-WC80211b network card

• Headphone Connector: Stereo output through a 3.5 mm mini-jack

• Audio/Video Connector: RJ-45 connector cable for Audio/Video signals sent

from the NXA-AVB Breakout Box

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication with LEDs

that show Link and Activity

• ICSNet Connector: RJ-45 connection for ICSNet interface

• Power: 2-pin mini-phoenix connector

OPTIONAL ACCESSORIES

• PSN6.5 Power Supply (13.5 VDC)

• CB-TP17 Conduit Wall box (17" Flush Mount Touch Panel)

• NXA-RK17 Rack mount kit for 17" Flush Mount Touch Panel

• Upgrade Compact Flash (factory programmed with firmware):

- NXA-CFTP256M - 256MB compact flash card

- NXA-CFTP512M - 512MB compact flash card

- NXA-CFTP1G - 1GB compact flash card

• NXA-WC80211b: 802.11b wireless interface card

• NXA-BASE/B: Wireless base for Table Top Touch Panel (NXT version only)

• NXT-BP: Battery pack for Table Top Wireless Base provides 3 hours of

continuous operation

• NXT-CHG: Battery charger for NXT-BP batteries. Charges batteries in 4 hours.

MECHANICAL FEATURES

FG2257K NXT-CV17 17" Table Top Touch Panel

• Dimensions: 13.29" x 18.84" x 12.44" (33.76 cm x 45.31 cm x 31.6 cm)

• Fully lowered height: 6.23" (15.82 cm)

• Weight: 17.25 lbs (7.82 kg)

• Enclosure: ABS Polycarbonate enclosure in black matte finish with

platinum color trim ring

FG2256K NXD-CV17 17" Flush Mount Touch Panel

• Dimensions Faceplate included: 14.44" x 18.09" x 3.31"

• Weight: 15.5 lbs (7.03 kg)

• Enclosure: Metal enclosure with ABS Polycarbonate front bezel in black matte

finish with platinum color trim

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

(36.68 cm x 45.95 cm x 8.42 cm)

15" MODERO TOUCH PANELS

The award-winning 15" Modero Touch Panels have taken the control industry by storm. Recognized as “the controlling force,"
the 15" Modero boasts features that remain unprecedented and unrivaled: A bright, easy-to-view display. Extremely sharp images.
A rich 16-million color palette. Innovative 8-bit transparency. Amazing G4 graphics. An anti-glare touch overlay. An ultra-wide
170° viewing angle. A convenient, effortless tilt feature. And convenient wireless capability with a full range of wireless accessories.

NXT-CV15

15" Table Top Video Touch Panel

FG2252-11K

NXT-CA15

15" Table Top Touch Panel

FG2252

The 15" Modero Touch Panel, a 2003 CES Innovations Showcase Winner, set
the standard by which all Touch Panels are judged. Table Top and Flush Mount
versions fit any environment and provide an amazing level of simplicity,
convenience and luxury. The 15" Modero Touch Panel includes AMX’s
industry- leading G4 Graphics Engine boasting an abundant feature set
including: Computer Control, dynamic images, icons and animated buttons.

MODELS

NXT-CV15 – 15" Table Top Touch Panel with Video Support
NXD-CV15 – 15" Flush Mount Touch Panel with Video Support
NXT-CA15 – 15" Table Top Touch Panel
NXD-CA15 – 15" Flush Mount Touch Panel

COLOR VIDEO PANEL FEATURES

• Video: Displays NTSC/PAL/SECAM video in variable-size video window

• NXA-AVB Breakout Box

STANDARD FEATURES – COLOR ACTIVE AND COLOR VIDEO PANELS

LCD:

• 15" TFT active-matrix LCD

• Resolution: 1024x768 pixels

• Ultra-wide 170° viewing angle (combining horizontal and vertical axis)

• Dot pixel pitch: 0.297 mm

• 16 million (24-bit color depth) with 256 (8-bit) Alpha Channel Blending

• Contrast Ratio: 300:1

• Brightness: 400 cd/m2

• Power: 3.5 Amps @ 13.5 VDC

MEMORY:

• 64MB Extended Memory Module (upgradeable)

• 64MB Compact Flash factory programmed with demo pages (upgradeable)

LIGHT SENSOR:

• Photosensitive light detector for automatic adjustment of the panel brightness

MOTION SENSOR (PIR):

• Proximity Infrared Detector to wake the panel when the panel is approached

SLEEP BUTTON:

• Pushbutton (grey) used to either put the panel into a "sleep" or "wake" state

and/or access the Setup and Calibration pages

AUDIO:

• Built-in stereo speakers with a frequency response 450 Hz - 7 KHz plus

headphone connector for external Speaker / Headphone support

MICROPHONE:

• Balanced omni-directional with gain adjust

MODERO TABLE TOP CABLE:

• Combines A/V, Networking & Power in a cable (Included with all NXT Panels)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

NXD-CV15

15" Flush Mount Video Touch Panel

FG2253-12K

NXD-CA15

15" Flush Mount Touch Panel

FG2253-10

For more information about AMX products and services visit www.amx.com

11-03

12" MODERO TOUCH PANELS

The 12" Modero Touch Panels have enjoyed enormous success in the marketplace by offering a set of innovative features. At a
price comparable to our previous generation of 10.4" panels, the 12" Modero remains one of our most popular to date.

NXT-CV12

12" Table Top Video Touch Panel

FG2250-11K

NXT-CA12

12" Table Top Touch Panel

FG2250

The 12" Modero Touch Panel delivers AMX performance and styling. Table Top
and Flush Mount versions fit any environment and provide an amazing level
of simplicity, convenience and luxury. The 12" Modero Touch Panel includes
AMX’s industry-leading G4 Graphics Engine that boasts an abundant feature set
including: Computer Control, dynamic images, icons and animated buttons.

MODELS

NXT-CV12 – 12" Table Top Touch Panel with Video Support
NXD-CV12 – 12" Flush Mount Touch Panel with Video Support
NXT-CA12 – 12" Table Top Touch Panel
NXD-CA12 – 12" Flush Mount Touch Panel

COLOR VIDEO PANEL FEATURES

• Video: Displays NTSC/PAL/SECAM video in variable-size video window

• NXA-AVB Breakout Box

STANDARD FEATURES - COLOR ACTIVE AND COLOR VIDEO PANELS

LCD:

• 12" TFT active-matrix LCD

• Resolution: 800x600 pixels

• Ultra-wide 160° viewing angle (combining horizontal and vertical axis)

• Dot pixel pitch: 0.297 mm

• 256K (18-bit color depth) with 256 (8-bit) Alpha Channel Blending

• Contrast Ratio: 300:1

• Brightness: 250 cd/m2

• Power: 2.0 Amps @ 13.5 VDC

MEMORY:

• 64MB Extended Memory Module (upgradeable to 256MB)

• 64MB Compact Flash factory programmed with panel demo pages

LIGHT SENSOR:

• Photosensitive light detector for automatic adjustment of the panel brightness

MOTION SENSOR (PIR):

• Proximity Infrared Detector to wake the panel when the panel is approached

SLEEP BUTTON:

• Pushbutton (grey) used to either put the panel into a "sleep" or "wake" state

and/or access the Setup and Calibration pages

AUDIO:

• Built-in stereo speakers with a frequency response 450 Hz - 7 KHz plus

headphone connector for external Speaker / Headphone support

MICROPHONE:

• Balanced omni-directional with gain adjust

MODERO TABLE TOP CABLE:

• Combines A/V, Networking & Power into a single jacketed cable

(Included with all NXT Panels)

For more information about AMX products and services visit www.amx.com
11-03

NXD-CV12

12" Flush Mount Video Touch Panel

FG2251-12K

NXD-CA12

12" Flush Mount Touch Panel

FG2251-10

CONNECTORS

• Location: NXT-CV12 & NXT-CA12 Table Tops located on back NXT-CV12 &

NXD-CV12 Flush Mounts located on the left side

• PCMCIA Card Slot: Provides optional wireless connectivity using

NXA-WC80211b network card

• Headphone Connector: Stereo output through a 3.5 mm mini-jack

• Audio/Video Connector: RJ-45 connector cable for Audio/Video signals sent from

the NXA-AVB Breakout Box (Video Support available ONLY on CV models)

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication with LEDs that

show Link and Activity

• ICSNet Connector: RJ-45 connection for ICSNet interface

• Power: 2-pin Connector (Male)

OPTIONAL ACCESSORIES

• PSN6.5 Power Supply (13.5 VDC)

• CB-TP12 Conduit Wall box (12" Flush Mount Touch Panels)

• NXA-RK12 Rack mount kit for 12" Flush Mount Touch Panels

• Upgrade SDRAM

- NXA-EXM128M – 128MB memory card

- NXA-EXM256M – 256 MB memory card

• Upgrade Compact Flash (factory programmed with firmware):

- NXA-CFTP128M - 128MB compact flash card

- NXA-CFTP256M - 256MB compact flash card

- NXA-CFTP512M - 512MB compact flash card

- NXA-CFTP1G - 1GB compact flash card

• NXA-WC80211b: 802.11b wireless interface card

• NXA-BASE/B: Wireless base for Table Top Touch Panel (NXT only)

• NXT-BP: Battery pack for Table Top provides 4 hours of continuous operation

(NXT versions only)

• NXT-CHG: Battery charger for NXT-BP batteries. Charges batteries in 4 hours

(NXT versions only)

MECHANICAL FEATURES

NXT-CV12

12" Table Top Color Video Touch Panel FG2250-11K

NXT-CA12

12" Table Top Color Active Touch Panel FG2250

• Dimensions: 10.91" x 12.34" x 12.50" (27.70 cm x 31.33 cm x 31.75 cm)

• Fully lowered height: 6.77" (17.20 cm)

• Weight: 11.85 lbs (5.38 kg)

• Enclosure: ABS Polycarbonate enclosure in black matte finish with platinum

color trim ring

NXD-CV12

12" Flush Mount Color Video Touch Panel FG2251-12K

NXD-CA12

12" Flush Mount Color Active Touch Panel FG2251-10

• Dimensions Faceplate included: 12.38" x 12.59" x 3.25"

(31.43 cm x 31.97 cm x 8.25 cm)

• CB-TP12 Conduit / Wallbox: 11.52" x 11.60" x 3.50"

(29.27 cm x 29.47 cm x 8.89 cm)

• Weight: 11.29 lbs (5.40 kg)

• Enclosure: Metal enclosure with ABS Polycarbonate front bezel in black matte

finish with platinum color trim

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

7" MODERO WIDESCREEN TOUCH PANEL

Wider is better – and now the popular Modero Widescreen is available in a compact 7" model. If you desire extra on-screen real
estate but your needs call for a smaller panel, the 7" Modero Widescreen is the perfect fit for any integrated environment. The Wall
Mount version with it’s 7" wide screen provides more than enough space to display colorful and animated graphics and icons, to
watch multiple windows, and to control a variety of audio/video equipment.

