PF-115LF & PF-410HLF
Speaker Cabinets
Owner’s Manual
|
PF-115LF / PF-410HLF Speaker Cabinets |
TABLE OF CONTENTS |
|
What’s in the Box |
2 |
Introduction |
2 |
Features |
2 |
Rear Panel Connector Plate |
3 |
System Block Diagrams |
3 |
Technical Specifications |
4 |
Warranty and Support |
5 |
What’s in the Box
PF-115LF or PF-410HLF Speaker Cabinet, Quick Start Guide.
Introduction
Portable. Powerful. Sexy. Ampeg designed and built the original Portaflex® Series products over 50 years ago. Today, we unveil two new Portaflex extension cabinets to meet all of your low-end needs. Embrace the rumble!
Featuring Eminence® Portaflex drivers, four removable casters, integrated side handles, black, diamond pattern tolex, and low-frequency shelf ports, these Portaflex cabinets are ideal companions for any high-powered Ampeg bass head (available separately).
Like all Ampeg products, your Portaflex cabinet is designed by musicians and built using only the best of components. Each cabinet is tested to confirm that it meets our specifications, and we believe that this cabinet is the absolute best that it can be. In order to get the most out of the cabinet, please fully read this Owner’s Manual, as well as the Important Safety Instructions included with your cabinet, before playing.
And thank you for choosing Ampeg!
Features
•Ideal companion for any high-powered Ampeg bass head (available separately)
•Loaded with Eminence speaker(s) for high quality sound
•Equipped with a high frequency horn and a 3-position switch (PF-410HLF)
•Two paralleled, 1/4" TS Input and Output jacks
•Nominal impedance: 8 Ω
•Power handling: 400W RMS (PF-115LF) and 800W RMS (PF-410HLF)
•Four removable casters
•Integrated side handles and black, diamond pattern tolex
•15 mm poplar plywood construction
•Rear shelf ported for low-frequency extension
2