Statement
Packing list
S/N
Item
Quantity
1
WIFI NVR
1pcs
2
Screw bag(4 screws for HDD)
1pcs
3
DC 12V2A power supply (for NVR)
1pcs
4
User manual
1pcs
5
WIFI IP Camera
4/8pcs
6
DC 12V1A power supply(for IPC)
4/8pcs
7
Screw bag (for IPC）
4/8pcs
8
Antenna Extension Cord
1/2(4CH/8CH)pcs
Thank you for purchasing our product! This quick user guide will talk about main usages of the
product.More information can be found on our website and the help center. This user guide may
contain inaccurate content due to hardware and software upgrade.It is subject to change without
previous notice.
Safety caution
1.Please do not put any fluid container on the product.
2.Please use the product in ventilated environment and prevent blocking the vents.
3.Please use included power supply with the product to prevent damage to the product.
4.Please use the product under its standard working temperature and humidity.(advised in this
manual or distributor’s website)
5.Dust on PCB may cause short circuit.It is suggested to clean the dust on PCB timely to make the
product work properly.
6.Please obey the regulation and policy in your country and area during the installation of this.
Out of box audit
After receiving the product,please check all products and accessording to distributor’s Package
Includes information.If any is missed or damaged,please contact the distributor.
Before installation
this product may require cabling , we suggest to test all products&parts before installation and
cabling.
NVR
1、WIFI Antenna Ports:Double antennas to WIFI range
2、WAN Port:Connect your NVR to Internet
3、VGA Port:For viewing on VGA monitor
4、HDMI Port:For viewing on HDTV
5、USB Ports:For mouse and backup
6、Power Input
IPC
1. DC Port: input power 12V 1A;
2. RJ45 Port: for matching code and wired connection between IPC and NVR. Our WIFI NVR KIT is
already matched code before leaving factory. If users need to re-match code or use wired
connection, please refer to how to add IP camera as below.
Installation Instruction of WIFI NVR KIT
Note:
Wireless NVR can’t be connected to WIFI router wirelessly at present. They can
be only connected by network cable.
Setup the System
This system is standalone with embedded Linux Operating System in the NVR.
Just like a desktop PC, need to hook a screen to the NVR to enter the OS. Any TV ,
monitor with VGA or HDMI input should work for it.
1、Install antennas for cameras and the NVR.
2、Connect a screen to the NVR via its HDMI or VGA port(HDMI and VGA cable not included)
3、Plug the NVR to power(use bigger 12V 2A power adapter
4、Plug cameras to power(use smaller 12V 1A power adapters).
5、Within seconds, you should see camera’s images on the screen.
6、Plug the mouse(included)to an USB port on back of NVR. You shall then be able to operate on
the system.
In the OS you can find fullest functionalities including live view, record, playback, video backup
and all settings.
Default ID: admin Password: none (means leaving the password empty, just click login)
Tips：To protect your privacy, please set your password at earliest convenience. Right click the
mouse→Go to System Setup→System Admin →User Management to set password.
HD install
the system may not include hard disk depending on the kit you selected. the NVR works most
3.5" SATA HDD or 2.5"SATA HDD
Steps to install a hard drive (if your system has preinstalled HDD, please skip this step)
1、Unplug your NVR from power,unscrew and remove the top cover.
2、Connect the SATA power and data cables from the NVR to the corresponding ports on your
HDD (as shown).
3、holding the hard drive and the DVR ,gently turn it over and line up the holes on the hard
drive with the holes on the NVR. using a phillips screwdriver,screw the provided screws into the
holes .assemble the cover
Steps to install a hard drive(if your system has preinstalled HDD ,please skip this step).
Record video
Record video is very easy on camera system.
1、Timing Record, set time periods you want the NVR to record. Click right button →System
Setup→Record setup→Record Plan; here you can setup periods you want the NVR to record.
Everyday 0:00:00-23:59:59 means 24×7 recording. The system records 24×7 by default when it
detects hard disk.
2、Manual Record, the shortcut to turn on record. Click right button→Manual Record; you can
turn ON or turn OFF the record of certain channels. Red dot on right above corner means manual
record is ON .
3、Motion Record. Motion Record means certain channel(s) will be recorded only when
movement is detected. Click right button→System setup→Record setup→Record Plan; by
unselecting Time and selecting Motion, the channel will record only when motion detected.
Playback video on NVR
In the NVR system, right click the mouse→Choose Video playback→Choose Manual search; you
will enter the Video Playback system. Specify channels and time, you can search out videos. Click
playback to start play record videos.
Video Backup
1、2 USB port: Plug U flash disk into the USB port of NVR. Right click on main menu→video
backup→choose backup channel→choose video mode→setup searching time→search→choose
recording file on the list→video backup (support 32G U flash disk at max. Recording file is packed
one hour per time.)
2、1 USB port: Right click on main menu→video backup→choose backup channel→choose video
mode→setup searching time→search→choose recording file on the list→video backup, insert U
flash disk within reminding 1 minute, then the system will backup recording file to U flash disk.
View on PC via IE(Internet Explorer)
1、When your PC is in same LAN with the NVR（normally means they are connected to the same
router）
Step1.Find the IP address and port# of your NVR(IP address can be found in System Setup→
Network Setup).
Step2.Enter the NVR’s IP address in your IE browser in format http://youripaddress,for
example: http://192.1.1.7(If the default WEB port 80 has been changed e.g. to 100,you’ll need
to add new port number when input IP address in the browser, for example:
http://192.168.1.7:100)
2、When your PC is out of local area network with the NVR(For example: view your home
cameras from your office PC)
Access with Device Cloud ID
Step 1. Open your Internet Explorer(IE) browser and visit:www.e-seenet.com
Step2.Input Device ID, User name and password to login.
