Page 1
User`s Manual
AMIKO TSC-1270
User's Manual
www.amikostb.com
1. MAIN FEATURES..................................................................................................................................... 3
2. BUTTONS AND INDICATORS .................................................................................................................. 4
3. HOW TO MEASURE ................................................................................................................................ 5
4. HOME MENU .......................................................................................................................................... 6
5. SATELLITE TV .......................................................................................................................................... 6
5.1 MEASUREMENT .................................................................................................................................... 7
5.1.1 ZOOM ............................................................................................................................................ 8
5.1.2 AUTO DISEQC .................................................................................................................................. 8
5.1.3 LNB SETTING ................................................................................................................................. 8
5.2 SAT LIST .............................................................................................................................................. 9
5.4. SPECTRUM ........................................................................................................................................ 11
5.5 ANGLE CALCULATION .......................................................................................................................... 11
5.6 SAT IDENTIFACTION............................................................................................................................. 14
5.7 DISEQC MONITOR ............................................................................................................................. 14
6.TERRESTRIAL TV .................................................................................................................................... 15
6. 1 MEASUREMENT ................................................................................................................................. 15
6.2 AUTO SCAN ....................................................................................................................................... 16
6.3 CHANNEL LIST .................................................................................................................................... 16
6. 4 SPECTRUM CHART .............................................................................................................................. 16
6.5 MULTI CHANNEL ................................................................................................................................. 16
6.6 ANT POWER...................................................................................................................................... 17
7. CABLE TV .............................................................................................................................................. 17
7.1 MEASUREMENT .................................................................................................................................. 17
7.2 AUTO SCAN ....................................................................................................................................... 18
7.3 CHANNEL LIST .................................................................................................................................... 18
7.4 SPECTRUM CHAR T .............................................................................................................................. 18
7.5 MULTI CHANNEL ................................................................................................................................ 18
7.6 TILT .................................................................................................................................................. 18
8. ANALOGUE TV ...................................................................................................................................... 19
1 / 25
Page 2
User`s Manual
8.1 MEASUREMENT .................................................................................................................................. 19
8.2 SPECTRUM ......................................................................................................................................... 20
8.3 TILT ................................................................................................................................................. 20
9. SYSTEM SETTING .................................................................................................................................. 21
11. ACCESSORIES ...................................................................................................................................... 21
12. TROUBLE SHOOTING.......................................................................................................................... 21
13. TECHNICAL SPECIFICATION ............................................................................................................... 23
Please refer to the following notes before use.
• Please read this user manual carefully to be able to safely use and maintain your meter.
•The technical specifications and operation guides in this manual are subject to changes
without notice.
• Before using the first time, please ch arge the battery for 3 hours.
•Please use the special adapter for charging attached with the meter, do not use it for
other product
• In case of any technical questions, please contact your local dealer.
2 / 25
Page 3
User`s Manual
1. MAIN FEATURES
Support DVBS/DVBS2/DVBT/DVBT2/DVBC/DVBC2/MCNS/ OPTICAL
LNB short-circuit protection and indicator.
Extremely fast and accurate with high sensitivity.
400*360 color LCD disp lay.
Database editable by user easily.
Signal lock audible notification.
Optical power level measuremen t.
Firmware can be upgraded by USB port.
Power-supply100-240V/50/60Hz 12V@1A.
Ultra-long standby, low power consumption.
Fast ch arging Li-ion battery can last around 3 hours
DVB-S/S2
Real time Spectrum-Analyzer and transponder message detected
Angle c alculation of azimu th and elevation.
Azimuth and elevation measurement.
Satellite alignment system.
Power, CNR, CBER, VBER(DVBS), LBER(DVBS2) Modulation mode display.
All DiSEqC protocol monitor based on 22KHz signal.
DiSEqC1.0, DiSEqC1.2, USALS,SCD and SCD2 supported.
Auto DiSEqC identification for DiSEqC1.0
DVB-T/T2
Power, VBER(DVBT), LBER(DVBT2) SNR and CBER display.
Spectrum an alyzer
SCOPE Display
Channel Auto Scan
DVB-C/C2/MCNS
Power, BER, PER(DVBC/MCNS), LBER(DVBC2), SNR and Symbol Rate display
Spectrum an alyzer
Channel Auto Scan
Trunk voltage measurement (AC&DC)
Tilt Display
3 / 25
Page 4
2. BUTTONS AND INDICATORS
2
○
3
○
5
○
6
○
4
○
7
○
10
○
9
○
8
○
12
○
11
○
1
○
13
User`s Manual
1. LNB Input: Signal input port for satellite. Connects directly to LNB using coaxial cable.
2. Antenna Input: Signal input port for terrestrial and cable. Connect directly to Antenna using
coaxial cable.
