Installation lnstructions
w w w . a m i c o . c o m
Surface Mount Consoles
Caution
Console installation should conform to local building codes
The installation instructions provided are for the Amico standard products. Slight
modi cations to the installations may be required. The product shipped to the job
site may not be exactly as shown on the installation drawings.
Before Installation
1. Review a copy of the nal approved shop drawing(s) and/or submittal package. These documents will
provide you with technical information speci c to your installation, such as:
- equipment types & quantities
- room numbers and location
- shop drawings of each unit type
2. Locate the console unit from the shipping boxes that you wish to install. The contents of each shipping
box are listed on the shipping document(s).
2 Amico Pipeline
Installation
1. Remove gas cover plates and devices by loosening any screws. Place everything in a safe and clean
location..
2. Remove the fascia by loosening the 2 screws (1 on each side) attaching it to the console. Place everything
in a safe and clean location.
www.amico.com 3
3. Remove any aluminum device covers that are blocking access to the back plate. This is done by loosening
the screws (typically 2 per cover) attaching it to the console box. Place everything in a safe and clean
location.
BACK PLATE
EXISTING
MOUNTING
HOLES
4. Secure the console to the wall structure. Use existing holes if it matches the stud locations or drill new
mounting holes as necessary (pictured above). Minimum two mounting locations should be used.
5. Make all necessary electrical medical gas connections.
6. After connections are made, reassemble console in the reverse order as shown in the steps outlined
above.
4 Amico Pipeline
www.amico.com 5
www.amico.com
C US LISTED
Amico Pipeline | www.amico.com
85 Fulton Way, Richmond Hill
Ontario, L4B 2N4, Canada
71 East Industry Court, Deer Park
NY 11729, U.S.A
Toll Free Tel: 1.877.264.2697
Toll Free Fax: 1.866.440.4986
Tel: 905.763.7778
Fax: 905.763.8587
Email: info@amico.com
APE-INSTAL-INSTR-SRFC-MNT-CONSL MAY 2008
Loading...