(Device ID can be found at the right bottom corner of the NVR monitor, status should be
“ONLINE”, default User name is “admin”, and default Password is empty.)
View on Mobile
1、Download the APP “IP PRO”
You can either scan the QR-Code below to find the free mobile app, or search“IP PRO”on APP
store/Google play to find it. Download and install it. Then run the APP and spend minutes to
register an account.
2、Add the NVR system to your APP device list
Run the APP “IP PRO”, login with your account or choose Trial→Click“+”to “Add device by ID”
（find it the NVR’s Network setup, or right bottom corner on screen),Description(e.g. Home
Camera), User name (default user name is “admin”)and password(default is empty)→Submit to
get back to your device list→Click the device to view the cameras.
Tips: if you’ve set a password on your NVR system, please update your password on APP to view.
Playback on mobiles
In the IP PRO APP，while viewing live video of the system, click Playback, you will enter the
remote playback menu. The APP automatically playback camera 1, you can switch channels the
CH.
Tips: Videos in playback are HD@real time which requires very good transmission condition. We
suggest to playback in LAN. Remote playback out of LAN may not 100% work due to connection
&network condition.
MENU-DO What
Click right button you can enter the main menu; click right button again you can exit the current
menu or return.
Split screen: change status of live view. You can choose to view multiple cameras or any single
camera.
Video Manage: manage IP cameras and NVR channels
System setup: All system settings
Video playback: playback recorded videos
Video backup: backup recorded videos
Color adjust: adjust the image setting of each camera
Manual record: shortcut to change the record settings
Volume: Adjust volume of audio cameras(works only for audio cameras)
Setup Wizard: step by step guide of 1st time general settings
Fast Network: shortcut to network settings
Exit System: logout, reboot, close screen output and shut down the system
System setup
Click right button→Choose System setup; you then shall enter the menu that enables you to do
all settings related to this system.
General setup(This enables you to set)
Language
Time
Display resolution
Name each camera
Auto switch from 1 camera to another
System admin(This enables you to set)
System version
System maintenance including system upgrade
User and password management
Restore to default settings
System log
HDD informa
Record setup(This enables you to set)
Record plan for each channel video detection
Network setup(This enables you to set)
All network related settings.
Channel setup(This enables you to set)
Manage channels and cameras
Add Cameras
Before leaving factory, NVR kit is already matched code, the image will come out when the kit is
powered. Anyway, there is range limitation for the WIFI signal from NVR. When cameras are out
of this range, they can’t be connected to NVR wirelessly. Then users can use network cable to
connect cameras and NVR, as picture showed below:
Right click on main menu and click video management, and enter the interface. There are two
ways to add IPC, “ match code” and “auto add”.
Choose “auto add”, cameras will transmit video image to NVR by network cable;
If users need to re-match code, cameras will transmit video image to NVR wirelessly, and IP
address is 172.20.14.X.
Extend WIFI Range
Wireless connection is easy and convenient, but it’s not universal application. Because of the
character of WIFI, the WIFI signal will decrease when going through some obstacles. Some
methods can be applied to bypass obstacles and extend WIFI range.
1、Position the Antenna Correctly
WIFI range is like an apple and the antenna of NVR is in the center of it. WIFI signal is strong all
around the WIFI range. Antenna of NVR should be put straight up, if not, WIFI signal will be weak.
According to the signal transmission character of antenna, the antenna of cameras should
overlap or parallel to NVR WIFI range, as pictures showed below:
2、Use Antenna Extension Cord to prolong WIFI distance
Installation method of antenna extension cord
Notes:When WIFI signal is not strong enough against walls,users can take off the original antenna
and subtitute antenna extension cord. Drill a hole on the wall to let the extension cord go
through and simply it where WIFI signal is strong.
Set up cascading connection in a reasonable solution,extend wifi signal
transfer distance
Note:
1. Repeater function can’t strengthen WIFI signal for wireless NVR kit, but can extend the
distance by repeaters -- WIFI cameras.
2. Only when the repeater cameras and repeated cameras are positioned correctly, WIFI
distance will be extended.
3. Repeater function and 3 meters antenna extension cord are two methods to extend WIFI
range. Users can choose one according to real situation.
Repeater Setup
Step 1: Right click on NVR’S GUI, left click “video management”→ then left click “repeater”
Step 2: Add repeater
As picture shown below, click icon + besides channel 3, choose other channel.
Step 3: As picture shown below, it means IPC1 is connected to NVR through IPC2 and IPC3. IPC2
is connected to NVR through IPC3. IPC3 is connected to NVR directly.
Step 4: Click “Apply” and then click “refresh” to check if the setting is successful.
Delete Repeater
Move the mouse to targeted channels, left click to delete, and then click “Apply” and “OK”.
Application Example
As picture shown above, when IPCAM1 is put somewhere is out of NVR WIFI range, and there is
IPCAM2 between them with strong WIFI signal, users can put IPCAM1 close to NVR and power it,
setup IPCAM1 repeated by IPCAM2, and then install IPCAM1 to the presupposed place.
warning
Notes:
Device will not in guarantee if caused by below reason:
A.Accident;negligence;disaster; mis-operation.
B. Do not conform to the environment and conditions,such as power improper, working
temperature Too hight or too low,
lightning stroke.ect.
C.Ever be maintained by other center which not belong to the real factory.
D.Goods already sold more than 12 months.
FCC Warning Statement
1.Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between equipment and receiver
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
2. FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must be located for operating in conjunction with any other
antenna or transmitter.
Loading...