3. Charge Light:
Red: the battery is being charged.
Blue: the battery is full.
4. Warn Light: Flash if LNB is short connected
5. Working Light: Green: the meter is in working status
6. Function Keys: Function keys.
4 / 25
Page 5
7. Navigation Keys:
User`s Manual
/: Move focus or change value.
/: Move focus or change value
8. MEN U: Go into main menu or exit from the current menu
9. OK: Confirm
10 . : Turn the meter on/ off, press and hold for 2 seconds to power on/off
the meter.
11. Charging: Connect with the charger cord for charging the equipment.
12. Reset: Reset the meter
13. Screen Display: Show menus and parameters.
.
HOW TO MEASURE
3.
Power on the meter, select the system to measure or select system setting to set parameters for the
device in the HOME menu.
In all menus, press [/] button to navigate, press [/] button to change the value of focused
item, press [OK] button to confirm your select, edit v alue or enter a list to select a wanted item, press
[MENU] button to enter or exit menus.
How to measure satellite signal:
1. Connect the signal cable to
F-Type, Female jack.
2. Enter Satellite submenu.
3. Calculate the elevation and azimuth according to your local position in Calculate Angels
menu. Set or adjust your dish to the right position.
4. Set the LNB parameters according to your field environment in LNB Setting menu. Make
sure all the things are correct.
5. Enter to S atellite Measure menu, select the correct satellite and a normal transponder to
check the signal is locked or not.
According to all the output values, such as strength, quality, CNR and power level, you can accurate
your dish to get the best quality signal. And also you can analyzer the signal in Spectrum Ch art menu
to help you to learn the locked signal well. User can edit the satellite position and transponder in
Satellite Edit menu.
How to measure terrestrial signal:
1. Connect the signal cable to IEC-Type, Female jack first.
2. Make sure set Antenna Power to ON in System Setting menu if your antenna needs power
supply.
5 / 25
Page 6
User`s Manual
3. Analyze the signal in Terrestrial Measure menu.
4. Analyze the scope in Scope menu and the spectrum in Spectrum Chart menu.
How to measure digital cable signal:
1. Connect the s ignal cable to IEC-Type, Female jack first.
2. Analyze the signal in cable Measure menu.
3. Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.
How to measure analogue TV signal:
1. Connect the s ignal cable to IEC-Type, Female jack first.
2. Analyze the signal in Measure menu.
3. Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.
Please refer below descriptions if you want to learn all functions.
HOME MENU
4.
The meter will enter this menu first during power on. Press
[/] to switch items or [OK] to enter submenus.
Satellite TV: Submenu for DVB-S/S2 system.
Terrestrial TV: Submenu for DVB-T/T2/ISDBT
system.
Cable TV: Submenu for DVB-C/C2/MCNS system.
Analog TV: Submenu for analogue TV system.
System Setting: Submenu for system parameters setting. Such as language, auto
power off and so on.
5.
SATELLITE TV
The submenu for Satellite TV functions. User can read the p arame ters of the live signal, analyze the
spectrum chart, calculate the angles for a special satellite, edit the parameters of satellites and
monitor DiSEqC command for other DVB-S/S2 device.
6 / 25
Page 7
User`s Manual
5.1 MEASUREMENT
The device will show the strength and quality of the live signal. And also CBER,VBER,LBER,CNR,
modulator type, FEC and power level
5. 013.0°E HotBird 13E: The current
satellite. Press [/] to switch between
satellites and press [OK] to enter satellite list
to select satellite. Press [OK] button to select
the focused satellite and press [MENU] to
exit from edit menu. All the other parameters on the menu will be refreshed according to
the selected satellite.
11996-V-29900: The current transponder. Press [/] to switch between
transponders and press [OK] to enter edit. Press [/] to move curse and [/] to
change value of each focused item in edit menu.
Universal: The LNB type. Press [/] to switch between LNB types and press [OK] to
enter list to select type.
22K: The 22k output status
13V: The LNB power supply status
CNR: The CNR value of signal.
PWR: The power level of signal.
CBER: The BER before FEC value of signal.
VBER: The BER before viterbi value of signal.
Feed VOL: The LNB feed voltage.