NXT-CV7

7" Table Top Touch Panel

FG2258-01K

The 7" Modero Widescreen carries on the AMX tradition of providing
outstanding color, resolution, contrast and brightness. Utilizing color active
LCD technology and 800x480 resolution, your graphics and video appear
clearer and sharper than other panels this size. The 7" Modero Widescreen
showcases 18-bits per pixel of color depth, 350+cd/m2 peak brightness and a
200:1 contrast ratio. The 7" Modero Widescreen incorporates the latest G4
graphics features including Computer Control.

FEATURES

16x9 Widescreen high resolution color display
Latest G4 graphics user interface
Anti-glare touch screen
Wide viewing angles
Exclusive SmoothTilt™ operation
Freedom and convenience of wireless control
Multimedia video that supports various formats
Playback of MP3 and WAV audio files
Microphone and speakers for paging and intercom audio
The CV7 comes complete with the NXA-AVB to deliver composite / S-Video to the panel

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DISPLAY

• 7" Color active-matrix LCD 16x9 (800 x 480 pixel resolution)

• Brightness: 350+ cd/m2

• Contrast: 200:1

• Active Viewing Area: 6.00" x 3.60"

• Viewing Angle: 50° (top/bottom/left/right)

• Display colors: 256K (18-bit color depth)

MEMORY

• 64MB Extended Memory Module

• 64MB Compact Flash (upgradeable to 1 GB) factory programmed with panel

firmware

POWER

• 1.4 Amps @ 12.0 VDC (wired)

• 2.8 Amps @ 12.0 VDC (with battery base & charging)

OPTIONAL ACCESSORIES

• PSN4.4 Power Supply

• Upgrade Compact Flash (factory programmed with firmware):

- NXA-CFSP128M - 128MB compact flash card

- NXA-CFSP256M - 256MB compact flash card

- NXA-CFSP512M - 512MB compact flash card

- NXA-CFSP1G - 1GB compact flash card

• NXA-BASE/1: Includes 1 battery, Provides 4 hours continuous operation and 8

hours in normal operation (NXT version only)

• NXA-WC80211b/CF: 802.11b wireless interface Compact Flash card

• NXT-BP: Battery pack for Table Top Wireless Base:

Provides 4 hours of continual operation

NXD-CV7

7" Flush Mount Touch Panel

FG2258-02K

• NXT-CHG: Battery charger for NXT-BP batteries. Charges batteries in 8 hours.

Includes two batteries.

• NXA-RK7: Rackmount kit for 7" Wallmount Panels

• CB-TP7: Conduit Box for 7" Wallmount Panels

MECHANICAL FEATURES

NXT-CV7 Touch Panels (FG2258-01K)

7" Table Top Touch Panel

• Dimensions: (HWD) 6.864" x 7.932" x 7.462" (17.43 cm x 20.15 cm x 18.95 cm)

• Weight: 3.49 lbs (1.58 kg)

NXD-CV7 Touch Panels (FG2258-02K)

7" Flush Mount Touch Panel

• Dimensions: (HWD) 5.923" x 7.955" x 3.328" (15.04 cm x 20.21 cm x 8.45 cm)

• Weight: 1.85 lbs (0.839 kg)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

8.4" MODERO VIEWPOINT TOUCH PANELS

The 8.4" Modero ViewPoint (MVP-8400) is the ultimate user interface, incorporating wireless mobility, Table Top functionality, and
the flexibility to operate as a Wall/Flush Mount unit. The MVP-8400 also includes 1-way and 2-way communications capabilities
and standard 802.11b wireless technology. This MVP of control offers powerful and affordable Touch Panel solutions, achieving
one-touch automation without compromising the advanced control features that have become staples of AMX.

MVP-8400

8.4" Modero ViewPoint Touch Panel

FG5965-02

The MVP-8400 sets a new benchmark in wireless Touch Panel control,
providing maximum comfort and convenience. The popular, AMX-exclusive
SmoothTilt™, available on every Modero Touch Panel, enhances Table Top
convenience. With one hand, the MVP-8400 can be quietly and effortlessly
adjusted for the optimum viewing angle. The MVP-8400 continues to provide
the most innovative features on the market, including the ability to display
stunning G4 graphics and wireless multimedia. The MVP-8400 is just the right
size for any integrated environment. AMX now enables the end user and dealer
to choose from an expanded line of Modero Touch Panels, designed to meet
their specific needs today and into the future.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DISPLAY

• 8.4" Color active-matrix TFT

• (800 x 600 pixel resolution)

• Viewing Angle: + 120° (Left to Right)

• + 80° (Top to Bottom)

• Display colors: 256K (18-bit color depth)

• Brightness: 180 cd/m2

• Contrast: 350:1

• Anti-glare Overlay

• Aspect Ratio: 4x3

MEMORY

• 64MB RAM

• 64MB Compact Flash (upgradeable to 1GB)

POWER

• Operates with 2 MVP-BP battery packs

• 12 VDC Power Supply for recharging batteries

INTERFACES

• 802.11b Wireless Ethernet for 2-way network communications

• Mini-USB for programming file transfer

• Docking Station Interconnect

• Power Supply, coaxial barrel connector

FRONT PANEL

• Front Buttons: 9 programmable buttons

• Speakers: 2 internal

• Microphone: Used for intercom applications

INCLUDED ACCESSORIES

• Two MVP-BP

• PS4.4

• Stylus

OPTIONAL ACCESSORIES

• MVP-TDS, Table Top/Tilt Docking Station

• MVP-WDS, Wall/Flush Mount Docking Station

• MVP-KS, KickStand

• MVP-BP, Spare Battery Pack

• PS4.4, Power Supply

• MVP-STYLUS, Pack of 3 Stylus

• CB-MVPWDS, Wall/Flush Mount Docking Station Conduit Box

• CC-USB, Programming Cable

• NXA-CFSP128M, 128M Compact Flash

• NXA-CFSP256M, 256M Compact Flash

• NXA-CFSP512M, 512M Compact Flash

• NXA-CFSP1G, 1G Compact Flash

MECHANICAL FEATURES

• Dimensions (HWD): 7.165" x 10.474" x 1.205" (18.20 cm x 26.60 cm x 3.06 cm)

• Weight: 2.0 lbs (0.91 kg)

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

7.5" MODERO VIEWPOINT TOUCH PANELS

The 7.5" Modero ViewPoint (MVP-7500) is the ultimate user interface, incorporating wireless mobility, Table Top functionality, and
the flexibility to operate as a Wall/Flush Mount unit. The MVP-7500 also includes 1-way and 2-way communications capabilities
and standard 802.11b wireless technology. This MVP of control offers powerful and affordable Touch Panel solutions, achieving
one-touch automation without compromising the advanced control features that have become staples of AMX.

MVP-7500

7.5" Modero ViewPoint Touch Panel

FG5965-02

The MVP-7500 provides maximum comfort and convenience – the perfect size
for any integrated environment. The popular, AMX-exclusive SmoothTilt™,
available on every Modero Touch Panel, enhances Table Top convenience. With
one hand, the MVP-7500 can be quietly and effortlessly adjusted for the
optimum viewing angle. The MVP-7500 continues to provide the most
innovative features on the market, including the ability to display stunning G4
graphics. AMX now enables the end user and dealer to choose from an
expanded line of Modero Touch Panels, designed to meet their specific needs
today and into the future.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DISPLAY

• 7.5" Color passive-matrix

• (600 x 480 pixel resolution)

• Viewing Angle: + 80° (Top to Bottom)

• + 80° (Top to Bottom)

• Display colors: 4K (12-bit color depth)

• Brightness: 120 cd/m2

• Contrast: 20:1

• Anti-glare Overlay

• Aspect Ratio: 4 x 3

MEMORY

• 64MB RAM

• 64MB Compact Flash (upgradeable to 1GB)

POWER

• Operates with 1 or 2 MVP-BP battery packs

• 12-18 VDC Power Supply for recharging batteries

INTERFACES

• 802.11b Wireless Ethernet for 2-way network communications

• Mini-USB for programming file transfer

• Docking Station Interconnect

• Power Supply, coaxial barrel connector

FONT PANEL

• Front Buttons: 9 programmable buttons

INCLUDED ACCESSORIES

• One MVP-BP

• PS4.4

• Stylus

OPTIONAL ACCESSORIES

• MVP-TDS, Table Top/Tilt Docking Station

• MVP-WDS, Wall/Flush Mount Docking Station

• MVP-KS, KickStand

• MVP-BP, Spare Battery Pack

• MVP-STYLUS, Pack of 3 Stylus

• CB-MVPWDS, Conduit Box

• CC-USB, Programming Cable

• NXA-CFSP128M, 128M Compact Flash

• NXA-CFSP256M, 256M Compact Flash

• NXA-CFSP512M, 512M Compact Flash

• NXA-CFSP1G, 1G Compact Flash

MECHANICAL FEATURES

• Dimensions (HWD): 7.165" x 10.474" x 1.329" (18.20 cm x 26.60 cm x 3.37 cm)

• Weight: 2.0 lbs (0.91 kg)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

MODERO VIEWPOINT ACCESSORIES

MVP-TDS

MVP Table Top Docking Station

FG5965-10

Place the wireless MVP into the Table Top Docking Station and re-charge its
batteries while remaining in continuous control of your integrated technology.
The adjustable station creates just the right viewing angle for any situation.
Attach a keyboard and mouse using the docking station's USB ports - a great
feature for surfing the Web with the G4 Computer Control application.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• Fully raised: 7.40" x 7.01" x 9.83" (18.80 cm x 17.80 cm x 25.00 cm)

• Fully lowered height: 4.27" (10.80 cm)

WEIGHT

• 4.57 lbs. (2.07 kg)

FRONT PANEL FEATURES:

• Electromagnet to secure the MVP to the MVP-TDS

• Release Push button to disengage the electromagnet and remove the MVP from

the MVP-TDS

• Two LEDs (through Push button) to indicate battery-charging status and

MVP communications

REAR PANEL FEATURES:

• (Two) Type A USB ports, for keyboard and mouse

• Power supply jack, 13.5VDC, 6mm coaxial male

OPTIONAL ACCESSORIES:

• MVP-8400, 8.4" Modero ViewPoint Touch Panel

• MVP-7500, 7.5" Modero ViewPoint Touch Panel

• MVP-BP, Modero ViewPoint Battery Pack

• PS4.4, power supply with 6mm coaxial connector

MVP-WDS

MVP Wall/Flush Mount Docking Station

FG5965-11

Place the wireless MVP into the Wall/Flush Mount Docking Station and
re-charge its batteries while remaining in continuous control of your integrated
technology. Attach a keyboard and mouse using the docking station's USB
ports - a great feature for surfing the Web with the G4 Computer Control
application.

