© 2017 AMX. All rights reserved.
DATA SHEET
N2300 Series N2315 Networked AV Wallplate
4K Encoder
NMX-ENC-N2315-WP-BL (FGN2315-WP-BL), Black
NMX-ENC-N2315-WP-WH (FGN2315-WP-WH), White
Overview
The NMX-ENC-N2315-WP provides the excellent encoding capabilities of the NMXENC-N2312 in a 2-gang wallplate format. This encoder fits conveniently into a 2gang US back box for easy installation in a wall, floor or lectern. Connect to power
and Ethernet using a single category cable.
Any source can be sent to one or more displays by routing through layer-2 / layer-3
switches utilizing standard Cat5e cable. The NMX-ENC-N2315 includes standard
features like input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover-IP extension.
The N2300 Series provides a flexible, feature-rich, and simple-to-deploy Networked
AV solution that can be used in 4K applications with resolutions up to 4096x2160,
with support for HDCP 2.2. This motion-based wavelet codec solution delivers video
with nearly imperceptible latency allowing 4K distribution over standard gigabit
Ethernet networks.
NMX-ENC-N2315-WP | 2
Features
Wallplate Form Factor – Fits conveniently into a 2-gang US back box for easy installation in a wall, floor, or
lectern. It uses standard decor-style faceplates (not included). It is available in black or white and has an
industrial design that blends well into commercial installations.
Low Latency – With 1 frame of latency for encode plus decode (34 ms for 4K30 and 17 ms for 1080p60), the
N2300-Series offers video distribution with nearly imperceptible latency.
HDMI 2.0 and HDCP 2.2 Support - By incorporating HDMI 2.0 and HDCP 2.2, the N2300-Series products are
compatible with all the latest 4K sources and displays.
PoE Powered - only requires a single category cable for power and audio/video transport, which greatly
simplifies the installation requirements.
Native NetLinx – Simplifies integration with AMX control to reduce cost of installation.
Design Flexibility – Start as small as 1x1 and grow the system in increments of single sources and devices by
simply adding additional encoders and decoders.
Specifications
VIDEO
Digital Video Input
HDMI 2.0, DVI-D* (through adapter), Dual-Mode
DisplayPort (DP++)*
*These signal types are supported through a passive
adapter
Analog Video Input
HD-15 VGA
Video Output
Network video over Ethernet via RJ45 port or SFP via
1G SFP port
Formats
HDMI 2.0, DVI-D (through adapter), Dual-Mode
DisplayPort (DP++), HDCP 2.2 content protection
support, RGBHV
*DVI-D and Dual-Mode DisplayPort (DP++) are
supported through a passive adapter
Progressive Input Resolutions
Supports 4K30 4:2:0 and most common HD resolutions
up to 1920x1200
See NMX-ENC-N2312 Installation Manual for all
supported resolutions
HDMI and DVI (Progressive)
•Pixel clock between 27 MHz – 300MHz
•Minimum resolution of 720x480p60
•Maximum horizontal resolution of 4096 or a vertical
resolution of 2160*
•Common acceptable resolutions include:
720x480p60 – 480p, 720x576@50, 800x600p60,
1024x768p60, 1280x720@60Hz - 720p60,
1600x1200@60Hz, 1920x1080@60Hz - 1080p60,
3840x2160(4:2:0)@30Hz - UHD30 aka 4K30,
4096x2160(4:2:0)@30Hz - DCI 4K30
Interlaced Input Resolutions
Supports 1080i60
See NMX-ENC-N2312 Installation Manual for all
supported resoltuions
HDMI and DVI (Interlaced)
•1920x1080@50Hz - 1080i50
•1920x1080@60Hz - 1080i60
NMX-ENC-N2315-WP | 3
Note: Interlaced resolutions will be de-interlaced if
scaled on the decoder; otherwise, the interlaced signal
will pass through to the display
Analog Input Resolutions
Supports most common HD resolutions up to
1920x1200
See NMX-ENC-N2312 Installation Manual for all
supported resoltuions
VGA
•Pixel clock between 27 MHz - 165 MHz
•Minimum resolution of 640x480
•Maximum horizontal resolution of 1920 or a vertical
resolution of 1200
•Common acceptable resolutions include:
640x480p60, 720x480p60 – 480p, 720x576@50,
800x600p60, 1024x768@60Hz, 1280x720@50Hz
(720p50), 1280x720@60Hz (720p60),
1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz,
1280x1024@60Hz, 1360x768@60Hz,
1366x768@60Hz, 1400x1050@60Hz,
1440x900@60Hz, 1600x1200@60Hz,
1680x1050@60Hz, 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz
(reduced blanking)
Note: Input resolutions supported @60Hz refresh
rates are also supported @59.94Hz
The N2312 Encoder does not accept Composite or SVideo (YC)
Analog-To-Digital Conversion
8-bit 165 MHz per each of three color channels
Color Space
4:4:4 – HD (1920x1200 and lower)
LocalPlay/HostPlay
8 playlists
HostPlay
1 image/list
Note
Jumbo Frames Required
Video Wall Construction
Supported within the NMX-DEC-N2322, the N2300
Series is not compatible with SVSI Windowing
Processors at this time
Network Video Recording
Not compatible with SVSI NVR at this time
AUDIO
Input Signal Types
Embedded audio on HDMI (DVI-D through adapter) or
Analog Stereo
Output Signal Types
Ethernet
Analog Audio Formats
8ch PCM, Stereo 2-channel
Analog-To-Digital Conversion
16-bit 48 kHz
Input Signal Types
Embedded audio on HDMI (DVI-D through adapter) or
Analog Stereo
LATENCY
Latency
17-ms at 60 fps for 1920x1080 and lower resolutions
34-ms at 30 fps for 4K30
NOTE: This is the combined encode plus decode
latency. Total latency from source to screen will also
include any network latency.