Feed CUR: The LNB feed current.
PWR 30%: The strength of signal.
QTY 0%: The quality value of sign al.
The red face icon will change to green once the LNB input signal is locking.
Press [OK] button to pop-up list window to select.
Please edit items or enter sub-functions according to the help information.
7 / 25
Page 8
User`s Manual
5.1.1 ZOOM
This function to show signal strength and quality in big mode.
5.1.2 AUTO DISEQC
Press F4 to enter into DiSEqC 1.0 detection menu as below.
LNB SETTING
5.1.3
Press [F1] to enter LNB setting window during the curser focus on LNB
type.
013.0° E HotBird 13E: The current satellite.
Universal(9750-10600): The LNB type. Press [/] to
switch between LNB types and press [OK] to enter list to select
type.
Auto: The 22k parameter. Press [/] button to switch between Auto, Off
and On.
Auto: The power parameter of the LNB. Press [/] button to switch
between Auto, Off, 13v and 18v.
DiSEqC 1.0: The DiSEqC port setting for DiSEqC 1.0 and 1.1. Press [/]
button to switch between ports or press [OK] button to select port in the list.
Fixed: Set the motor type. Press [/] to switch between Fixed, USALS and
DiSEqC 1.2.
8 / 25
Page 9
User`s Manual
USALS Setting:
Press [OK] to enter USALS SETUP menu on Position Type if
the type sets to USALS parameters
HotBird 13E: The current satellite.
Irkutsk: Select longitude and latitude by
position name. Press [OK] to list all the positions.
Please select Customized if you want to set the longitude and the latitude manually.
52.5°N/ 104.3°E: Show the selected longitude and latitude. And you can edit the value if
Customized is selected.
Move to center: Press [OK] to move the dish to central position.
Move to position: Press [OK] to confirm to move to setting position
Diseqc 1.2 Setting:
Press [OK] to enter Diseqc 1.2 setting menu on Position
Type if the type sets to Diseqc 1.2
Move single step: Move the motor by step.
Press [/] to move to west or east
Move Continuous: Move the motor
incessantly. Press [/] to move to west or east
Move to center: Press [OK] to move to centre point
Limit east: Set the move limit to east
Limit west: Set the move limit to west
Remove Limit: Disab le all limits.
Save and Commit: Press [OK] to save current position
PWR: The strength of signal
QTY.: The quality of signal
5.2 SAT LIST
This menu list all the satellites and the transponders of each
satellite.
Press [/] buttons to move curse in list. Press [/]
to switch satellite list and transponder list.
9 / 25
Page 10
User`s Manual
Functions for satellite:
1. LNB setting
Press [F1] to edit LNB settings. Please refer to 5.1.3.
2. Add satellite
Press [F2] to add new satellites.
3. Delete satellite
Press [F3] to delete current satellite.
4. Move satellite
Press [F4] to start move satellite function, then press [/] to move the satellite in the list,
press [OK] to confirm.
5. Edit satellite
Press [OK] to enter edit satellite window as below. User can edit
name and orbit.
Functions for transponder:
1. Edit transponder
Press [OK] to edit transponder if the curser is focus on the transponder.
2. Delete transponder
Press [F3] to delete the current transponder.
3. Move transponder
Press [F4] to start move transponder in the list, then press [/] to move, press [OK] to
confirm the movement.
5.3.Multi TP
This menu show 4 transponder signal results on one screen.
Press [/] to switch focused transponder. Press [OK] to
select transponder in the transponder list window.
10 / 25
Page 11
User`s Manual
5.4. SPECTRUM
This menu will show the spectrum chart of setting frequency range on
current cable line. Press [/] to switch curser focus between Start
Frequency, End Frequency, LNB Setting and Current Frequency Mark.
22K: Show the RF 22k status. The 22K is on if the
icon is green.
13V: Show the LNB power output status.
20~50~100: The range of power level.
4530 MHz/ 100 dBuV : The current frequency curse and power level, press [/] to set
the current frequency.
03600: The start frequency of the spectrum chart.
11504: The end frequency of the spectrum chart.
Press [F1] to pop up LNB setting dialog box to set LNB parameters.
Press [/] to change current frequency if the curse is focusing on the
current frequency mark.
Press [/] to change start or end frequency of the spectrum
frequency range if the curse is focusing on the start or end frequency
icon.
Press [F3] to switch LNB power supply between 13V and 18V.