The MVP-WDS comes with a unique anti-theft locking mechanism. Keep your
MVP panels safe and secure by using the MVP-WDS security latch to maintain
a tight grip on your panel. Removing the panel is just as easy. With a push of
the button, the MVP glides forward for removal and transport. If security is
enabled, a user must enter a valid security code before the MVP is released.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• 8.62" x 12.70" x 2.99" (29.90 cm x 32.30 cm x 7.59 cm)

WEIGHT

• 4.17 lbs. (189 kg)

FRONT PANEL FEATURES:

• Rare earth magnet and security latch to secure the MVP to the MVP-WDS

• Release push button to remove the MVP from the MVP-WDS

• Two LEDs (through push button) to indicate battery-charging status and

MVP communications

REAR PANEL FEATURES:

• (Two) Type A USB ports, for keyboard and mouse

• Power supply jack, 13.5VDC, 6mm coaxial male

OPTIONAL ACCESSORIES:

• MVP-8400, 8.4" Modero ViewPoint Touch Panel

• MVP-7500, 7.5" Modero ViewPoint Touch Panel

• MVP-BP, Modero ViewPoint Battery Pack

• PSN4.4, power supply with 3.5mm phoenix-style connector

• CB-MVPWDS, Conduit box for MVP-WDS

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

MODERO VIEWPOINT ACCESSORIES

MVP-KS

MVP KickStand

FG5965-12

The MVP KickStand, MVP-KS, is compatible with both the MVP-7500 and
MVP-8400 Touch Panel. The MVP-KS allows the MVP to rest at an optimal
viewing angle on any flat level surface.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• 6.34" x 7.91" x 0.59" (16.10 cm x 20.10 cm x 1.50 cm)

WEIGHT

• 0.67 lbs. (0.30 kg)

MVP-BP

MVP Battery Pack

FG5965-20

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• 0.48" x 1.52" x 8.65" (1.23 cm x 3.86 cm x 21.97 cm)

WEIGHT

• 0.67 lbs. (0.30 kg)

POWER

• Lithium Ion Cells - 7.2 Volts, 3600 mAh

CC-USB

MVP/CV7 Programming Cable

FG10-5965

APPLICATION

• Connects a PC's USB port to the MVP-7500, MVP-8500 or CV7 Touch Panel

• Used to transfer firmware kit files, TPD4 Touch Panel files and IR files

MVP-STYLUS

Replacement MVP Stylus, pack of 3

FG5965-30

PS4.4

13.5 VDC, 4.4 Power Supply,
(regulated 110/220 VAC input)

FG423-44

APPLICATION

• DC power for MVP-7500, MVP-8400 and MVP-TDS

DC POWER OUTPUT

• 13.5 Volts DC, 4.4 Amps

• 6mm Coaxial barrel-style plug

• Switching regulated, overload protected

AC POWER INPUT

• 100-240 VAC

• 50-60 Hz

ENCLOSURE

• Molded black matte plastic

• international IEC cable socket

DIMENSIONS (HWD)

• 4.6" x 2.3" x 1.5" (117 mm x 58 mm x 35 mm)

WEIGHT

• 1 lb. (0.45 kg)

PSN4.4

13.5 VDC, 4.4 Power Supply,
(regulated 110/220 VAC input)

FG423-45

APPLICATION

• DC power for NetLinx systems, MVP-WDS and CV7 Touch Panel

DC POWER OUTPUT

• 13.5 Volts DC, 4.4 Amps

• 3.5 mm phoenix-style plug

• Switching regulated, overload protected

AC POWER INPUT

• 100-240 VAC

• 50-60 Hz

ENCLOSURE

• Molded black matte plastic

• international IEC cable socket

DIMENSIONS (HWD)

• 4.6" x 2.3" x 1.5" (117 mm x 58 mm x 35 mm)

WEIGHT

• 1 lb. (0.45 kg)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

MODERO TOUCH PANEL ACCESSORIES

NXA-AVB

Audio/Video Breakout Box

FG2254-01

The NXA-AVB Breakout Box comes
standard with the Modero Color Video
Touch Panels and is available as an

option for Modero Color Active Touch Panels. The Breakout Box transfers
audio/video signals from an outside source to and from the Modero Touch
Panel. It can also be used for pass-through power and ICSNet connections.

FEATURES

• Included with all Modero Color Video Touch Panels

• Provides video/audio distribution over CAT-5 cable (up to 200 feet)

• Accepts either Composite or S-Video signals

• Stereo audio support accepts balanced and unbalanced audio inputs:

line level stereo

• Provides balanced microphone output to A/V system

• Available as an option for audio distribution on Modero Color Active Touch Panels

CONNECTORS

• Power In: Power from Power Supply 2-pin connector (Male)

• ICSNet In: RJ-45 connection from ICSNet Hub or Master

• S-Video Chroma In: BNC jack for Chroma Input

• Composite / S-Video Luma In: BNS jack for Composite or Luma input

• Microphone Out: Microphone signal from the Touch Panel 4-pin connector (Male)

• Audio In: Audio signal to Touch Panel 6-pin connector (Male)

• Power Out: Power to Touch Panel 2-pin connector (Male)

• ICSNet Out: RJ-45 connection to Touch Panel

• Audio/Video Out: RJ-45 connection with A/V signals to Touch Panel

NXT-BP

Smart Batteries" for Modero

"

Touch Panels

FG2255-10

The NXT-BP Modero Power Pack is a “smart" Lithium-Ion battery
that is compatible with the Modero Battery Base. It is equipped with an onboard
battery status indicator, and also communicates its status to the Modero Touch
Panel via the Modero Battery Base. Two batteries are required for use with the
Battery Base. Charging the Lithium-Ion batteries is as easy as plugging in the
base. The batteries can be charged with either the Battery Base or an optional
Modero Power Station – a stand- alone quick charger.

FEATURES

• Onboard battery status indicator

• Provides 4+ hours of run time in continuous operation

• “Smart Battery" Lithium-Ion technology

CONNECTORS

• Battery Interface: 5-pin connector that interfaces with NXA-BASE/B battery

tray connector

For more information about AMX products and services visit www.amx.com
11-03

NXA-BASE/B

Battery Base Kit for Modero
Touch Panels

FG2255K

At less than two inches in height, the Modero Battery Base seamlessly attaches
to the base of the 12", 15" and 17" Modero Touch Panels, complementing their
award-winning design. From here, the Modero Touch Panel can provide up to
eight hours of normal operation. The interface connector transfers power from
the Battery Base, which houses two NXT-BP rechargeable Lithium-Ion “smart"
batteries and communicates battery status back to the panel. The NXA-BASE/B
requires the latest version of TPDesign4/(TPD4) to access the battery setup
pages on the Modero Touch Panel. The latest version of TPD4 can be
downloaded from the AMX website (www.amx.com).

FEATURES

• Comes complete with two NXT-BP batteries

• Seamlessly attaches to the base of the 12", 15" and 17"

Modero Touch Panels

CONNECTORS

• Battery Interface: 2 (5-pin) connectors in battery tray

• Modero Interface: 40-pin connector that provides power and status

information to the Modero Touch Panel

NXA-WC80211B

Wireless Network Interface Card
for 17", 15", 12" Modero Touch Panels

FG2252-02

NXA-WC80211b provides wireless network access for Modero Touch Panels.
By plugging it directly into the Modero’s PCMCIA Card Slot, you have the
ability to take control with your Modero panel from any location, throughout
any environment. Use the Wireless Interface Card with both the Table Top and
Flush Mount models. The wireless network interface card is IEEE802.11b
standard compatible and certified for operation in North America. The hardware
interface is PCMCIA Standard Release 2.0, Type II Extended (5.0mm) definition.
NXA-WC80211b will work with any wireless Access Point compatible with

802.11b wireless interface standard.

FEATURES

• Interoperable with Wi-Fi (WECA) certified Access Points

• Data rate 11, 5.5, 2, and 1 Mbps per channel, Auto Fall-Back

• 64-bit and 128-bit encryption

• Support IEEE 802.11b Protocol Standard

CONNECTORS

• PCMCIA: Interfaces to Modero PCMCIA slot

NXA-WC80211b/CF

Wireless 802.11b Compact Flash Card

FG2255-03

The 802.11 CompactFlash (CF) Card from AMX brings wireless convenience
and freedom to our exciting and popular line of award-winning Modero Touch
Panels. Now the end user can experience one-touch control from anywhere, at
any time with minimal effort and amazing results. This innovative wireless

802.11b CF card comes standard with the new Modero ViewPoint Touch Panels
(both the MVP-7500 and MVP-8400) and as an option for the new 7" Modero
Widescreen Touch Panel.

