Amtek System ITABLETRFM01, ITABLETRFK01 User Manual

Wireless

Keyboard & Mouse

Using Instruction

1

Getting Started Guide

1. Install the battery:

(1) Remove the battery cover on the top.
(2) Insert the Alkaline Batteries enclosed in the package into

the battery compartment, and follow the directive marks to
insert batteries.

(3) Replace the cover carefully.

Note: Once the batteries are placed correctly, the mouse

optical LED located at the bottom will be lit up. If the
LED isn’t lit up, please remove the batteries.Recheck the
battery direction and install anew.

2. Connect the receiver:

Please connect the receiver to the USB port on the computer.
Windows 98 or hi gher o

3. Establish communication connection

After plug the receiver to your computer, the LED on the
receiver will be lit up. To press the ID button on the receiver
in first then press the button on the bottom of both mouse and
keyboard .If the receiver connects with the mouse
successfully, LED indicator on the receiver will blink
quickly and stop blinking. Same as Keyboard ID setting.

4. Important Note

° To optimize the performance of your RF reception, please

make your receiver away from electrical devices. Avoid
using your RF optical mouse on a metal surface. That may

2