AMX CF10 Specifications
cf10 cardframe
The CF10 CardFrame acts as mission control for the system.
When equipped as a Master
and memory, controlling interactions between internal plug-in control
cards as well as additional CardFrames, keypads, touch panels, lighting,
audio/video routing, and other controllers distributed across the PhastLink
data bus.
Housed in an elegant black enclosure, Landmark CardFrames can be
mounted on a rack or shelf.
, the CardFrame supplies onboard processing
M
CU
S
ERIAL
IR OUTPUT
CONTACT
RELAY IR INPUT AX LINK
DTMF
10baseT
OUT2
OUT1
PORT2
PORT1
OUT3
OUT4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
+12
+
5
C
1
G
ND
C
2
G
ND
C
3
GND
C4
GND
C
5
G
ND
C
6
G
ND
C
7
GND
GNDAXM AXP +12V
PROGRAM
INPUT1
INPUT3
INPUT2
PHAST HUB
DATA POWER
PORT 1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
PHAST
HUB
OUT
PHAST
HUB
IN
cf10 cardframe
PROGRAM
PLB-CF10 CARDFRAME
• Holds up to 10 control cards
• Acts as system master with Master
Control Card
• Operates interactively over high-speed
Ethernet connection to system PC with
AMX software and PLC-MCU Card
• Distributes PhastLink from 15-port
PhastLink data hub
CARD SLOTS
• 10 rear-access slots
HUB LINK
• 2 RJ-45 ports to hubs and Cardframes
PHASTLINK
• 15 RJ-45 PhastLink ports
DIP SWITCH
• Sets Cardframe device number
DIMENSIONS (HWD)
• 5.56" x 17.13" x 15.25"
(141.2 mm x 435.1 mm x 387.4 mm)
WEIGHT
• 19.8 lbs (9.0 kg) (w/o cards)
POWER
• 110/220 VAC, 50/60 Hz, 100 mA (w/o
cards)
ACCESSORIES
• PM-RAC Rack-Mount Kit,
requires 3 rack spaces (5.25")
CONTROL CARDS:
PLC-MCU4
MASTER CONTROL CARD, 4 MEG
Application: Master system processing and
memory one required per
system
PanjaLan: RJ-45 Ethernet 10baseT port
to system PC
M
emory: 4 MB flash, 4 MB SRAM
Power: 480 mA
PLC-AMX AMX EMULATION CARD
Application: Link up to 255 AMX devices
AXLink: 4-pin AMX AXlink data/power
bus
ogram: 9-pin male D-Sub programming
Pr
connector
Power:
130 mA*
PLC-DTMF
TELEPHONE INTERFACE CARD
Application: Caller ID, additional applications
with future software releases,
limit one per system
Line In: RJ-11 jack
Phone: RJ-11 jack
Audio:
RCA line-level audio in and out
Power: 35 mA
PLC-IN7 CONTACT INPUT CARD
Application: Sense closures or voltage
changes
Inputs 1-7: 7 inputs, closure or 1.6-30
VAC/DC voltage change
auto-reset fuse protected
Power:
+12 and +5 VDC power for
accessories, 1 A max
iring: Removable 16-pin screw terminal
W
Power:
25 mA*
PLC-IRIN IR INPUT CARD
Application: Accepts AMX IR commands
from up to 3 sensors
IR In 1–3: 3 inputs for industry-standard
IR sensors
Wiring: 3 3-pin screw terminals for
sensor data and power
Power: 45 mA
PLC-IROUT IR OUTPUT CARD
A
pplication: Control of IR-format sources
Ports 1-4: 4 outputs, IR or wired IR up 10
MHz
Wiring: 4 mini-phono jacks for emitter
or wired IR cable
Power: 75 mA
PLC-RL8 RELAY CARD
Application: Control closure-activated
ces
sour
Relays 1-8: 8 dry-contact relays,
1 A @ 30 VDC
Jumpers: Set relays to NC/NO operation
Wiring: 16-pin screw terminal
Power: 360 mA
PLC-SER DUAL SERIAL CARD
(RS-232, RS-422/485)
Application: Bi-directional serial control
Port 1: RS-232/422/485, 300-56,000
baud, CTS/RTS
Port 2: RS-232, 300-56,000 baud,
CTS/RTS
iring: 2 9-pin male D-Sub connectors
W
Power:
80 mA
*May need additional power to operate
connected devices
PLB-CF10 CardFrame
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
Control Cards
© 2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
Loading...