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

MODERO TOUCH PANEL ACCESSORIES

NXT-CHG

Quick Charger Kit for Modero
Touch Panels

FG2250K

For added convenience, the NXT-BP Power Pack
batteries can be quick-charged with the new

NXT-CHG Modero Power Station. The Power
Station is a two-slot, stand-alone unit that recharges up to two “smart"
batteries, using sequential charging and recalibration techniques. Through
sequential charging, the batteries placed in each slot are recharged one at a
time. Through recalibration, each battery can be completely discharged and
immediately recharged. This unique feature extends the life of each battery.
Recalibration also improves the accuracy of the battery charge reading located
on each battery, as well as feedback listed on the Modero Touch Panels on­screen Battery Base page. Instantly track the life of each battery in order to
determine the amount of time available for Touch Panel operation.

FEATURES

• Comes complete with two NXT-BP batteries

• Recharges a set of NXT-BP batteries in approximately 4 hours

CONNECTORS

• Power In: Power from Power Station’s Power Supply barrel connector.

• Battery Interface: 2 (5-pin) connectors one in each charging slot

NXA-CFTP128M

128MB Compact Flash Upgrade

FG2116-22

CB-TP17

Conduit Box for NXD-CV17

FG034-10

CB-TP15

Conduit Box for NXD-CV15
& NXD-CA15

FG032-10

The Conduit Wall Box is an optional accessory for the Modero Flush Mount
Modero Touch Panels. The Conduit Box allows the Modero to be mounted
directly to the studs/pre-wall and includes a wall box and mounting screws.

17" PRODUCT DIMENSIONS

• 13.55" x 17.07" x 3.49" (34.43 cm x 43.36 cm x 8.85 cm)

15" PRODUCT DIMENSIONS

• 13.48" x 14.18" x 3.49" (34.24 cm x 36.00 cm x 8.85 cm)

NXA-RK17

Rack Mount Kit for NXD-CV17 &
NXD-CA17

FG2904-52

NXA-RK15

Rack Mount Kit for NXD-CV15 &
NXD-CA15

FG2904-51

NXA-RK12

Rack Mount Kit for NXD-CV12 &
NXD-CA12

FG2904-50

NXA-CFTP256M

256MB Compact Flash Upgrade

FG2116-23

NXA-CFTP512M

512MB Compact Flash Upgrade

FG2116-24

NXA-CFTP1G

1G Compact Flash Upgrade

FG2116-25

NXA-EM128M

128MB SDRAM Upgrade

FG079-01

NXA-EM256M

256MB SDRAM Upgrade

FG079-02

The Rack Mount Kit is an optional accessory for Flush Mount Modero Touch
Panels. The kit allows the Modero to be mounted directly on an equipment rack
and includes a rack mount frame, screws and washers.

MB-TP17

VESA Mounting Kit for NXD-CV17

FG033-50

MB-TP15

VESA Mounting Kit for NXD-CV15

FG032-50

MB-TP12

VESA Mounting Kit for NXD-CV12

FG031-50

Kits enables installation of the wall mount version of the 17" (NXD-CV17), 15”
(NXD-CV15) and 12” ( NXD-CA12) Modero Touch Panels on any VESA(TM)­compliant mount to include pivots, arms, poles, under-cabinet mounts, etc. The
kit includes a metal back box with VESA 75 x 75 mm mounting pattern, plastic
back cover, and screws. Kit does not include support arm.

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

TOUCH PANEL INTERFACE 4

A key to leading AMX technology has been the amazing G4 (4th Generation Graphics) engine introduced on the Touch Panel
Interface 4. Unmatched G4 features are the gold standard for high-end user interface designs and capabilities.

NXP-TPI/4

NetLinx Touch Panel Interface 4

FG2275

Create a Touch Panel user interface that combines video and RGB media with
Touch Panel graphics. Locate the TPI/4 next to the media, which is typically in
the equipment rack – not in the conference room. Accept media from plug-in
cards, freely mixing video and RGB inputs as needed. Send the combined
graphics to a Touch Monitor on a table, lectern or wall. Pass mouse touch
control to the computer that’s displayed on the screen. Now you have one
unified navigator for control, video, computers and the Internet. It’s an idea that
revolutionized the industry, forever changing the way we view our connected
world.

AMX G4 GRAPHICS

• 32-bit Touch Panel graphics with 8-bit alpha-channel transparency

• 16 million color palette

• Animated buttons/icons

• Transparent images and buttons

KEY TPI/4 FEATURES

• 24-bit video/graphics

• RGB, Video, S-Video

• Resizeable windows

• Real-time video on all windows

• Inputs up to 1600x1200 sized images

• Outputs up to 1280x1024 displays

• Routes USB/PS2 mouse and keyboard data via USB to computers from

each RGB input

• Plays WAV and MP3 audio files

• Operates on ICSNet and Ethernet networks

• Four scalable video windows are driven by any combination of four

TP4-RGB and TP4-VID cards

• Adapts to specific display requirements using software programmable

refresh rates

POWER:

• NXP-TPI/4 unit: 750 mA @ 12 VDC

• TP4-VID input card: 400 mA @ 12 VDC

• TP4-RGB input card: 400 mA @ 12 VDC

MEMORY:

• 64MB SDRAM (upgradeable to 256MB)

• 64MB Compact Flash (upgradeable to 1GB) factory programmed

with panel firmware

DIMENSIONS:

• NXP-TPI/4: 2.12" x 16.95" x 10.24"

(5.38 cm x 43.05 cm x 26.01 cm)

• TP4-VID: 1.05" x 2.80" x 8.60" (with connector - 9.34 cm)

(2.67 cm x 7.11 cm x 21.84 cm (with connector - 23.72 cm)

• TP4-RGB: 1.05" x 2.80" x 8.60"

(2.67 cm x 7.11 cm x 21.84 cm)

WEIGHT:

• NXP-TPI/4 base unit: 4.80 lbs (2.18 kg)

• NXP-TPI/4 with two cards: 6.05 lbs (2.74 kg)

ENCLOSURE:

• Metal with black matte finish

For more information about AMX products and services visit www.amx.com
11-03

TOUCH DRIVERS:

• ELO

®

, MicroTouch®, DynaPro®, SmartTech®,EZScreen®, Wacom®, IST

®

FRONT PANEL COMPONENTS:

• RS-232 (DB-9) 9-pin serial port. Used for PC to TPI/4 programming

• Four pushbuttons to change Resolution, Touch, Calibration and Setup settings

• Six LEDs display the activity of inputs 1-4, Power and ICSP

REAR PANEL COMPONENTS:

• RS-232 (DB-9) 9-pin serial port. Used to connect a pointer device such

as a mouse or touch screen

• USB port can be used to connect a pointer device

• 2 PS/2 ports for keyboard and mouse control

• 2 USB host ports for keyboard and mouse control

• HD-15 VGA output connector with a maximum resolution of 1280x1024 @ 60 Hz

• 2 RJ-45 ICSNet ports

• 1 RJ-45 10/100baseT Ethernet port

INPUT CARD SLOTS:

• Any combination of 4 TPI/4 input cards

• TP4-RGB Card – HD15 D-Sub and USB port for G4 Computer Control

• TP4-VID Video Card – Switchable Composite and S-Video input

AUDIO:

• Stereo output through a 3.5mm mini-jack

TP4-VID

TPI/4 Video Input Card

FG2275-10

FEATURES:

• BNC composite and S-Video inputs

• NTSC/PAL/SECAM

• Software switchable between Composite and S-Video

• Status LEDs indicate Composite/S-Video selection

• Use the TP4-VID input module in any input slot to connect video sources,

such as VCRs and DVDs

• Accepts Composite and S-Video input signals for scalable video windows

• Supports NTSC/PAL/SECAM video input signals

• Inputs selectable under program control

CONNECTORS

• BNC Composite Video Input

• S-Video Video Input

• Composite LED indicates that its respective connector is currently selected

for video input

• S-Video LED indicates that its respective connector is currently selected

for video input

TP4-RGB

TPI/4 RGB Input Card

FG2275-20

FEATURES:

• HD15 RGB connector for RGB graphics

• 640x480 to 1600x1200 (scaled to 1280x1024)

• USB Mouse/Keyboard Output

• Use the TP4-RGB input module in any input slot to connect RGB-type sources

such as VGA, SVGA, etc.

• Accepts RGBHV, RGBS (H/V), and RGsB

• Accepts computer-level graphics for resizeable video windows

• USB host port used for pass-through computer control

CONNECTORS

• HD-15 D-Sub Graphics Input

• USB Mouse/Keyboard Output Port

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

TPI/4 ACCESSORIES

TP4-RGBCBL

RGB Breakout Cable, 15 Pin Female

FG2275-30

NXA-CFTPI128M

128MB Compact Flash Upgrade for TPI/4

FG2116-12

NXA-CFTPI256M

256MB Compact Flash Upgrade for TPI/4

FG2116-13

NXA-CFTPI512M

512MB Compact Flash Upgrade for TPI/4

FG2116-14

NXA-CFTPI1G

1GB Compact Flash Upgrade for TPI/4

FG2116-15

NXA-EXM128M

128MB SDRAM Upgrade for TPI/4

FG079-01

NXA-EXM256M

256MB SDRAM Upgrade for TPI/4

FG079-02

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

VIEWPOINT

WIRELESS TOUCH

PANELS

ViewPoint Wireless
Touch Panels

8.4" MODERO VIEWPOINT TOUCH PANELS

The 8.4" Modero ViewPoint (MVP-8400) is the ultimate user interface, incorporating wireless mobility, Table Top functionality, and
the flexibility to operate as a Wall/Flush Mount unit. The MVP-8400 also includes 1-way and 2-way communications capabilities
and standard 802.11b wireless technology. This MVP of control offers powerful and affordable Touch Panel solutions, achieving
one-touch automation without compromising the advanced control features that have become staples of AMX.

