AMX NXT-NXD-1200V User Manual

Quick Start Guide

NXD & NXT-1200V

For more detailed installation, configuration, programming, file transfer, and
operating instructions, refer to the 1200V-Series Modero Touch Panels
Instruction Manual available on-line at www.amx.com.

NXD-1200V

(Wall Mount)

NXT-1200V
(Table Top)

FIG. 1 Sample Wall Mount and Table Top 1200V Touch Panels

ATTENTION!

Verify you are using the latest NetLinx Master and Modero touch panel firmware
(available from www.amx.com). Verify the TPDesign4 program being used is
Version 2 .6 or higher.

Overview

The new 12" Modero Touch Panels (NXT/NXD-1200V) feature dual USB
connectivity for mouse and keyboard, as well as Composite/S-Video support.
The following is a listing of the currently available 1200V panels:

• NXD-1200V (FG2251-60K) - 12" Modero Video WallMount touch
panel Kit

• NXT-1200V (FG2250-60K) - 12" Modero Video Table Top touch
panel Kit

Specifications

1200V Specifications

Dimensions (HWD): • NXD-1200V (with faceplate): 12.38" x 12.59" x 3.25"

Power: • Constant current draw: 2.1 A @ 12 VDC (stand-alone)

Minimum power
supply required:

Memory: • 256 MB on-board memory

Weight: • NXD-1200V: 10.80 lbs (4.90 kg)

LCD Parameters: • Aspect Ratio: 4:3

Viewing Angles: • Vertical: + 80° (up from center) and - 80° (down from center)

Supported Audio
Sample Rates:

Certifications: • FCC Part 15 Class B, CE, and EN 60950

Front Panel
Components:

(31.43 cm x 31.97 cm x 8.25 cm)

• NXT-1200V (Fully raised): 10.91" x 12.34" x 12.50"
(27.70 cm x 31.33 cm x 31.75 cm)

• NXT-1200V (Fully lowered): 6.77" x 12.34" x 12.50"
(17.20 cm x 31.33 cm x 31.75 cm)

• CB-TP12 (conduit/wal lbox): 11.52" x 11.60" x 3.50"
(29.27 cm x 29.47 cm x 8.89 cm)

• MB-TP12 (VESA mounting box): 12.37" x 12.58" x 3.52"
(31.42 cm x 31.95 cm x 8.94 cm)

• Startup current draw: 3.2 A @ 12 VDC (stand-alone)

• PSN4.4 Power Supply (FG423-45)

- using accessories can increase the power draw requirements.

• 128 MB Compact Flash (upgradeable to 1 GB factory programmed)

• NXT-1200V: 10.80 lbs (4.90 kg)

• Brightness (luminance): 250 cd/m2

• Channel transparency: 8-bit Alpha channel transparency

• Contrast ratio: 300:1

• Display area (HW): 183.10 mm x 247.40 mm

• Display colors: 256K (18-bit color depth)

• Dot/Pixel pitch: 0.297 mm

• Screen resolution (HV): 800 x 600 pixels

• Video formats: NTSC, PAL, and SECAM
(shown within variable-size video windows)

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,
12000Hz, 11025Hz, and 8000Hz.

• Light Sensor: Photosensitive light detector for automatic adjustment of
the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel
when panel is approached

• Front Setup Access Button: Pushbutton (grey) used to either put the
panel into a "sleep" or "wake" state

• Microphone: Used for intercom applications

• Speakers: Stereo output with a frequency response of 450 Hz - 7 KHz

Modero Video Touch Panel (G4)

1200V Specifications (Cont.)

Rear Panel
Components:

Operating /Storage
Environments:

Included
Accessories:

Other AMX
Equipment:

Panel Connectors

FIG. 2 shows the connectors located on the 1200V Modero Video panels. The
Audio/Video RJ-45 connector provides differential audio/video signals between
the touch panel and the NXA-AVB/ETHERNET. This connector routes
Composite video, Stereo (left/right) audio, and microphone audio.