Press [F4] to switch LNB LO frequency between 9750 MHz and 10600 MHz.
Press [F2] to start to identify the current connected satellite in the saved satellite list. Set the correct
LNB parameter first and then check the signal of each satellite in the satellite list.
ANGLE CALCULATION
5.5
The elevation and azimuth of the antenna will be calculated according to the customized longitude
and latitude or the selected city. Press [OK] to enter edit mode on My Longitude or My Latitude if
Customized is selected. And press [/] to switch the focused item and press [/] to change
values for each item under edit mode.
11 / 25
Page 12
User`s Manual
010.1°E: The location of local area
50.2°N: The hemisphere of local area
31.8°: The elevation calculated by meter
168.2°: The azimuth calculated by meter
07.5°: The polarization of the LNB
Select Align and press [OK] to goto alignation menu. User can simulate the antenna right position
more directly on this menu. And the menu as folowing screen shot.
User need to adjust the attitude of the meter according to the simulated results until the current
simulated values very close to the right ones. As close as possible. Then the BLUE lines will turn
GREEN. Belowing is the graph for meter during adjust.
12 / 25
Page 13
User`s Manual
The meter must f ace to the sate llite in the sky that user is plan to find.Belowing is the figure of
aligment on this menu.
User need to adjust the attitude of the meter according BLUE arraw on the screen. The meter will
deep and the RED icon turns to GREEN if the RED icon closes to the YELLOW one. It is better to make
the two icon overlapp ing. And also values of azimuth and elevation will refresh on time according to
the current position during the whole process.
Select Compass and press [OK] to go to compass submenu. And the menu as bellowing figure.
13 / 25
Page 14
User`s Manual
5.6 SAT IDENTIFACTION
The meter will identify the satellite of current LNB connected in the saved satellite list. Set
the LNB parameter according to the connected LNB, then the meter will try to identify the
connected satellite.
5.7 DISEQC MONITOR
The meter will analyze the input DiSEqC command and show out the command data and
command meaning on the screen. Please refer to below screenshot.
14 / 25
Page 15
User`s Manual
6.TERRESTRIAL TV
User can measure the live DVB-T/T2 signal, analyze the spectrum, the multi channels on one screen,
auto scan all the saved frequencies and lis t all the locked
ones. There are six submenus: Measurement, Auto Scan,
Channel List , Spectrum chart, Multi channel and Antenna
Power.
6.
1 MEASUREMENT
The device will show SNR, CBER, VBER, power value, strength and quality of the connected live signal.
Please see below for detail.
Press [/] to switch focus curser.
: The lock status. The signal is
locking if the icon is green otherwise the
color of the icon is red.
A-048.00MHz: The channel name and frequency.
Press [OK] to pop-up channels list to help to
select channel easily.
Press [F1] to enter edit window to edit channel name and frequency.
Press [F2] to add channel.
Press [F3] to delete channel.
Press [F4] to enter zoom menu to show signal results in big mode.
DVBT-8MHz: The system type and bandwidth.
Press [OK] to pop-up bandwidth list to help to select.
----: Show the signal system, constellation mode and FEC value.
Feed VOL: The feed voltage of antenna.
Feed CUR: The feed current of antenna.
MER: The MER value of the live signal.
CBER: The CBER(BER before FEC) value of the live signal.
VBER: The VBER value of the live signal.
PWR: The power level value of the live signal.
15 / 25
Page 16
User`s Manual
Frequency Offset: The frequency offset value.
PWR 30%: The power level of the live signal in percent.
QTY: The quality of the live signal in percent.
AUTO SCAN
6.2
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
6.3
CHANNEL LIST
This menu shows all the locked frequencies during Auto Scan.
4 SPECTRUM CHART
6.
This menu shows the spectrum chart of the setting
frequency range. Please see below screenshot.
Press [/] to switch between current frequency, start
frequency and end frequency:
Press [/] to change start or end frequency of the
spectrum frequency range if the curse is focusing on the
start or end frequency icon.
20~50~100: The range of the level value.
644MHz 20dBuV: The curse of the current frequency and power level. Press [/] to
change the value.
50MHz: The start frequency of the spectrum chart.
1130MHz: The end frequency of the spectrum chart.
MULTI CHANNEL
6.5
This screen show 4 channels level (dBuV) in one screen, use [/] to move focus on channel number
and press [OK] change channel number.
16 / 25
Page 17
User`s Manual
ANT POWER
6.6
User can enable/disable the antenna power supply for antenna. 5v, 12v, 18v and 24v output are
supported.