MVP-8400

8.4" Modero ViewPoint Touch Panel

FG5965-02

The MVP-8400 sets a new benchmark in wireless Touch Panel control,
providing maximum comfort and convenience. The popular, AMX-exclusive
SmoothTilt™, available on every Modero Touch Panel, enhances Table Top
convenience. With one hand, the MVP-8400 can be quietly and effortlessly
adjusted for the optimum viewing angle. The MVP-8400 continues to provide
the most innovative features on the market, including the ability to display
stunning G4 graphics and wireless multimedia. The MVP-8400 is just the right
size for any integrated environment. AMX now enables the end user and dealer
to choose from an expanded line of Modero Touch Panels, designed to meet
their specific needs today and into the future.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DISPLAY

• 8.4" Color active-matrix TFT

• (800 x 600 pixel resolution)

• Viewing Angle: + 120° (Left to Right)

• + 80° (Top to Bottom)

• Display colors: 256K (18-bit color depth)

• Brightness: 180 cd/m2

• Contrast: 350:1

• Anti-glare Overlay

• Aspect Ratio: 4x3

MEMORY

• 64MB RAM

• 64MB Compact Flash (upgradeable to 1GB)

POWER

• Operates with 1 or 2 MVP-BP battery packs

• 12 VDC Power Supply for recharging batteries

INTERFACES

• 802.11b Wireless Ethernet for 2-way network communications

• Mini-USB for programming file transfer

• Docking Station Interconnect

• Power Supply, coaxial barrel connector

FRONT PANEL

• Front Buttons: 9 programmable buttons

• Speakers: 2 internal

• Microphone: Used for intercom applications

INCLUDED ACCESSORIES

• Two MVP-BP

• PS4.4

• Stylus

OPTIONAL ACCESSORIES

• MVP-TDS, Table Top/Tilt Docking Station

• MVP-WDS, Wall/Flush Mount Docking Station

• MVP-KS, Kickstand

• MVP-BP, Spare Battery Pack

• PS4.4, Power Supply

• MVP-STYLUS, Pack of 3 Stylus

• CB-MVPWDS, Wall/Flush Mount Docking Station Conduit Box

• CC-USB, Programming Cable

• NXA-CFSP128M, 128M Compact Flash

• NXA-CFSP256M, 256M Compact Flash

• NXA-CFSP512M, 512M Compact Flash

• NXA-CFSP1G, 1G Compact Flash

MECHANICAL FEATURES

• Dimensions (HWD): 7.165" x 10.474" x 1.205" (18.20 cm x 26.60 cm x 3.06 cm)

• Weight: 2.0 lbs (0.91 kg)

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

7.5" MODERO VIEWPOINT TOUCH PANELS

The 7.5" Modero ViewPoint (MVP-7500) is the ultimate user interface, incorporating wireless mobility, Table Top functionality, and
the flexibility to operate as a Wall/Flush Mount unit. The MVP-7500 also includes 1-way and 2-way communications capabilities
and standard 802.11b wireless technology. This MVP of control offers powerful and affordable Touch Panel solutions, achieving
one-touch automation without compromising the advanced control features that have become staples of AMX.

MVP-7500

7.5" Modero ViewPoint Touch Panel

FG5965-02

The MVP-7500 provides maximum comfort and convenience – the perfect size
for any integrated environment. The popular, AMX-exclusive SmoothTilt™,
available on every Modero Touch Panel, enhances Table Top convenience. With
one hand, the MVP-7500 can be quietly and effortlessly adjusted for the
optimum viewing angle. The MVP-7500 continues to provide the most
innovative features on the market, including the ability to display stunning G4
graphics. AMX now enables the end user and dealer to choose from an
expanded line of Modero Touch Panels, designed to meet their specific needs
today and into the future.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DISPLAY

• 7.5" Color passive-matrix

• (600 x 480 pixel resolution)

• Viewing Angle: + 80° (Top to Bottom)

• + 80° (Top to Bottom)

• Display colors: 4K (12-bit color depth)

• Brightness: 120 cd/m2

• Contrast: 20:1

• Anti-glare Overlay

• Aspect Ratio: 4 x 3

MEMORY

• 64MB RAM

• 64MB Compact Flash (upgradeable to 1GB)

POWER

• Operates with 1 or 2 MVP-BP battery packs

• 12-18 VDC Power Supply for recharging batteries

INTERFACES

• 802.11b Wireless Ethernet for 2-way network communications

• Mini-USB for programming file transfer

• Docking Station Interconnect

• Power Supply, coaxial barrel connector

FONT PANEL

• Front Buttons: 9 programmable buttons

INCLUDED ACCESSORIES

• One MVP-BP

• PS4.4

• Stylus

OPTIONAL ACCESSORIES

• MVP-TDS, Table Top/Tilt Docking Station

• MVP-WDS, Wall/Flush Mount Docking Station

• MVP-KS, Kickstand

• MVP-BP, Spare Battery Pack

• MVP-STYLUS, Pack of 3 Stylus

• CB-MVPWDS, Conduit Box

• CC-USB, Programming Cable

• NXA-CFSP128M, 128M Compact Flash

• NXA-CFSP256M, 256M Compact Flash

• NXA-CFSP512M, 512M Compact Flash

• NXA-CFSP1G, 1G Compact Flash

MECHANICAL FEATURES

• Dimensions (HWD): 7.165" x 10.474" x 1.329" (18.20 cm x 26.60 cm x 3.37 cm)

• Weight: 2.0 lbs (0.91 kg)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

MODERO VIEWPOINT ACCESSORIES

MVP-TDS

MVP Table Top Docking Station

FG5965-10

Place the wireless MVP into the Table Top Docking Station and re-charge its
batteries while remaining in continuous control of your integrated technology.
The adjustable station creates just the right viewing angle for any situation.
Attach a keyboard and mouse using the docking station's USB ports - a great
feature for surfing the Web with the G4 Computer Control application.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• Fully raised: 7.40" x 7.01" x 9.83" (18.80 cm x 17.80 cm x 25.00 cm)

• Fully lowered height: 4.27" (10.80 cm)

WEIGHT

• 4.57 lbs. (2.07 kg)

FRONT PANEL FEATURES:

• Electromagnet to secure the MVP to the MVP-TDS

• Release push button to disengage the electromagnet and remove the MVP from

the MVP-TDS

• Two LEDs (through push button) to indicate battery-charging status and

MVP communications

REAR PANEL FEATURES:

• (2) Type A USB ports, for keyboard and mouse

• Power supply jack, 13.5VDC, 6mm coaxial male

OPTIONAL ACCESSORIES:

• MVP-8400, 8.4" Modero ViewPoint Touch Panel

• MVP-7500, 7.5" Modero ViewPoint Touch Panel

• MVP-BP, Modero ViewPoint Battery Pack

• PS4.4, 4.4A, power supply with 6mm coaxial connector

MVP-WDS

MVP Wall/Flush Mount Docking Station

FG5965-11

Place the wireless MVP into the Wall/Flush Mount Docking Station and
re-charge its batteries while remaining in continuous control of your integrated
technology. The adjustable station creates just the right viewing angle for any
situation. Attach a keyboard and mouse using the docking station's USB ports ­a great feature for surfing the Web with the G4 Computer Control application.

The MVP-WDS comes with a unique anti-theft locking mechanism. Keep your
MVP panels safe and secure by using the MVP-WDS security latch to maintain
a tight grip on your panel. Removing the panel is just as easy. With a push of
the button, the MVP glides forward for removal and transport. If security is
enabled, a user must enter a valid security code before the MVP is released.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• 8.62" x 12.70" x 2.99" (29.90 cm x 32.30 cm x 7.59 cm)

WEIGHT

• 4.17 lbs. (189 kg)

FRONT PANEL FEATURES:

• Rare earth magnet to secure the MVP to the MVP-WDS

• Release push button to remove the MVP from the MVP-WDS

• Two LEDs (through push button) to indicate battery-charging status and

MVP communications

REAR PANEL FEATURES:

• (2) Type A USB ports, for keyboard and mouse

• Power supply jack, 13.5VDC, 6mm coaxial male

OPTIONAL ACCESSORIES:

• MVP-8400, 8.4" Modero ViewPoint Touch Panel

• MVP-7500, 7.5" Modero ViewPoint Touch Panel

• MVP-BP, Modero ViewPoint Battery Pack

• PS4.4, 4.4A, power supply with 3.5mm phoenix-style connector

• CB-MVPWDS, Conduit box for MVP-WDS

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

MODERO VIEWPOINT ACCESSORIES

MVP-KS

MVP KickStand

FG5965-12

The MVP KickStand, MVP-KS, is compatible with both the MVP-7500 and
MVP-8400 Touch Panel. The MVP-KS allows the MVP to rest at an optimal
viewing angle on any flat level surface.

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• 6.34" x 7.91" x 0.59" (16.10 cm x 20.10 cm x 1.50 cm)

WEIGHT

• 0.67 lbs. (0.30 kg)

MVP-BP

MVP Battery Pack

FG5965-20

STANDARD FEATURES

(PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE)

DIMENSIONS (HWD)

• 0.48" x 1.52" x 8.65" (1.23 cm x 3.86 cm x 21.97 cm)

WEIGHT

• 0.67 lbs. (0.30 kg)

POWER

• Lithium Ion Cells - 7.2 Volts, 3600 mAh

CC-USB

MVP/CV7 Programming Cable

FG10-5965

APPLICATION

• Connects a PC's USB port to the MVP-7500, MVP-8500 or CV7 Touch Panel

• Used to transfer firmware kit files, TPD4 Touch Panel files and IR files

MVP-STYLUS

Replacement MVP Stylus, pack of 3

FG5965-30

PS4.4

13.5 VDC, 4.4 Power Supply,
(regulated 110/220 VAC input)

FG423-44

APPLICATION

• DC power for MVP-7500, MVP-8400 and MVP-TDS

DC POWER OUTPUT

• 13.5 Volts DC, 4.4 Amps

• 6mm Coaxial barrel-style plug

• Switching regulated, overload protected

AC POWER INPUT

• 100-240 VAC

• 50-60 Hz

ENCLOSURE

• Molded black matte plastic

• international IEC cable socket

DIMENSIONS (HWD)

• 4.6" x 2.3" x 1.5" (117 mm x 58 mm x 35 mm)

WEIGHT

• 1 lb. (0.45 kg)

PSN4.4

13.5 VDC, 4.4 Power Supply,
(regulated 110/220 VAC input)

FG423-45

APPLICATION

• DC power for NetLinx systems, MVP-WDS and CV7 Touch Panel

DC POWER OUTPUT

• 13.5 Volts DC, 4.4 Amps

• 3.5 mm phoenix-style plug

• Switching regulated, overload protected

AC POWER INPUT

• 100-240 VAC

• 50-60 Hz

ENCLOSURE

• Molded black matte plastic

• international IEC cable socket

DIMENSIONS (HWD)

• 4.6" x 2.3" x 1.5" (117 mm x 58 mm x 35 mm)

WEIGHT

• 1 lb. (0.45 kg)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

VIEWPOINT TOUCH PANELS

Wireless ViewPoint Touch Panels are an elegant integration of graphic control, wireless convenience, timeless styling and low-cost
practicality. The 1-way and 2-way ViewPoint panels are designed for both desktop and hand-held operation.

