AMX AVB-DA-RGBHV-ST-0102 User Manual

Installation Guide
Solecis AVB-DA-RGBHV-ST-0102

Overview

The Solecis AVB-DA-RGBHV-ST-0102 1x2 RGBHV HD-15, Stereo Distribution Amplifier (FG1340-1101-02) is a high resolution wideband PC Splitter with exceptional characteristics and features second to none. With an RGB video bandwidth in excess of 350Mhz (-3dB) the AVB-DA-RGBHV-ST-0102 is the perfect choice for all presentation applications.
The AVB-DA-RGBHV-ST-0102 is capable of providing either balanced or unbalanced audio outputs.
Activity LED green = signal source present red = unit powered but not
Audio IN
(front)
(rear)
Video IN
Video OUT
connected to RGBHV source
Monitor IN
Audio OUT
FIG. 1 Solecis AVB-DA-RGBHV-ST-0102

Product Specifications

AVB-DA-RGBHV-ST-0102 Specifications
RGB Input
Number: 1
Connector: HD-15
Level: Analog
Max Level: 1V p-p
Impedance: 75 ohm
Sync Input
Type: Analogue or TTL
Impedance: 470 ohm
RGB Video Bandwidth: 300MHz -3dB
RGB Return Loss: -45dB@10MHz, -27dB@100MHz
Sync Processing: None
RGB Output
Number: 2
Connectors: HD-15
Level: Analog
Gain: Unity
Impedance: 75 ohm
AVB-DA-RGBHV-ST-0102 Specifications (Cont.)
Sync Output
Level: TTL
Gain: TTL restore
Impedance: 75 ohm
Audio: Balanced/Unbalanced audio via 3.5mm stereo socket to
Power
Input Voltage: 9V
Connector: 2.1mm DC power jack for use with included external
Power Consumption: 3W
Dimensions (HWD): 1.49” x 5.70” x 3.85” (38cm x 14.5cm x 9.8cm)
Weight: 1.5 lbs. (0.68kg)
Certifications: • CE
phoenix
power supply.
•UL
• FCC class B, part 15
• RoHS/WEEE compliant

Safety Instructions

Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment.

Liquid Spills

Do not set drinks on top of the unit or immerse the unit in liquid.

Do Not Disassemble

This device contains no user serviceable parts. All servicing must be performed by a qualified service technician.

For Safety Reasons

• Do not place the unit on an unstable surface.
• Do not use near water or sources of heat.
• Use only recommended attachments.
• Use the type of power supply as specified. Unplug the power to the unit and refer servicing to qualified personnel under the following conditions:
• If liquid has been spilled or the unit has been exposed to rain or water.
• If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
• If the unit has been dropped or the cabinet damaged.

Connections

Connect the RGBHV and Audio sources to the Input sockets on the front panel of the unit.
• The RGB inputs are 75 ohm terminated and the audio input 47Kohm termi-
nated. The video outputs are fully 75 ohm driven and the audio balanced.
• For unbalanced systems use the + and Gnd terminals.
Note: It is imperative that the input sources are fully compatible with the display and sound devices.
The unit may now be powered.

Power / Video Indication (“Active” LED)

• When the unit is powered without the RGBHV input connected, the Active
indicator will be Red.
• When a signal source is applied, the indicator will turn Green.

Video Pin Connections

FIG. 2 provides the pin layout for the HD-15 connectors:
12345
678910
1112131415
FIG. 2 RGBHV HD-15 connector
The pin configuration for the HD-15 (video) connector are as follows:
1 - RED 9 - n/c 2 - GREEN 10 - SYNC GROUND 3 - BLUE 11 - n/c 4 - n/c 12 - n/c 5 - n/c 13 - H SYNC 6 - RED GROUND 14 - V SYNC 7 - GREEN GROUND 15 - n/c 8 - BLUE GROUND
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
AMX reserves the right to alter specifications without notice at any time.
6/08
93-1340-1101-02
REV: B
Loading...