Audio-Video from

NXA-AVB/ETHERNET

(CAT5)

FIG. 2 Connector layout on the 1200V Touch Panels

NXA-AVB/ETHERNET Breakout Box

FIG. 3 shows the front and rear connectors on the NXA-AVB/ETHERNET
breakout box. This breakout box can be mounted on either a horizontal flat
surface or in an equipment rack (by removing the front faceplate and securing it
to an (optional) AC-RK Rack Kit).

Composite/

S-Video

Luma

(rear)

Audio

In

FIG. 3 Connector layouts on the NXA-AVB/ETHERNET Breakout Box

• Audio/Video Connector: RJ-45 connector for communication of
differential audio/video signals

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication

• PWR Connector: 2-pin 3.5 mm mini-Phoenix connector

• Stereo Output Connector: Stereo output through a 3.5mm mini-jack

• USB Connector: Two Type A USB ports

• Mini-USB Connector: 5-pin Mini-USB connector

• Operating Temperature: 10° C (50° F) to 40° C (104° F)

• Operating Humidity: 20% to 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% to 85% RH

• Installation Kit for 12" and 17" NXD panels (KA2251-01):

- 2-pin mini-Phoenix connector (41- 5025)

- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

- One CAT5 Suppression Ferrites (04-0014)

- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192 )

• Installation Kit for 12" NXT panels (KA2251-03):

- 2-pin mini-Phoenix connector (41- 5025)

- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

- Two CAT5 Suppression Ferrites (04-0014)

• Modero Table Top Cable (CA2250-50)

- provided with all NXT Table Top panels.

• NXA-AVB/ETHERNET Breakout Box (FG2254-10)

• CB-TP12 Conduit/Wallbox (FG031-10)

• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)

• Kensington Lock Bracket (FG2259-10) (optional only with NXTs)

• MB-TP12 Universal VESA Mounting Box for NXD panels (FG031-50):

- Black metallic VESA back box (62-0031-50)

- Black plastic cover (with grommet opening) (60-0031-50)

- Strain relief grommet (45-0004-03)

- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)

- Twelve Under-cut Phillips-head screws (#6-32 x 0.500 Black)
(80-0139)

• NXA-BASE/B (FG2255)

• NXA-PCI80211G Wireless Card (FG2255-04)

• NXA-RK12 Rackmount kit for 12" Wall Mount panels (FG2904-50)

• NXT-BP (FG2250-10)

• NXT-CHG (FG2250-50)

• PSN4.4 Power Supply (12 VDC) (FG423-45)

• PSN6.5 Power Supply (12 VDC) (FG423-41)

• Upgrade Compact Flash (factory programmed with firmware):
NXA-CFTPV256M - 256 MB V/VG compact flash card (FG2116-43)
NXA-CFTPV512M - 512 MB V/VG compact flash card (FG2116-44)
NXA-CFTPV1G - 1 GB V/VG compact flash card (FG2116-45)

A

L

12VDC

ETHERNETAUDIO/VIDEO

Mic Out

PWR

Power

Ethernet

(CAT5)

S-Video Chroma

Ethernet In

Stereo
Output

Powe r In

Keyboard/Mouse

USB connectors (2)

Ethernet (to panel)

Power (to panel)

(Program Port)

Audio/Video

(to panel)

PROGRAM

Mini-USB

(front)

Wiring the NXA-AVB/ETHERNET Connectors and Cables

The inputs and outputs on the breakout box are separated into front and rear
connectors. The rear connectors are used to input external signals. The front
connectors are used to communicate signals between the
NXA-AVB/ETHERNET and a target Modero panel. FIG. 4 provides a layout of
the wiring connection both into and from the breakout box. Power should be

applied to the NXA-AVB/ETHERNET only after all connections have been

secured onto both the breakout box and the target panel.