*LIMITED AVAILABILITY*

VPN-CP

2-Way ViewPoint Color Wireless
Touch Panel
(includes VPA-BP battery)

FG5964-02 2.4 GHz, Black

Designed for flexible wireless operation, 2-way ViewPoint panels communicate
with Axcess receivers via 2-way NetWave RF, a new spread-spectrum
technology that delivers increased performance and range. A plug-in high­power, rechargeable NiMH Battery Pack delivers up to two weeks of power with
typical use, or up to six hours of continuous operation.

DISPLAY TYPE:

• 256-color passive-matrix LCD

SCREEN DIMENSIONS:

• 6" (152 mm) diagonal; 4.7" x 3.5" (118 mm x 89 mm)

SCREEN RESOLUTION (HV):

• 320x240 pixels

MEMORY:

• 2.5MB (2MB flash)

TRANSMISSION:

• 2-Way NetWave RF – 2.4 GHz spread-spectrum 500-foot range

• 1-Way IR – Can transmit downloaded manufacturer IR codes

INCLUDES: (DOES NOT INCLUDE RECEIVER)

• Four programmable side-screen control buttons

• Internal battery charger

• VPA-BP rechargeable NiMH battery

• 1.5 A @12 VDC power supply

• 3' (9.8 m) RS-232 programming adapter cable

ENCLOSURE:

• Molded plastic with black matte finish

DIMENSIONS (HWD):

• 2.8" x 8.8" x 6.0" (71 mm x 222 mm x 152 mm)

POWER:

• Power supply or battery (6-hour continuous battery operation)

WEIGHT:

• 1.8 lbs (0.8 kg) with battery or 1.6 lbs (0.7 kg) without battery

SOFTWARE:

• TPDesign3 Touch Panel design/programming

• VPXpress ViewPoint System Software

OPTIONS:

• VPA-DS ViewPort Docking Station

• VPA-BP Battery Pack

• AXR-NWS NetWave Server

VPT-CP

1-Way ViewPoint Color Wireless Touch panel

FG5964-304 304 MHz, Black
FG5964-418 418 MHz, Black
FG5964-433 433 MHz, Black

*LIMITED AVAILABILITY*

FG5964-310 310 MHz, Black
FG5964-315 315 MHz, Black

Designed for flexible wireless operation, 1-way ViewPoint panels communicate
with Axcess receivers via 1-way RF or IR commands. A plug-in high-power,
rechargeable NiMH Battery Pack delivers up to two weeks of power with typical
use, or up to six hours of continuous operation.

DISPLAY TYPE:

• 256-color passive-matrix LCD

SCREEN DIMENSIONS:

• 6" (152 mm) diagonal; 4.7" x 3.5" (118 mm x 89 mm)

SCREEN RESOLUTION (HV):

• 320x240 pixels

MEMORY:

• 2.5MB (2MB flash)

TRANSMISSION:

• 1-Way Wireless RF – Must specify frequency

• 1-Way Wireless IR – Switchable high-/low-frequency IR (455 or 38 kHz). Can

transmit downloaded manufacturer IR codes

INCLUDES: (DOES NOT INCLUDE RECEIVER)

• Four programmable side-screen control buttons

• Internal battery charger

• VPA-BP rechargeable NiMH battery

• 1.5 A @12 VDC power supply

• 3´ (9.8 m) RS-232 programming adapter cable

ENCLOSURE:

• Molded plastic with black matte finish

DIMENSIONS (HWD):

• 2.8" x 8.8" x 6.0" (71 mm x 222 mm x 152 mm)

POWER:

• Power supply or battery (6-hour continuous battery operation)

WEIGHT:

• 1.8 lbs (0.8 kg) with battery

• 1.6 lbs (0.7 kg) without battery

SOFTWARE:

• TPDesign3 Touch Panel design/programming

• VPXpress ViewPoint System Software

OPTIONS:

• VPA-DS ViewPort Docking Station

• VPA-BP Battery Pack

• AXR-RF Receiver

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

VIEWPOINT TOUCH PANEL ACCESSORIES

VPA-DS

ViewPort Docking Station

FG5961-02

Cradles ViewPoint Touch Panel at perfect angle for Table Top control.

FEATURES

• Charges ViewPoint’s internal battery fully within two hours

• Stores spare VPA-BP battery pack; charges battery when ViewPoint is not present

in cradle

LED INDICATORS

• Red – spare battery is charging

• Yellow – ViewPoint connected to cradle

• Green – spare battery is fully charged

DIMENSIONS (HWD):

• 4.8" x 8.3" x 7.62" (122 mm x 211 mm x 194 mm)

WEIGHT:

• 18.4 oz (522 g)

POWER:

• 1.52 A @12 VDC power supply (not included)

1-WAY WIRELESS RF AND IR RECEIVERS

AXR-RF

RF Receiver (AXLink)

FG782-304 304 MHz
FG782-310 310 MHz
FG782-315 315 MHz
FG782-418 418 MHz
FG782-433 433 MHz

RF Reception: Super-heterodyne, must specify frequency

RANGE:

• 100-300' range, depending on transmitter

INCLUDES:

• Movable, hinged antenna to allow optimal placement

ENCLOSURE:

• Molded black matte plastic for free-standing use

DIMENSIONS (HWD):

• 1.5" x 5" x 5" (38 mm x 129 mm x 129 mm)

WEIGHT:

• 11.6 oz (330 g)

VPA-BP

ViewPoint Rechargeable
Battery (NiMH)

FG0962

BATTERY:

• 6-cell NiMH (Nickel Metal Hydride) 7.2 VDC, 3.7 Amp hours

BATTERY LIFE:

• Approx. 6 hours full-bright run time (1-way wireless)

DIMENSIONS (HWD):

• 5.3" x 2.0" x 0.7" (136 mm x 51 mm x 18 mm)

WEIGHT:

• 11.7 oz (331.7 g)

OPTIONS:

• VPA-DS ViewPort Docking Station

2-WAY WIRELESS RECEIVER

*LIMITED AVAILABILITY*

AXR-NWS

NetWave Server
(NetWave 2-way 2.4 gHz RF, AXLink)

FG5930-02

FEATURES

• Transmits and receives 2-way wireless commands

• Manages up to 16 ViewPoint or other NetWave wireless panels

RF FREQUENCY

• NetWave 2.4 GHz digital spread-spectrum RF, 500-foot range

WIRING

• 4-pin AXLink terminal

DIMENSIONS (HWD):

• 1.5" x 5.5" x 6.5" (38 mm x 140 mm x 165 mm)

WEIGHT:

• 1.4 lbs (0.6 kg)

POWER:

• 12 VDC, 100 mA

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

G3 TOUCH PANELS

G3
Touch Panels

10.4" COLOR GRAPHIC ACTIVE TOUCH PANELS

Size and functionality make the 10.4" Touch Panel one of the most universally accepted user interfaces in the industry.
Sleek and unobtrusive, it fits into any decor and accommodates all the controls needed for a system of any size.

*LIMITED AVAILABILITY*

AXT-CG10

10.4" Color Graphic
Table Top Touch Panel

FG950-60

• Screen tilts for best viewing angle

• 10.4" color-active LCD with a 640x480 pixel resolution

• Features a full-screen VGA graphics window

• Includes a resizeable video window

POWER

• 1 A @ 12 VDC

MEMORY

• 4MB

CONNECTORS

• 4-pin AXLink and 2-pin 12VDC power jacks

• DB-9 male PC/mouse input

• RCA female connector

• 15-pin DB-15 (high density) male connector

BASE DIMENSIONS

• 11.46" x 9.46" (29.12 cm x 24.0 cm)

TILT SCREEN HEIGHTS

• Lowered – 4.14" (10.52 cm)

• Raised – 9.84" (24.99 cm)

WEIGHT

• 4.6 lbs (2.08 kg)

*LIMITED AVAILABILITY*

AXM-CG10/PB

10.4" Color Graphic Video
Rack Mount Touch Panel,
External Buttons

FG952-61

The AXM-CG10 10.4" Color Active Graphic Rack-Mount Touch Panel is the
ultimate power tool, complete with full-screen graphics, video and control
functions – all within the same, integrated, graphic Touch Panel.

POWER

• 1 A @ 12 VDC

DIMENSIONS

• 8.72" x 19.00" x 8.1" (22.15 cm x 48.26 cm x 4.62 cm)

• 19.0" Rack Mount, Metal with black matte finish, 5 rack units high

WEIGHT

• 6.1 lbs (2.77 kg)

ADDITIONAL PANEL OPTION

AXM-CG10

Color Graphic Rack Mount

FG952-60

*LIMITED AVAILABILITY*

AXD-CG10/PB

Color Graphic Flush Mount,
External Push Buttons, Black

FG952-91

The AXD-CG10 Color Graphic Active Flush Mount Touch Panel provides
simplified full-size control on walls, in lecterns, and on other flat surfaces. The
AXD-CG10 communicates with the control system over the AXLink data bus.
This panel uses a color active-matrix 10.4" LCD to display interactive control
graphics, a video window that can be resized, and a full-screen display of
computer-driven images.

