AMX NXA-WAP2410A User Manual
10dBi yagi antenna
The NXA-WAP2410A 10dBi yagi antenna can be used as a bridge
between two networks or for point-to-point communications. They
e field adjustable for vertical or horizontal polarization with matched
ar
principal plane beamwidths for optimum performance in either
orientation. This design also provides improved front-to-back ratio and
sidelobe suppression that reduces interference. All models feature a
robust mounting structure for consistent performance regardless of
weather conditions.
• Field adjustable to allow vertical or horizontal polarity. Eliminates
co-channel interference from neighboring radiators. Polarity markings
molded on the antenna ensure installation in the correct orientation.
• Optional, articulating mount. Allows precise adjustment of the
antenna both vertically and horizontally.
All antennas include a robust mast mount bracket designed to
•
withstand 125 mph wind.
Matched principal plane beamwidths with excellent sidelobe
•
suppression and cross-polarization rejection of more than 20 dB.
mance
ovides superior signal quality with enhanced gain per
Pr
and minimal interference from neighboring radiators.
• 23 dB front-to-back ratio permits less physical separation on the
tower thus adding mounting flexibility at installation sites where
space is limited.
• Attractive weather-proof radome constructed of UV resistant material.
Provides robust and trouble-free use in harsh outdoor environments.
for
10dBi yagi antenna
XA-WAP2410A (FG2255-22)
N
GENERAL SPECIFICATIONS:
•
2.4 GHz ISM enclosed yagi antenna series
POLARIZATION:
• Vertical or horizontal, linar (user adjustable)
OMINAL IMPEDANCE:
N
• 50 Ohms
MOUNTING:
• Heavy duty yagi mounting bracket (included) permits mast
mounting on masts up to 2" O.D. MYK18 adjustable wall/pipe
mount allows 180° (included angle) azimuth and elevation
adjustment (sold separately).
MECHANICAL SPECIFICATIONS:
WIND SURVIVAL:
• 125 mph
LATERAL THRUST AT RATED WIND:
• 5.8 lbs.
EQUIVALENT FLAT PLATE AREA:
• 0.060 ft2
CABLE:
• 3' (914.4mm) coax
LENGTH:
• 4.5" L x 3" OD
(114mm L x 76mm OD)
WEIGHT:
• 1 lbs (0.5 kg)
ELECTRICAL SPECIFICATIONS:
FREQUENCY RANGE:
• 2400-2485 MHz
NORMAL GAIN:
• 10 dBi
HORIZONTAL BEAMWIDTH:
• 55°
VERTICAL BEAMWIDTH:
• 55°
VSWR:
• < 1.5:1
FRONT-TO-BACK RATIO:
• 23 dB
MAXIMUM POWER:
• 5 Watts
AP2410A Elevation Cut
NXA-W
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
AP2410A Azimuth Cut
NXA-W
© 2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
Loading...