7.
CABLE TV
User can measure DVB-C live signal in this submenu. There
are total six submenus: Measurement, Auto scan, Channel
List, Spectrum chart and Tilt.
7.1
MEASUREMENT
User can read SNR, BER, PER, level, strength and quality of
the live signal.
: The lock status. The signal is
locking if the icon is green otherwise the
color of the icon is red.
S08162.00MHz:The channel name and frequency.
Press [F1] to edit enter edit window to edit name and frequency.
Press [F2] to add channel.
Press [F3] to delete current channel.
Press [OK] to pop-up channel list to help to select channel easily.
17 / 25
Page 18
User`s Manual
DVBC-8MHz: The cable system and bandwidth.
Press [OK] to pop-up window to help to select.
AC VOL: The main line AC/DC voltage.
Press [F4] to switch between DC and AC measurement.
CBER: The CBER value of the live signal.
MER: The MER of the live signal.
VBER: The VBER of the live signal.
PWR: The power level value of the live signal.
Frequency Offset: The frequency offset value.
PWR 30 %: The power level value of the connected signal in percent.
QTY: The quality value of the connected signal in percent.
AUTO SCAN
7.2
The meter will sc an all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
7.3
CHANNEL LIST
This menu shows all the locked frequencies during Auto
Scan.
7.4
SPECTRUM CHART
Please refer to 6.4.
7.5
MULTI CHANNEL
Please refer to 6.5
7.6
TILT
This menu shows tilt of three channels` power level.
S02 114.00MHz: The channel name and
frequency. Press [/] to switch between them.
Press [/] to change the channel number
and press [OK] to pop out the channel list
window to select.
LEVEL: The power level of the first
channel
DELTA1: The delta of power level to the
first channel
18 / 25
Page 19
User`s Manual
DELTA 2: The delta of power level to
the first ch annel
8. ANALOGUE TV
User can measure analogue TV signal in this submenu.
There are total three submenus: Measurement, Tilt and
Spectrum chart.
8.1 MEASUREMENT
User can read SNR, Video and audio ratio, level, strength and
quality of the analogue TV signal in this menu.
A-045.25MHz: The channel name and frequency.
: The lock status. The signal is
locking if the icon is green otherwise the
color of the icon is red.
Press [F1] to edit enter edit window to edit name
and frequency.
Press [F2] to add channel.
Press [F3] to delete current channel.
Press [OK] to pop-up channel list to help to select channel easily
PAL-I: The analog system mode.
Press [/] to switch between system modes.
Press [OK] to pop-up list window to selec t.
----: The signal real system.
AC Vol: The main line AC/DC value.
Press [F4] to switch between DC and AC.
CNR: The CNR value of the live signal.
AVR: The video and audio ratio of signal..
PWR: The power level value of the live signal.
Frequency Offset: The frequency offset value.
19 / 25
Page 20
User`s Manual
PWR 30%: The power level value of the connected signal in percent.
QTY: The quality value of the connected signal in percent.
SPECTRUM
8.2
Please refer to 7.4
8.3 TILT
Please refer to 7.6
20 / 25
Page 21
9. SYSTEM SETTING
User`s Manual
Beep: The beep status during pressing keys or when the signal is locking.
Press [◄/►] to turn on or turn off beep.
Auto Standby: Set the time for meter to enter standby mode automatically. Press
[◄/►] to switch between Off, 10 min, 20 min, 30 min and 60 min.
Language: The language of UI. Press [◄/►] to switch between available
languages
Factory Reset: Press [OK] to display a confirm dialo g. Then select YES to do a
factory reset or select NO to cancel.
Hardware Ver: The version number of hardware.
Software Ver: The version number of software.
11.
ACCESSORIES
Power adapter, 2 RF connector, 1 CD for user manual.
12.
TROUBLE SHOOTING
1. Unable to power on: Charge the meter about 3 hours until the charge light turn blue.
2. Warning LED flashing: Antenna overload, power off the meter and check the signal cable.
After that please power on again.
3. Hung up: Press the reset button to reset the meter.
4. Can’t lock signal: Please confirm the signal c able is connected correctly and make
sure the antenna power is been set to ON if the antenna needs
power supply.