POWER

• 1 A @ 12 VDC

BASE DIMENSIONS

• 8.88" x 12.88" x 2.19" (22.56 cm x 32.72 cm x 5.56 cm)

BEZEL COLOR OPTIONS

• Black, white or ivory

DÉCOR®-STYLE ENCLOSURES

• Matte finish, screwed security overlay

OPTIONS

• CB-TP3 Backbox

WEIGHT

• 6.1 lbs (2.77 kg)

ADDITIONAL PANEL CONFIGURATIONS

AXD-CV10

Color Video Flush Mount, White

FG951-90

AXD-CG10

Color Graphic Flush Mount, Ivory

FG952-95

AXD-CG10

10.4" Color Graphic Flush Mount Touch Panel, Black

FG952-90

AXD-CG10/PB

Color Graphic Flush Mount, External Push Buttons, White

FG951-91

AXD-CG10/PB

Color Graphic Flush Mount, External Push Buttons, Ivory

FG952-96

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

10.4" COLOR VIDEO ACTIVE TOUCH PANELS

The 10.4" Touch Panels from AMX are still some of the most popular user interfaces in the control industry.

AXT-CV10

10.4" Color Video Table Top
Touch Panel

FG950-40

• Screen tilts for best viewing angle

• 10.4" color-active LCD with a 640 x 480 pixel resolution

• Includes a resizeable video window

POWER

• 1 A @ 12 VDC

MEMORY

• 5MB (4MB flash)

CONNECTORS

• 4-pin AXLink and 2-pin 12VDC power jacks

• DB-9 male PC/mouse input

• RCA female connector

BASE DIMENSIONS

• 11.46" x 9.46" (29.12 cm x 24.0 cm)

TILT SCREEN HEIGHTS

• Lowered – 4.14" (10.52 cm)

• Raised – 9.84" (24.99 cm)

WEIGHT

• 4.6 lbs (2.08 kg)

AXM-CV10/PB

10.4" Color Video
Rack Mount Touch Panel,
External Buttons

FG950-41

The AXM-CG10 10.4" Color Graphic Rack-Mount Touch Panel is the ultimate
power tool, complete with full-screen graphics, video and control functions –
all within the same, integrated, graphic Touch Panel.

POWER

• 1 A @ 12 VDC

DIMENSIONS

• 8.72" x 19.00" x 8.1" (22.15 cm x 48.26 cm x 4.62 cm)

• 19.0" Rack Mount, Metal with black matte finish, 5 rack units high

WEIGHT

• 6.1 lbs (2.77 kg)

ADDITIONAL PANEL OPTION

AXM-CV10

Color Graphic Rack Mount

FG952-80

AXD-CV10/PB

10.4" Color Video
Flush Mount Touch Panel,
External Buttons

FG952-81

The AXD-CV10/PB Color Video Flush Mount Touch Panel with External
Pushbuttons provides simplified full-size control on walls, in lecterns and on
other flat surfaces. The panel communicates with a control system over the
AXLink data bus. The AXD-CV10/PB has a color active-matrix 10.4" LCD,
control graphics and a video window that can be resized.

POWER

• 1 A @ 12 VDC

BASE DIMENSIONS

• 8.88" x 12.88" x 2.19" (22.56 cm x 32.72 cm x 5.56 cm)

BEZEL COLORS

• Black or white

DÉCOR-STYLE ENCLOSURES

• Matte finish, screwed security overlay, and BB-TP3 Backbox

PUSHBUTTONS

• Up to 24 pushbuttons (/PB), 12 on each side

OPTIONS

• BB-TP3 Backbox

WEIGHT

• 6.1 lbs (2.77 kg)

ADDITIONAL PANEL CONFIGURATIONS

AXD-CV10

Color Video Flush Mount, Black

FG952-80

AXD-CG10

Color Graphic Flush Mount, White

FG951-80

AXD-CV10

Color Video Flush Mount, Ivory

FG952-85

AXD-CV10/PB

Color Video Flush Mount, External Push Buttons, White

FG951-81

AXD-CV10/PB

Color Video Flush Mount, External Push Buttons, Ivory

FG952-86

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

10.4" COLOR ACTIVE TOUCH PANELS

The 10.4" Touch Panels from AMX are still some of the most popular user interfaces in the control industry.

*LIMITED AVAILABILITY*

AXT-CA10

10.4" Color Active
Touch Panel

FG950-30

The 10.4" Touch Panels from AMX are still some of the most popular user
interfaces in the control industry.

• Screen tilts for best viewing angle

• 10.4" color-active LCD with a 640x480 pixel resolution

POWER

• 1 A @ 12 VDC

MEMORY

• 5MB (4MB flash)

CONNECTORS

• 4-pin AXLink and 2-pin 12VDC power jacks

• DB-9 male PC/mouse input

BASE DIMENSIONS

• 11.46" x 9.46" (29.12 cm x 24.0 cm)

TILT SCREEN HEIGHTS

• Lowered – 4.14" (10.52 cm)

• Raised – 9.84" (24.99 cm)

ENCLOSURE

• Black plastic with matte finish

WEIGHT

• 4.6 lbs (2.08 kg)

*LIMITED AVAILABILITY*

AXM-CA10/PB

10.4" Color Active
Rack Mount Touch Panel,
External Buttons

FG952-21

The AXM-CA10 10.4" Color Active Rack-Mount Touch Panel with External
Pushbuttons features a large, brilliant LCD that helps to transform advanced
technology into easy-to-operate tools. This includes interactive graphics that
perform a number of functions at the simple touch of a command button.

• Installs into a flat surface

• Viewing angle can be changed dependent on location: Wall or podium

POWER

• 1 A @ 12 VDC

DIMENSIONS

• 8.72" x 19.00" x 1.78" (22.15 cm x 48.26 cm x 4.52 cm)

WEIGHT

• 6.1 lbs (2.77 kg)

ADDITIONAL PANEL OPTION

AXM-CA10

Color Graphic Rack Mount

FG952-20

For more information about AMX products and services visit www.amx.com
11-03

*LIMITED AVAILABILITY*

AXD-CA10/PB

10.4" Color Active
Flush Mount Touch Panel,
External Buttons

FG952-71

The AXD-CA10/PB Color Active Flush Mount Touch Panel with External
Pushbuttons provides simplified full-size touch control on walls, in lecterns
and on other flat surfaces. The AXD-CA10/PB communicates with the control
system over the AXLink data bus. The panel displays control graphics on a
color active-matrix 10.4" LCD.

• Installs into a flat surface

• Viewing angle can be changed dependent on location: Wall or podium

POWER

• 1 A @ 12 VDC

BASE DIMENSIONS

• 8.88" x 12.88" x 2.19" (22.56 cm x 32.72 cm x 5.56 cm)

BEZEL COLORS

• Black or white

DÉCOR-STYLE ENCLOSURES

• Matte finish, screwed security overlay, and BB-TP3 Backbox

PUSHBUTTONS

• Up to 24 pushbuttons (/PB), 12 on each side

OPTIONS

• CB-TP3 Backbox

WEIGHT

• 6.1 lbs (2.77 kg)

ADDITIONAL PANEL CONFIGURATIONS

AXD-CA10

Color Active Flush Mount, Black

FG950-30

AXD-CA10

Color Active Flush Mount, White

FG951-70

AXD-CA10

Color Active Flush Mount, Ivory

FG952-70

AXD-CA10/PB

Color Active Flush Mount, External Push Buttons, White

FG952-71

AXD-CA10/PB

Color Active Flush Mount, External Push Buttons, Ivory

FG952-76

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

G3 TOUCH PANEL ACCESSORIES

CB-TP3 TP3 Conduit Box

FG025-10

APPLICATIONS:

• AXD-CG and AXD-CG/PB

• AXD-CV and AXD-CV/PB

• AXD-CA and AXD-CA/PB

EXM-1MB 1MB Extended Memory

FG074

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

6" COLOR ACTIVE VIDEO TOUCH PANELS

AXD-CV6

6" Color Active Video
Flush Mount Touch Panel

FG5924-10 White
FG5924-11 Black

Like to see the video you’re controlling? Looking for the perfect panel for
the wall or lectern? You’ll love the CV6 6" Color Active Video Flush Mount
Touch Panel. Featuring a resizeable video window, colorful icons and simplified
menus, the 6" panel is the ideal navigator to your media-rich world.

FEATURES

Display Type: 6" color active-matrix LCD, 320x240 pixels

Video: Resizeable video window, NTSC/PAL/SECAM video

Memory: 2.5MB (2MB flash, 512KB RAM))

Network: AXLink

Power: 12 VDC, 1.18 A

Design Software: TPDesign3

INCLUDES

• 4-pin AXLink terminal

• 2-pin PWR terminal

• Mounting Set (drywall clips and screws)

• Mounting Template

CONNECTIONS

• BNC Video input

• 4-pin AXLink terminal

• 2-pin power terminal

• DB-9-Program port

ENCLOSURE

• Faceplate available in white (standard) or black finish

• Molded backbox mounts to any flat surface

MOUNTING

• Included metal enclosure easily surface-mounts with screws or drywall clips

• Panel snaps into enclosure for seamless, simple installation

DIMENSIONS (HWD)

• Faceplate: 5.37" x 6.79" x 0.3" (136.4 mm x 172.46 mm x 7.62 mm)

• Backbox: 4.43" x 5.97" x 2.4" (112.52 mm x 151.63 mm x 60.9 mm)

WEIGHT

• 7.7 lbs (3.5 kg)

OPTIONS

• CB-CV6 CV6 Backbox, simplifies pre-installation for AXD-CV6 panels

• AC-CV6T Accessory Table Top Kit

AC-CV6T

Table Top Enclosure (Accessory)

FG5924-20 Dark Gray
FG5924-21 Platinum
FG5924-22 Unfinished

Aluminum

The AC-CV6T Table Top Enclosure is a pioneering effort by AMX to create yet
another ideal control and automation feature. With so many end users drawn to
the overall functionality and design of the 6" Touch Panel, creating the AC­CV6T for added convenience was the next step.

The Table Top Enclosure remains small in size so that the 6" Touch Panel
delivers the ultimate in convenience and practicality. The end user can
comfortably navigate on-screen buttons, security cameras, baby-cams and
more. The AC-CV6T can be positioned on a coffee table or desk for ongoing
control and automation at all times. The metal casing is offered in Dark Gray
and Platinum, and also customizable unfinished Aluminum in order to match
any interior decoration.

COMPATIBILITY AND CONNECTIONS

• All AXD-CV6 models only

• All cable connections are routed out of the enclosure through the rear opening

on the enclosure.

