AMS Online Licensing Procedure Manuals & Guides

375 Field Communicator

375 Field Communicator

ONLINE LICENSING

PROCEDURE

© 2007, Emerson Process Management
Page 1 of 9

June 2007

ONLINE LICENSING PROCEDURE

Online Licensing Procedure for the 375 Field Communicator

Advantages of Online Licensing

• Allows users to add Licenses to existing System Card electronically via the 375 Easy Upgrade
Programming Utility

• More economical than ordering a replacement System Card

• No need to send System Card to Service Center or wait for physical shipment to arrive

3 Stages of Online Licensing

• Register the 375 Field Communicator

• Order Placement

• License Download

Prerequisites

• Easy Upgrade Programming Utility (v1.6 or higher) installed

• PC with IRDA (integral or USB)

• Active Internet Connection

• 375 Field Communicator(s) running System Software v2.0 or higher

STAGE 1: Register the 375 Field Communicator.

1. From General Tab, detect your 375 Field Communicator.

Select Detect 375. For any additional communicators, select Disconnect and then Detect 375 to
connect a new unit.

Note: Step 1 must be performed using the IRDA interface with 375 Field Communicator in Listen for
PC Mode.

© 2007, Emerson Process Management
Page 2 of 9

June 2007

ONLINE LICENSING PROCEDURE

2. Select Licensing & Registration Tab

3. Select “Online” view to connect to Internet.

System Card entries may remain indefinitely or can be deleted to reduce clutter. A deleted entry can
be easily restored by connecting the System Card via IRDA. (see Step 1). Once you go online
(see Step 4), only System Cards listed in the archive will be Registered and available to the Online
Configurator.

Note: The archive will list all System Cards that have been connected via IRDA since the installation
of Programming Utility v1.6. The only exception to this is if the System Card entry has been manually
deleted.

4. Identify Current Location and select OK.

This is not the country in which you reside, but the country where you are presently located.

Note: This step will not occur if it has already been performed elsewhere since the Programming
Utility was launched.

© 2007, Emerson Process Management
Page 3 of 9

June 2007

ONLINE LICENSING PROCEDURE

5. Log-in to PartnerNet.

For those with an existing Emerson PartnerNet account, provide email address, Password, and select
Log In.

For those that do not have an Emerson PartnerNet account, or for those that have forgotten their
account password, select the appropriate link and follow prompts

6. Review Registration Update information and scroll down to Online Configurator.

If you only wish to register your 375 Field Communicator, the process is complete once you receive
the message “Registration Update Complete.”

For you want to place an Online License order, follow the steps outlined below.

© 2007, Emerson Process Management
Page 4 of 9

June 2007

ONLINE LICENSING PROCEDURE

STAGE 2: Order Placement.

7. Select desired licenses for each System Card.

To help facilitate your Online License order, an Online Configurator is available for use. The System
Cards displayed match those in the archive. Check boxes indicate which licenses are avail able for
each System Card. For your convenience, Select All and Clear All buttons are available at the
bottom of the screen.

The Online Configurator reflects our current compatibility requirements. This includes the requirement
for users to have an active Easy Upgrade license if they are ordering the F
Graphics license.

OUNDATION™ fieldbus or

8. Once you have made your desired selections, select Finish.

Selecting Finish creates supporting documentation for your order, but it does not constitute an order
nor does it commit you to an order in any way.

9. Collect data for Purchase Order.

After selecting Finish, the screen will display the information needed for your PO. Be sure to include
System Card S/N and the part number(s) ordered for each specific System Card S/N.

The information is available in three forms:

1) It can be copied directly from this page and pasted into another document

2) It can be printed by selecting the print icon

3) It can be sent through an automated text-based email to your email address.

© 2007, Emerson Process Management
Page 5 of 9

June 2007

ONLINE LICENSING PROCEDURE

10. Place Purchase Order with 375 Field Communicator Point of Sale, specifying System
Card S/N and license part numbers for each System Card.

To prevent delays in processing, it is critical that a valid part number and System Card S/N are
provided. To ensure accuracy, it is recommend that you include the PO information provided via
the Online Configurator (see Step 9)

Note: US and Canadian customers may place orders with the North American Response Center

by calling 1-800-654-7768 or emailing
should place their order via their normal 375 Field Communicator Point of Sale.

11. To receive immediate notification of licensing availability, include your email
address on the PO.

[e-mail]. All other world areas

© 2007, Emerson Process Management
Page 6 of 9

June 2007

ONLINE LICENSING PROCEDURE

STAGE 3: License Download

12. Upon notification that licenses are available for download, launch 375 Easy Upgrade
Programming Utility and proceed to the Update View of the Licensing & Registration
Tab.

If email addresses are provided in Step 11, an email notification such as this one will be provided
informing you of the license availability and instructing you how to proceed with license download.

© 2007, Emerson Process Management
Page 7 of 9

June 2007

ONLINE LICENSING PROCEDURE

13. Connect your 375 Field Communicator using “Detect 375” function.

This step must be performed using the IRDA interface with 375 Field Communicator in Listen for PC
Mode. An Internet Connection is also required.

14. Confirm that the licenses “Awaiting Download” match your PO.

If the licenses “Awaiting Download” do not match your PO, verify that System Card S/N matches what
is on the PO. If a mismatch still exists, contact your Point of Sale for resolution.

© 2007, Emerson Process Management
Page 8 of 9

June 2007

ONLINE LICENSING PROCEDURE

5. Select “Enable” to update the System Card license(s).

1

Enter “Unit Name” change as desired. This May be done in conjunction with a license update or
performed separately.

6. Verify final license change matches PO. If it does not, repeat Steps 13-16.

1

7. To add licenses to another 375 Field Communicator, select Disconnect and then

1

perform steps 13-16 for each additional communicator.

If you do not have any other units to license, you can shut down the 375 Ea
Programming Utility at this time.

u ve any problems with the online licen

yo ha sing procedures, contact 375 Technical Support

If

Emerson Process Management

Asset Optimization Division
12001 Technology Drive
Eden Prairie MN 55344 USA
T 1 [phone]

© 2007, Emerson Process Management
Page 9 of 9

The contents of this publication are presented for informational purposes only, and while every effort has
been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or
implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available on request. We reserve the right to modify or
improve the designs or specifications of our products at any time without notice.

All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Company. All
other marks are the property of their respective owners.

sy Upgrade

.