AMX NXA-WAP2405A User Manual
5dBi omnidirectional antenna
The NXA-WAP2405A 5dBi omnidirectional antenna is designed to be rack
and/or ceiling mountable. Its broad elevation plane radiation patter
been shaped to dir
misdirected upper and lower sidelobe energy. The result is excellent coverage for a variety of in-building applications.
• Optimized radiation pattern focuses energy where it is needed
while suppressing upper and lower sidelobe energy.
• UL Plenum rated RG58 coax cable and UL94-V0 radome meet the
strictest safety specifications.
• Includes a 1/4-20 insert that allows for easy installation clipping to
a ceiling tile rail or the top of most racks.
ect energy where it is needed, while suppressing the
n has
5dBi omnidirectional antenna
XA-WAP2405A (FG2255-21)
N
MECHANICAL SPECIFICATIONS:
TEMPERATURE RANGE:
• -30° C to 75° C
DIMENSIONS:
• 9.8" L x 1.0" OD
(248mm L x 25.4mm OD)
CABLE:
• 12" (305 mm) RG58
WEIGHT:
• 8 oz (0.23 kg)
ELECTRICAL SPECIFICATIONS:
FREQUENCY RANGE:
• 2400-2485 MHz
NORMAL GAIN:
• 5.5 dBi
HORIZONTAL BEAMWIDTH:
• 360°
VERTICAL BEAMWIDTH:
• 32°
VSWR:
• < 1.5:1
CONNECTOR:
• Various Options
GENERAL SPECIFICATIONS:
ADOME MATERIAL:
R
• UL94-V0 plastic
POLARIZATION:
• Vertical, Linear
WIND SURVIVAL:
• 125 mph
NORMAL IMPEDANCE:
• 50 Ohms
MAXIMUM POWER:
• 5 Watts
MOUNTING METHOD:
• 1/4-20 insert of clipping to a ceiling tile rail
AP2405A Elevation Cut
NXA-W
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
AP2405A Azimuth Cut
NXA-W
© 2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
Loading...