• Internal connectors are equivalent to those AXD-CV6 rear connectors

• AXD unit contains a 4-pin AXLink connector for communication to an AMX

Central Controller and a BNC connector for video signals.

• AC-CV6T Table Top cable (Video/AXLink cable combo) – 10' (3.05 meters).

Uses BNC and mini-Phoenix AXLink connectors

OPTIONS

• PSN2.8 Power Supply

• PSN6.5 Power Supply

• CB-CV6 Conduit/Wallbox (includes flanges for installation to studs during

the construction phase)

DIMENSIONS AND WEIGHT

• AXT Table Top unit: 3.84" X 6.48" X 5.33" (9.75 cm x 16.46 cm x 13.54 cm)

• Faceplate: 6.37" x 8.66" x 0.62" (16.18 cm x 21.99 x 1.57 cm)

• Entire unit: 11.49 lbs. (5.21 kg)

• Enclosure only: 3.75 lbs. (1.70 kg)

CB-CV6

CV6 Conduit Box

FG029-10

For more information about AMX products and services visit www.amx.com
11-03

Conduit box for AXD-CV6 Touch Panel

DIMENSIONS

• 6.05" x 4.50" x 3.40" (153.7 mm x 114.3 mm x 86.4 mm)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

5.5" COLOR PASSIVE TOUCH PANELS

AXT-MCP

5.5" Color Passive Touch Panel

FG925-20

AXD-MCP

5.5" Color Flush Mount Touch Panel

FG925-40 White
FG925-60 Black
FG925-80 Ivory

Big control capabilities in a compact size. The AXT-MCP 5.5" Color Passive
Touch Panel, boasts a vibrant color passive-matrix LCD, high resolution
graphics, a rich color background and an adjustable console for the best
viewing angle and ease of operation. As an option, 12 instant-access
buttons with custom engraving can be added for extended control features
(AXT-MCP/PB).

• Mounts on any flat surface

• Available in black

• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

• 5.5" color passive-matrix LCD with a resolution of 320x240 pixels

• Visible area: 5 inches (12.70 cm)

• Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

• 485 mA @ 12 VDC

MEMORY

• 512KB of SRAM and 2MB of flash for a total of 2.5MB (2MB available for

buttons, icons, bitmaps and fonts)

DIMENSIONS

• Base dimensions (WD): 8.23" x 7.51" (20.90 cm x 19.08 cm)

• Display height: 3.87" (9.83 cm) fully lowered, 5.95"(15.11 cm) fully raised

ENCLOSURES

• TiltScreen Table Top console; black plastic with matte finish

REAR CONNECTORS

• AXLink: Mini-XLR (male) 4-pin AXLink connector

PUSHBUTTONS

• 12 programmable pushbuttons (6 on each side)

COMPATIBILITY

• Axcess and Landmark Control Systems (AXLink is the most common

control standard)

OPTIONAL ACCESSORIES

• PSN2.8 Power supply (can be used on the MCP)

• PSN6.5 Power supply (recommended for use on the MCP)

• External pushbuttons (6 per side)

WEIGHT

• 2.10 lbs (0.95 kg)

The 5.5" Color Flush Mount Touch Panel contains a mini 256 color
passive-matrix LCD. The self-contained enclosure uses a microprocessor to
control a wide range of multi-media equipment. Using the TPDesign3 software,
you can create custom control and display pages with buttons, icons, sliders,
bargraphs, time displays, logos and drawings.

• Mounts in a wall, lectern or any flat surface

• Available with white or black faceplates

• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

• 5.5" color passive-matrix LCD with a resolution of 320x240 pixels

• Visible area: 5 inches (12.70 cm)

• Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

• 485 mA @ 12 VDC

MEMORY

• 512KB of SRAM and 2MB of flash for a total of 2.5MB

(2 MB available for buttons, icons, bitmaps, and fonts)

DIMENSIONS

• Decor faceplate: 5.00" x 8.38" x 0.35" (12.70 cm x 21.27 cm x 0.89 cm)

• Low-profile Back Box: 4.25" x 7.10" x 2.17" (10.80 cm x 18.03 cm x 5.51 cm)

• BB-MTP: 4.17" x 6.98" x 2.17" (10.59 cm x 17.73 cm x 5.51 cm)

ENCLOSURES

• Metal sub-plate and bezel with black or white matte finish

• Detachable front panel faceplate

REAR CONNECTORS

• AXLink: 4-pin male connector for transfer of data and power to the

AMX Central Controller

COMPATIBILITY

• Axcess and Landmark Control Systems (AXLink is the most common

control standard)

OPTIONAL ACCESSORIES

• PSN2.8 Power supply (can be used on the MCP)

• PSN6.5 Power supply (recommended for use on the MCP)

• 4-pin mini-XLR

• Cable assembly

• External pushbuttons (6 per side)

• CB-MTP and faceplate bezel security plates

WEIGHT

• 3.90 lbs (1.70 kg)

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03

5.5" COLOR PASSIVE TOUCH PANELS

AXD-MCP/PB

5.5" Color Flush Mount Touch Panel
with External Pushbuttons

FG925-41 White
FG925-61 Black
FG925-81 Ivory

The 5.5" Color Flush Mount Touch Panel contains a mini 256 color
passive-matrix LCD. The self-contained enclosure uses a microprocessor to
control a wide range of multi-media equipment. Using the TPDesign3 software,
you can create custom control and display pages with buttons, icons, sliders,
bargraphs, time displays, logos and drawings.

• Mounts in a wall, lectern, or any flat surface

• Available with white or black faceplates

• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

• 5.5" color passive-matrix LCD with a resolution of 320x240 pixels

• Visible area: 5 inches (12.70 cm)

• Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

• 485 mA @ 12 VDC

MEMORY

• 512KB of SRAM and 2MB of flash for a total of 2.5MB

(2MB available for buttons, icons, bitmaps, and fonts)

DIMENSIONS

• Decor faceplate: 5.00" x 8.38" x 0.35" (12.70 cm x 21.27 cm x 0.89 cm)

• Low-profile Back Box: 4.25" x 7.10" x 2.17" (10.80 cm x 18.03 cm x 5.51 cm)

• BB-MTP: 4.17" x 6.98" x 2.17" (10.59 cm x 17.73 cm x 5.51 cm)

ENCLOSURES

• Metal sub-plate and bezel with black or white matte finish

• Detachable front panel faceplate

REAR CONNECTORS

• AXLink: 4-pin male connector for transfer of data and power to

the AMX Central Controller

PUSHBUTTONS

• 12 programmable pushbuttons (6 on each side)

COMPATIBILITY

• Axcess and Landmark Control Systems (AXLink is the most common

control standard)

OPTIONAL ACCESSORIES

• PSN2.8 Power supply (can be used on the MCP)

• PSN6.5 Power supply (recommended for use on the MCP)

• 4-pin mini-XLR

• Cable assembly

• External pushbuttons (6 per side)

• CB-MTP and faceplate bezel security plates

WEIGHT

• 3.90 lbs (1.70 kg)

AXM-MCP

5.5" Rack-Mount
Color Passive Touch Panel

FG925-90 Black

• Mounts in a wall, lectern or any flat surface

• Available with a black faceplate

• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

• 5.5" color passive-matrix LCD with a resolution of 320x240 pixels

• Visible area: 5 inches (12.70 cm)

• Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

• 485 mA @ 12 VDC

MEMORY

• 512KB of SRAM and 2MB of flash for a total of 2.5MB

(2MB available for buttons, icons, bitmaps, and fonts)

DIMENSIONS

• Rack-mount: 5.22" x 19.0" x 2.37" (13.26 cm x 48.26 cm x 6.02 cm)

ENCLOSURES

• 19" (48.3 cm) rack-mount; metal black matte finish

(3 rack units high)

REAR CONNECTORS

• AXLink: 4-pin male connector for transfer of data and power

to the AMX Central Controller

COMPATIBILITY

• Axcess and Landmark Control Systems (AXLink is the most common

control standard)

INCLUDED ACCESSORIES

• Low-profile Back Box

• 4-pin female AXLink bus connector

OPTIONAL ACCESSORIES

• PSN2.8 Power supply (can be used on the MCP)

• PSN6.5 Power supply (recommended for use on the MCP)

• External pushbuttons (6 per side)

WEIGHT

• 3.60 lbs (1.60 kg)

For more information about AMX products and services visit www.amx.com
11-03

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.

AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

5.5" COLOR PASSIVE TOUCH PANELS

AXM-MCP/PB

5.5" Rack-Mount Color Touch Panel
with External Pushbuttons

FG925-91 Black

• Mounts in a wall, lectern, or any flat surface

• Available with a black faceplate

• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)

LCD

• 5.5" color passive-matrix LCD with a resolution of 320x240 pixels

• Visible area: 5 inches (12.70 cm)

• Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)

POWER

• 485 mA @ 12 VDC

MEMORY

• 512KB of SRAM and 2MB of flash for a total of 2.5MB

(2MB available for buttons, icons, bitmaps, and fonts)

DIMENSIONS

• Rack-mount: 5.22" x 19.0" x 2.37" (13.26 cm x 48.26 cm x 6.02 cm)

ENCLOSURES

• 19" (48.3 cm) rack-mount; metal black matte finish (3 rack units

high)

PUSHBUTTONS

• 12 programmable pushbuttons (6 on each side)

REAR CONNECTORS

• AXLink: 4-pin male connector for transfer of data and power to

the AMX Central Controller

COMPATIBILITY

• Axcess and Landmark Control Systems (AXLink is the most common

control standard)

INCLUDED ACCESSORIES

• Low-profile Back Box

• 4-pin female AXLink bus connector

OPTIONAL ACCESSORIES

• PSN2.8 Power supply (can be used on the MCP)

• PSN6.5 Power supply (recommended for use on the MCP)

• External pushbuttons (6 per side)

WEIGHT

• 3.60 lbs (1.60 kg)

CB-MTP

MTP Conduit box

FG027-10

APPLICATIONS

• AXD-MLC and AXD-MLC/PB

• AXD-MCV and AXD-MCV/PB

• AXD-MCP and AXD-MCP/PB

CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.

For more information about AMX products and services visit www.amx.com

11-03