21 / 25
Page 22
User`s Manual
5. Other questions: please contact your dealer
22 / 25
Page 23
13. TE CHNICAL SPECIF ICATION
VBER (before Reed Solomon): 1E-7 – 1E-3
LBER (before BC H): 1E-9 – 1E-5
Rate(MER)
PER (Packet Error Rate): 1E-6 – 1E-2
User`s Manual
DVB-T
Bit Error Rate (BER)
CBER (before Viterbi): 1E-7 – 1E-3
Frequency range 42-1005MHz
Power level 30-100 dBμV, +/-2dB
SNR 5 - 35dB, +/-0.5dB
Bandwidth 6MHz, 7 MHz, 8 M Hz
FFT type 2k, 8k
Constellation QPSK, 16QAM, 64QAM
Viterbi rate 1/2, 2/3, 3/4, 5/6, 7/8
Guard interval auto
Spectrum inversion auto
DVB-T2 / T2 Lite
Bit Error Rate (BER)
CBER (before LDPC): 1E-7 – 1E-3
Frequency range 42-1005MHz
Power level 30-100 dBμV, +/-2dB
Modulation Error
5 - 35dB, +/-0.5dB
Bandwidth 1.7MHz, 5MHz, 6MHz, 7 MHz, 8 MHz
Mode SISO, MISO, PLP single or multiple
FFT type 1k, 2k, 4k, 8k, 16k, 32k + extended bandwidth
Constellation QPSK, 16QAM, 64QAM, 256QAM
Viterbi rate 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 1/3, 2/5
Guard Interval auto
Spectrum inversion auto
DVB-C J83A
Bit Error Rate (BER)
BER (before Reed Solomon): 1E-7 – 1E-3
Frequency range 42-1005MHz
Power level 35-100 dBμV, +/-2dB
SNR 20 - 40dB, +/-0.5dB
Symbol Rate 1.7 to 7.2 Msym/s
Constellation 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Spectrum inversion auto
MCNS J83B
23 / 25
Page 24
User`s Manual
LBER (before BC H): 1E-9 – 1E-5
Frequency range
42-1005MHz
Power level
30-100 dBμV, +/-2dB
SNR
5 - 35dB, +/-0.5dB
Frequency range
950-2150MHz
Power level
35-100 dBμV, +/-3dB
CNR
0 - 20dB, +/-0.5dB
Symbole rate
333 Ksym/s to 45 Msym/s
Constellation
QPSK
Viterbi rate
1/2, 2/3, 3/4, 5/6, 6/7, 7/8
Viterbi rate
2/5, 1/2, 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Spectrum inversion
auto
Remote supply
Terrestrial
Satellite
Bit Error Rate (BER)
BER (before Reed Solomon): 1E-7 – 1E-3
PER (Packet Error Rate): 1E-6 – 1E-2
Frequency range 42-1005MHz
Power level 35-100 dBμV, +/-2dB
SNR 20 - 40dB, +/-0.5dB
Symbol Rate 5.6 Msym/s
Constellation 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Spectrum inversion auto
DVB-C2
Bit Error Rate (BER)
CBER (before LDPC): 1E-7 – 1E-3
Bandwidth 6MHz, 8 MHz
FFT type 4k
Constellation 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM
Viterbi rate 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Guard interval auto
Spectrum inversion auto
DVB-S
Bit Error Rate (BER) CBER (before Viterbi): 1E-7 – 1E-3
Spectrum inversion auto
DVB-S2
Bit Error Rate (BER) CBER (before LDPC): 1E-7 – 1E-3
Frequency range 950-2150MHz
Power level 35-100 dBμV, +/-3dB
CNR 0 - 20dB, +/-0.5dB
Symbol rate 333 Ksym/s to 45 Msy m/s
Constellation QPSK, 8PSK, 16APSK, 32APSK
24 / 25
Page 25
User`s Manual
200 mA max
400 mA max
uncommitted
Voltage 5V/13V/18 V
13/18 V
DiSEqC 1.2
DiSEqC -
control of dish motor switches committed &
Mini DiSEqC (22kHz) - 22 kHz, Tone Burst
SCD EN 50494 - 8 slots max switch committed
SCD2 EN 50607 - 32 slots max
Inputs / Outputs
RF input 75 Ohms, F (with adaptor)
Interfaces Mini USB for power input 12V@1A
Display 2.7 Inch, LCD
Battery Battery Li-ion 1400mAH@7,.4V
Charging time 3hour for 80% of capac ity
Operating temperature -5°C to 45°C
Storage temperature -10°C to 60°C
Dimensions 174 x 82x 35 mm
Weight 0.54kg
25 / 25
Loading...