AMX NMX-WP-2510 Datasheet

DATA SHEET

N-Series Windowing Processor, 4x1

NMX-WP-N2510 (FGN2510)

Overview

The NMX-WP-N2510 Windowing Processor functions with the N-Series family of
Video over IP Encoders and Decoders and are capable of handling multiple real­time HD streams with no video input or output connectors – using only a single
network port. This is a fundamental shift in the way ProAV technologies have
traditionally addressed windowing, but one that increases capability and flexibility
while reducing installation and support costs.

The N-Series Windowing Processor is a 1RU rack-mount appliance that connects to
an SVSI video over ip network and accepts any four video streams as input. Each
input can be cropped, scaled, and positioned according to stored presets (such as
quad, window-in-window, 3+1, etc) or in any user-defined configuration. The
combined output video stream is then routed to one or more displays at HD 1080p
or CG 1600×1200 resolution. It functions as a 4×1 windowing processor and can be
stacked to give 7×1, 10×1, 13×1, 16×1, or higher capability. A single connection to
the network provides access to all available SVSI video streams for window
selection and for output of the combined stream.

Features

• Retrofit Capable – Easily retrofits to an existing SVSi video network.

• Up to 4 Video Streams – Accepts up to four independent video streams in addition to user-defined static

backgrounds.

• Built-In Web Interface – Easy-to-use, built-in web browser interface provides pallets to manipulate each

‘window’ stream: Crop, scale and position in seconds.

• 4x1 Windowing + Stacking – 4×1 windowing with stacking capability.

• HD Output – HD 1080p or CG 1600×1200 resolution output.

• Audio Matrix Switch – Built-in audio matrix switch allows selection of any audio stream for Windowing

Processor output.

© 2015 AMX. All rights reserved.

Specifications

VIDEO

Signal Types

Network video over Ethernet via RJ45

Input Resolutions

Input Stream

vertical resolution of 1080

Note

Input resolutions supported @60Hz refresh rates
are also supported @59.94Hz.

Output Resolutions

HD Up to 1080p60.

LATENCY

720p

112 ms

1080p

196 ms

PORTS

Power

One 120 Volt AC power input

P0-P2

8-wire RJ45 female.10/100/1000 Mbps

Ethernet switch ports.

U0-U3

8-wire RJ45 female.

(Required for uncompressed video.)

CONTROLS AND INDICATORS – FRONT PANEL

RESET button

Recessed pushbutton. Press to initiate a 'warm restart'

to factory default settings).

POWER LED

On solid (green) when operating power is supplied (via
local power supply).

STATUS LED

On flashing (green) when there is software activity.

Diagnostic LEDs

LEDs 0-3 on top row: Flashing (green) represents

software status/activity.

POWER SUPPLY

Power Supply, Internal

1.0 Amp @ 120 Volts AC; 100-240 Volts AC power
supply;

ENVIRONMENTAL

• Pixel clock between 27 MHz - 150 MHz

• Minimum resolution of 720x480p

• Maximum horizontal resolution of 1920 or a

10/100/1000Base-T auto-sensing gigabit

1000 Mbps 1000Base-T gigabit Ethernet switch ports.

causing the processor to reset, but not lose power. A
reset does NOT affect the current settings unless you
press and hold one minute (which will restore the unit

activity on corresponding window.
LEDs 0-3 on bottom row: Solid (green) represents
presence of video input stream on
corresponding window.
LEDs 4 on top and bottom rows: Used for advanced
diagnostics.
LED 5 on top row: Flashing green represents output
video status/activity.
LED 5 on bottom row: Flashing green represents

2