Scaling adds one frame of latency (17ms at 60fps)
NMX-ENC-N2315-WP | 4
Switching
Up to 1.5s delay, not seamless
BANDWIDTH
Bandwidth
200 Mb/s (average)
Note: Bandwidths can be as high as 700 Mb/s,
depending on the resolution and the amount of
motion in the video content.
Note: Minimum bandwidth is 50 Mb/s for resolutions
<= 1080p60
COMMUNICATIONS
Ethernet - PO
10/100/1000 Mbps, auto-negotiating, auto-sensing,
full/half duplex, DHCP, Auto IP, and Static IP
Ethernet - P1
1 Gbps port which accepts compatible fiber
transceivers or direct attach cables, DHCP, Auto IP, and
static IP
HDMI
HDCP, EDID management
PORTS
P0
8-wire RJ45 female
10/100/1000 Mbps 10/100/1000 Base-T auto-sensing
gigabit Ethernet switch port
Provides network connection, network AV video, and
power to the Encoders and Decoders
HDMI IN
HDMI video input
VGA IN
DB15 analog input
USB IN - Host
USB-B host input
USB IN - Maintenance
USB-Mini maintenance input
CONTROLS AND INDICATORS – FRONT PANEL
RESET button
Recessed pushbutton.
Press to initiate a 'warm restart' causing the processor
to reset, but not lose power. A reset does NOT affect
the current settings
POWER LED
On solid (green) when operating power is supplied (via
PoE).
AUDIO LED
On (green) when audio is transmitting.
ANALOG VIDEO LEDs
On (green) when analog source is available and
transmitting.
POWER SUPPLY
Power over Ethernet
Can be powered via a PoE switch or other equipment
with a PoE source. Conforms to IEEE 802.3af Class 3
(802.3at Type 1)
Point-to-point applications between the encoder and a
decoder requires a PoE injector to power the wallplate
encoder.
Note
In order for the unit to receive Power over Ethernet
(PoE), it must be connected to a switch or other
equipment that has a PoE PSE (Power Sourcing
NMX-ENC-N2315-WP | 5
Equipment) port. Warning: Do not run wiring that is
connected to a PoE PSE port outside of the building
where the PSE resides. It is for intra-building use only.
ENVIRONMENTAL
Temperature (Operating)
32° to 104°F (0° to 40°C)
Temperature (Storage)
-22° to 158°F (-30° to 70°C)
Humidity (Operating)
10% to 90% RH (non-condensing)
Humidity (Storage)
0% to 90% RH (non-condensing)
Heat Dissipation
Up to ~26 BTU/Hr
GENERAL
Dimensions (HWD)
4.06” x 3.5” x 2.25” (10.31 cm x 8.84 cm x 5.72 cm)
Weight
.75 lb (0.34 kg)
Airflow
Natural convection via vent openings on front, back,
and top
Installation
•Mounts onto standard 2 gang US back boxes’
•Mounts into standard décor style wallplates (not
included)
Regulatory Compliance
FCC, CE, and NTRL
Recommended Accessories
PS-POE-AT-TC, High-Power PoE Injector, 802.3AT
Compliant (FG423-84)
About AMX by HARMAN
Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of
managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital signage and technology
management. AMX systems are deployed worldwide in conference rooms, classrooms, network operation/command centers, homes, hot els,
entertainment venues and broadcast facilities, among others. AMX is part of the HARMAN Profe ssional Group, the only total audio, video, lighting, and
control vendor in the professional AV market. HARMAN designs, manufactures and markets premier audio, video, infotainment and integrated control
solutions for the automotive, consumer and professional markets. Revised 5.05.17. ©2017 Harman. All rights reserved. Specifications subject to change.
www.amx.com | +1.469.624.7400 |800.222.0193
Loading...