Page 1
ampire
Connect to CARPLAY-USB cable
Multimedia USB
WIFI ANTENNA
ampire
LDS INTERFACE
RGB input cable
Update adapter
Power cable
WIRING DIAGRAM LDS-A62G-CP
Optional cable
Connect to RGB output device
RED---12V output for rear view camera
ORANGE--Reverse control cable (connect to reversing light) for AVM /without reversing gridline
YELLOW---RCA Front/Rear video input(Connect to front / rear view camera/360 AVM/DVR
Connect to the Phone's original cable
Yellow---12V (BAT)
BLACK---GND
RED---ACC
White&Blue ----MMI ,connect to the ECU's pin16 (Gray&white)
Orange&Green----CAN+,connect to 20pin gateway socket's pin15
Orange&Brown----CAN+,connect to 20pin gateway socket's pin5
or 26pin gateway socket's pin6
or 26pin gateway socket's pin19
Reset Dip Switch LED
DIP SWITCH SETTING
(After changing the dip code,press "reset"or power-on again)
PIN 1,7
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 8
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
ON
OFF
NG/ Audi 2G system
NG/NG
NG/NG
Reversing gridline/Enable 360 panoramic
NG/NG
Rear view camera CVBS input / RGB input
Aftermarket rear view CAM/Original rear view CAM
Microphone cable
LCD OUT cable
(must not be extended)
Touch panel cable
BLACK---Stereo audio output
Connect to the original headunit LVDS port
Stereo audio cable
Connect to CTRL
Connect to AMI switch wire of
Microphone
connect to the LVDS ADAPATER'S video in
LVDS ADAPTER
Connect to the original
headunit's LVDS cable
Connect to the LVDS ADAPTER'S LCD IN
R
EMARK:Please keep in the AUX interface when switch the CarPlay interface
1) Long press and hold "NAV" button to switch MENU, long press"NAV" button again,exit the switch MENU.
2)Short press "Info" button to open "Siri".
3)Knob to control up/down/right/left/ok.
Loading...