AMX AXC-REL8 User Manual
Quick Start Guide
Overview
Devices that require a simple momentary or latching contact closure can be
controlled with the AXC-REL8 Universal Eight Relay Card (FIG. 1). This
card can operate up to 8 relay-controlled functions; cards can be linked
together, allowing a larger number of functions. Adjacent relays on the card
may be selectively commoned to reduce device wiring.
FIG. 1 AXC-REL8 Universal Eight Relay Card (side view)
Specifications
The table below provides specification information for the AXC-REL8
(FG715).
Specifications
Power
Consumption:
Contact
Closures:
Relays: • Single pole double throw (SPDT).
Jumpers: • JP1: Installed between center pin and NC, relay 1 is
LEDs: • CR1 - 8: Indicates energized condition of corresponding
Contact Rating: • 1 A @ 24 VAC / 28 VDC
• 150 mA, 12 VDC
•8 per card
• Each relay is individually assignable as normally open
(NO) or normally closed (NC) via jumpers provided on the
card.
Normally Closed; installed between center pin and NO,
relay 1 is Normally Open.
• JP2: Same as JP1 for relays 2 - 8, respectively a jumper
must be in one of these locations for each relay used.
relay
• 750 mA MAX resistive load.
Connections
The table below lists the AXC-REL8 pinout connectors.
AXC-REL8
Universal Eight Relay Card
Commons
The table below lists the commons for the AXC-REL8 if installed in the On
position.
Commons
Commons Description
CO1 - 2 Connects Common #1 to Common #2.
CO2 - 3 Connects Common #2 to Common #3.
CO3 - 4 Connects Common #3 to Common #4.
CO4 - 5 Connects Common #4 to Common #5.
CO5 - 6 Connects Common #5 to Common #6.
CO6 - 7 Connects Common #6 to Common #7.
CO7 - 8 Connects Common #7 to Common #8.
Relay Status LED Indicators
The table below provides a description for the illumination of each relay
LED. Refer to FIG. 2 for a visual reference of LED locations.
Relay Status LEDs
Relay LED # Description
CR1 (top LED) Indicates the energized condition of relay 1.
CR2 Indicates the energized condition of relay 2.
CR3 Indicates the energized condition of relay 3.
CR4 Indicates the energized condition of relay 4.
CR5 Indicates the energized condition of relay 5.
CR6 Indicates the energized condition of relay 6.
CR7 Indicates the energized condition of relay 7.
CR8 Indicates the energized condition of relay 8.
Top L E D
Pinout Connectors
Pinout Description
1 Common #1
2 Contact #1
3 Common #2
4 Contact #2
5 Common #3
6 Contact #3
7 Common #4
8 Contact #4
9 Common #5
10 Contact #5
11 Common #6
12 Contact #6
13 Common #7
14 Contact #7
15 Common #8
16 Contact #8
FIG. 2 AXC-REL8 Relay status locations
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
060-004-2692 2/05 ©2005
Loading...