Audio In -

Left Channel

(6-pin captive wire)

Right Channel

Audio In -

(6-pin captive wire)

Microphone Out

(4-pin captive wire)

Power

supply

Comp/Y (BNC)

C (BNC)

Ethernet

(RJ-45)

GND

In (-)

In (+)

GND
In (-)

In (+)

GND(-)
Out (-)

Out (+)

R
E
A
R

FIG. 4 NXA-AVB/ETHERNET Breakout Box connector wiring diagram

Use a standard CAT5 Ethernet cable (connected to the rear of the Table Top
Panel or to the side of the Wall Panel) to provide both communication and
10/100 network connectivity between the panel, breakout box, NetLinx Master,
and the network. The rear-panel wiring connections are described below (from
left to right):

F
R
O
N
T

NXA-AVB/ETHERNET

Breakout Box

Audio/Video
(CAT5)

Ethernet Out
(CAT5)

Powe r t o
touch panel

Wiring for Balanced Audio

Use FIG. 6 to configure a balanced audio connection.

GND

OUT-

OUT+

Ground signal

Return signal

Line signal

Balanced OUT

FIG. 6 Wiring the rear AUDIO IN and MIC OUT for use with Balanced Audio

Modero Setup and System Connection

1. Carefully remove the panel from the shipping box, peel the protective
plastic cover from the LCD and apply power to the panel.

2. From below the LCD, press the grey Front Setup Access button for
6 seconds (passing-over the Setup page) to access the Calibration setup
page and follow the on-screen instructions.

3. Press the grey Firmware Setup Access button for 3 seconds to open the
Setup page and touch the on-screen Protected Setup button.

4. Enter the panel password into the keypad (default is 1988).

5. Press the Device Number field to open the on-screen Device
Number keypad and enter a value for the panel (default is 10001).

6. Press Done when finished and press the on-screen Reboot button to
cycle power to the panel.

7. Repeat step 3 to access the Protected Setup page and touch the System
Settings button to open the System Settings page (

FIG. 7).

Master’s
connection
information

AUDIO IN: 6-pin mini-Phoenix connector, divided into left and right audio chan-

MIC OUT: 4-pin mini-Phoenix connector, divided into GND, OUT-, and OUT+

Video In BNCs: Feeds either Composite/S-Video Luma or S-Video Chroma signals

ETHERNET: RJ-45 connector routes data to the G4 touch panel through the front

PWR 2-pin mini-Phoenix connector th at connects to a PSN power supply.

nels. Each channel is divided into GND, IN+, and IN- terminal cable
connectors (2 sets of 3 for each channel).

terminal connectors.

into the NXA-AVB/ETHERNET. This feed is then redirected out to a
Modero panel through the front
Audio/Video CAT5 port.

Ethernet port. These connections use a standard CAT5 Ethernet
cable to provide communication between the target touch panel,
Breakout Box, and NetLinx Master.

This port can be used to provide power to a Modero panel by sending
it through the
NXA-AVB/ETHERNET (rear power connector through to the front
power connector).

Wiring for Unbalanced Audio

Use FIG. 5 to configure an unbalanced audio connection.

GND

IN-

IN+

GND

IN-

IN+

AUDIO IN

MIC OUT

GND

OUT-

OUT+

Left Channel

Right Channel

Microphone

Unbalanced

IN

(Jumper IN- to GND)

Unbalanced

IN

(Jumper IN- to GND)

Unbalanced

OUT

Panel’s connection information

FIG. 7 Sample System Settings page

8. Toggle the Type field to Ethernet.

9. Enter both the System Number and IP Address of the target Master.

10. Enter a valid Username and/or Password if the target Master is secured.

11. Press the Back button and then press the on-screen Reboot button to
save the changes and cycle power.

FIG. 5 Wiring the rear AUDIO IN and MIC OUT for use with Unbalanced Audio

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

©2007 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax [phone] • technical support 800.932.6993 • www.amx.com

AMX reserves the right to alter specifications without notice at any time.

93-2251-60 REV: D

11/07