AMX AXT-CP4, AXD-CP4 User Manual

4" color touch panels
The AMX 4" Color Wall Panel (AXD-CP4) and 4" Color Tabletop Panel (AXT-CP4) deliver a simple, cost-ef
egoing features you expect from AMX.
for
Take control by navigating bright, colorful menus and pressing illuminated command buttons located below the display screen. Intelligent light and motion sensors recognize when to adjust screen brightness to help eliminate glare and will instantly tur
The AMX 4" Color W any flat surface. Just attach the optional wallbox (CB-CP4) into a surface and snap in the touch panel for simple, seamless installation.
all Panel (AXD-CP4) mounts easily to a wall, lecter
fective contr
n on the panel as you appr
ol solution – without
oach.
n or
4" color touch panels
XD-CP4: 4" COLOR WALL PANEL
A
Mounts in a wall, lectern, or any flat surface
• Illuminated, engravable control buttons Smart light sensor can adjust LCD brightness to
atch environment and turn PDA button
m
llumination on and off
i
• Smart motion sensor “wakes-up” LCD backlight
nd pushbutton illumination by sensing
a
roximity and motion
p
CD
L
• 4" Color passive-matrix LCD with a resolution of 240 x 320 pixels Visible area: 3.8 inches (9.65 cm)
OWER
P
• 320 mA @ 12 VDC
MEMORY
512 KB of SRAM and 2 MB of flash for a total of
.5 MB (2 MB available for buttons, icons,
2 bitmaps, and fonts)
DIMENSIONS (HWD)
AXD Plastic housing: 4.03" x 4.45" x 2.00"
10.24 cm x 11.30 cm x 5.08 cm)
(
• Wall Faceplate: 5.13" x 5.25" x 0.40" (13.03 cm x 13.35 cm x 1.02 cm)
• CB-CP4 Conduit/wallbox: 4.18" x 4.60" x 3.40" (10.62 cm x 11.68 cm x 8.64 cm)
NCLOSURE
E
• Metal sub-plate and bezel with black or white matte finish
• Detachable front panel faceplate
EXTERNAL BUTTONS
• 6 fixed-external backlit illuminated pushbuttons (illumination is user enabled/disabled via the pushbutton illumination feature)
BUTTON CHARACTERS
• Top row of buttons: 7 characters using a 10pt Century Gothic font
• Bottom row of buttons: 7 characters using a 7pt Century Gothic font
DETECTORS/SENSORS
• Light Detector: Photosensitive light detector for adjustment of the panel brightness
• PIR Sensor: Proximity Infrared Detector to wake the panel when movement is detected
REAR CONNECTORS
• AXlink: 4-pin bus connector for connection to the AMX Central Controller
• RS-232: DB9 male connector for data transmission or Microsoft® mouse control.
OMPATIBILITY
C
Axcess, NetLinx, and Landmark systems (AXlink
• is the most common control standard for this
ystem)
s
NSTALLATION KIT
I
4-pin AXlink data/power connector
• 4-#4-40 machine screws and threaded inserts Drywall clip set (2-drywall clamps and 2-#8 (2’
ong) screws)
l
NSTALLATION CUTOUT
I
• Cutout template for the AXD-CP4 is available as an insert in the product packaging and from
MX as a drawing. This profile provides 1:1
A
utout dimensions for the CP4 conduit/wallbox
c
OPTIONAL ACCESSORIES
• PSN2.8 Power supply (can be used on the CP4) PSN6.5 Power supply (recommended for use on
he CP4)
t
• Optional spacers and bezels for international sales CB-CP4 Conduit/wallbox (includes flanges for
nstallation to studs during the construction
i phase). The conduit/wallbox should only be mounted to a beam before a drywall is installed
pre-wall)
(
WEIGHT
4.50 lbs (2.04 kg)
AXT
-CP4: 4" COLOR TABLETOP PANEL
• Compact tabletop enclosure
• Illuminated, engravable control buttons can be dimmed
• Smart light sensor can adjust LCD brightness to match environment and turn pushbutton illumination on and off
• Smart motion sensor "wakes-up" LCD backlight and pushbutton illumination by sensing proximity and motion
LCD
• 4" Color passive-matrix LCD with a resolution of 240 x 320 pixels
• Visible area: 3.8 inches (9.65 cm)
POWER
• 320 mA @ 12 VDC
MEMORY
• 512 KB of SRAM and 2 MB of flash for a total of
2.5 MB (2 MB available for buttons, icons, bitmaps, and fonts)
IMENSIONS (HWD)
D
AXT Tabletop unit: 4.04" x 5.25" x 4.84"
• (10.26 cm x 13.34 cm x 12.30 cm)
Wall Faceplate: 5.13" x 5.25" x 0.40"
13.03 cm x 13.35 cm x 1.02 cm)
(
NCLOSURE
E
• Metal sub-plate and bezel with black or white
atte finish
m Detachable front panel faceplate
XTERNAL BUTTONS
E
• 6 fixed-external backlit illuminated pushbuttons
(illumination is user enabled/disabled via the
ushbutton illumination feature)
p
UTTON CHARACTERS
B
• Top row of buttons: 7 characters using a 10pt
Century Gothic font Bottom row of buttons: 7 characters using a 7pt
entury Gothic font
C
DETECTORS/SENSORS
• Light Detector: Photosensitive light detector for
djustment of the panel brightness
a
PIR Sensor: Proximity Infrared Detector to wake
• the panel when movement is detected
REAR CONNECTORS
• AXlink: 4-pin bus connector for connection to
the AMX Central Controller RS-232: DB9 male connector for data
transmission or Microsoft® mouse control.
COMPATIBILITY
• Axcess, NetLinx, and Landmark systems (AXlink
is the most common control standard for this system)
OPTIONAL ACCESSORIES
• PSN2.8 Power supply (can be used on the CP4)
• PSN6.5 Power supply (recommended for use on
the CP4)
• Optional spacers and bezels for international
sales
• CB-CP4 Conduit/wallbox (includes flanges for
installation to studs during the construction phase). The conduit/wallbox should only be mounted to a beam before a drywall is installed (pre-wall)
WEIGHT
• 4.53 lbs (2.05 kg)
AXT-CP4 Tabletop Panel (Rear)AXD-CP4 Conduit/wallbox (front)AXD-CP4 Color Wall Panel (front)
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE,
RICHARDSON,
TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
© 2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
Loading...