Page 1
DATA SHEET
JPEG 2000 4K60 4:4:4 UHD Video Over IP
Decoder with PoE, KVM, AES67
NMX-DEC-N2422A (FGN2422A-SA), Stand Alone
Overview
Utilizing JPEG2000 encoding, the N2412A and N2422A encoders and decoder
(N2400 Series) deliver cinema quality video with just two frames of latency.
Furthermore, these products support HDMI 2.0 and HDCP 2.2, offering increased
compatibility with 4K sources and displays.
The N2400 Series encoders and decoders use the same control APIs, software, and
web interfaces as the existing Networked AV products, which have been optimized
to market needs as a result of years of field experience.
Common Applications
4K60 video is popular in casinos, sporting arenas, museums and other venues where high-resolution large-scale
video distribution is required. The N2400 Series is also perfect for lecture halls, university campus distribution,
active learning spaces, or anywhere viewers with a discerning eye will be expecting the beauty of 4K60.
Features
4K60 4:4:4 Support – The N2400 Series can be used to support today’s 4K content without modifying the
color space or reducing the frame rate.
Operates over Gigabit Ethernet – Distribute video over cost effective Gigabit Ethernet switches using Cat5
cable already installed in a location. This also allows for greater switching scalability vs. a solution that
depends on 10 GbE.
Low Latency – Distribute video over an IP network with just two frames of latency which is nearly
imperceptible.
HDMI 2.0 and HDCP 2.2 Support – By incorporating HDMI 2.0 and HDCP 2.2, the N2400 Series products are
compatible with all the latest 4K sources and displays.
© 2017 AMX. All rights reserved.
Page 2
PoE+ Powered – The N2400 Series can operate using PoE+ power from the network switch, simplifying
VIDEO
Video Input
Network video over Ethernet via RJ45 port or SFP port
Video Output
HDMI, DVI-D (through adapter)
Formats
HDMI, DVI-D (through adapter), HDCP content
protection support
Progressive Input Resolutions
HDMI and DVI (Progressive)
Matched to inputs or scaled to 720x480@59.94Hz
(480p59.94),1280x720@50Hz (720p50),
1280x720@59.94Hz (720p59.94), 1280x720@60Hz
(720p60), 1280x800@60Hz, 1920x1080@50Hz
(1080p50), 1920x1080@59.94Hz (1080p59.94),
1920x1080@60Hz (1080p60), 1920x1200@60Hz,
3840x2160p@30Hz (2160p30), 3840x2160p@60 Hz
(2160p60)
AUDIO
Input Signal Types
Network PCM and AES-67 audio over Ethernet via RJ45
Output Signal Types
Embedded audio on DVI-D or HDMI (through adapter)
HDMI Audio Formats
8ch PCM
Analog Audio Format
Stereo 2-channel
Digital-to-Analog Conversation
16-bit 48 kHz (matched to Encoder settings)
LATENCY
Latency
Note
Note: To calculate an end-to-end latency value, add
the given Decoder latency (shown above) to your
Encoder’s latency (which is provided in the Encoder’s
Specifications sheet)
COMMUNICATIONS
Ethernet
PO
10/100/1000 Mbps, auto-negotiating, auto-sensing,
full/half duplex, DHCP, Auto IP, and Static IP
P1
1 Gbps SFP port which accepts compatible fiber
transceivers or direct attach cables (fiber or copper
cabling)
PORTS
+12V 3A
One 12 Volt DC power input
P0
8-wire RJ45 female
10/100/1000 Mbps 10/100/1000Base-T auto-sensing
gigabit Ethernet switch port
POE+ Powered Device support
installation and reducing installation cost.
Native NetLinx – Simplifies integration with AMX control to reduce cost of installation.
Specifications
17-ms at 60 fps.
2 | NMX-DEC-2422A
Page 3
Provides network connection to the Encoders and
Decoders
P1
SFP port (SFP fiber transceiver or direct attach cable
not included) for JPEG2000 compressed networked AV
video
IR
2-pin terminal Phoenix connector
Provides Infrared (IR) output only (33-60 kHz; typically
39 kHz). Emitter may be necessary (not included)
RS232
3-pin terminal Phoenix connector
Provides a serial control interface. Full duplex
communication. Available terminal speed settings:
9600-115200 baud rate
AUDIO
5-pin terminal Phoenix connector
Provides user-selectable balanced/unbalanced input.
Dedicated audio input
HDMI OUT
HDMI video output
USB connectors (front panel)
USB-B control input and two USB-A control inputs
IR IN (front panel)
3-pin terminal Phoenix connector
Provides Infrared (IR) input only (33-60 kHz; typically
39 kHz). Receiver required (not included)
CONTROLS AND INDICATORS – FRONT PANEL
RESET Button
Recessed pushbutton
Press to initiate a 'warm restart' causing the processor
to reset, but not lose power. A reset does NOT affect
the current settings
ID Button
Recessed pushbutton
Press to send a notification out on the network to
identify the unit (the notification causes a pop-up
dialog in N-Able and N-Command)
POWER LED
On solid (green) when operating power is supplied (via
PoE or local power supply)
This activity is also shown by the PWR LED on the rear
panel
STATUS LED
On flashing (green) when there is software activity
This activity is also shown by the STAT LED on the rear
panel
CONTROLS AND INDICATORS – REAR PANEL
PWR LED
Same as POWER LED described above
HDMI LED
On (green) when there is a connection to a valid video
source
STAT LED
Same as STATUS LED described above
STRM LED
On (green) when the unit is streaming video
POWER SUPPLY
3 | NMX-DEC-2422A
Page 4
Power Supply, External, Not Included
3.0 Amp @ 12 Volts DC; 100-240 Volts AC power
supply; not included in shipment. NMX-ACC-N9313
(FGN9313)
Power over Ethernet (PoE+), External
Can be powered via a PoE+-capable switch or other
equipment with a PoE+ source
Conforms to IEEE 802.3at Type 2
GENERAL
Dimensions (HWD)
1.05” x 7.888” x 5” (2.67 cm x 20.04 cm x 12/7 cm)
Weight
1.54 lbs (0.68 kg)
Mounting Options
Stand alone, surface mount, wall mount, or rack
mount
Surface and wall mounting requires (not included):
•NMX-ACC-N9101 (FGN9101), Mounting Wings for
SVSI N-Series Encoders and Decoders
Rack mounting requires one of the following (not
included):
•NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two
Side-by-Side for SVSI N-Series Encoders and Decoders
Regulatory Compliance
FCC, CE, and NTRL
Recommended Accessories
•NMX-ACC-N9101 (FGN9101), Mounting Wings for
SVSI N-Series Encoders and Decoders
•NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two
Side-by-Side SVSI N-Series Encoders and Decoders
About AMX by HARMAN
Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of
managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital signage and technology
management. AMX systems are deployed worldwide in conference rooms, classrooms, network operation/command centers, homes, hotels,
entertainment venues and broadcast facilities, among others. AMX is part of the HARMAN Professional Group, the only total audio, video, lighting, and
control vendor in the professional AV market. HARMAN designs, manufactures and markets premier audio, video, infotainment and integrated control
solutions for the automotive, consumer and professional markets. Revised 3.30.17. ©2017 Harman. All rights reserved. Specifications subject to change.
www.amx.com | +1.469.624.7400 |800.222.0193
4 | NMX-DEC-2422A
Loading...