Amico Noble Custom Cabinet User Manual

Installation Instructions

Noble Series

Neonatal Intensive Care Unit (NICU)

Corporation

Before Installation

Note

The installation instructions provided are for the Amico standard products. Slight modications
to the installations may be required. Please refer to project specic submittal package for

details.

1 Amico Architectural

Installation

1.

Review a copy of the nal approved shop drawing(s) and/or submittal package. These
documents will provide you with technical information specic to your installation, such as:

- equipment types and quantities

- room numbers and location

- shop drawings of each unit type

- wiring diagrams and rough-in locations

2.

Locate the NICU unit from the shipping boxes that you wish to install. The contents of each
shipping box are listed on the shipping document(s).

www.amico.com 2

Other Installation Notes

Attach the top unit to the base using holes and hardware provided.

1.

Position the base in the desired location in the room and secure it to the wall. Access to the

2.
inside of the base is via laminate panels, all of which are removable. To remove a laminate panel,
use the suction cup tool provided to rst lift the panels vertically until resistance is felt, and then
rotate the bottom of the panel out and pull down. Be careful not to drop panel.

tool provided:

suction cup

3 Amico Architectural

Installation

Position the chase in place and secure it to the wall structure. To access to the inside of the

3.
chase, remove any laminate panels necessary.

Make all gas and electrical connections between the base, the headwall sections, and the chase.

4.

www.amico.com 4

Make all gas and electrical connections between the NICU unit and gas and electrical sources.

5.
The electrical termination may be located in the base, in the chase, or could just be loose
conduit extending outside the chase. See wiring diagrams provided with each project.

Other Installation Notes

Division 15 to make gas pipe connections from base to chase, and connect gas stubs from chase

1.
to building medical gas supply lines previously roughed in.

2.

Division 16 to do all electrical connections required.

5 Amico Architectural

www.amico.com

Amico Architectural | www.amico.com

85 Fulton Way, Richmond Hill

Ontario, L4B 2N4, Canada

71 East Industry Court, Deer Park
NY 11729, U.S.A

Toll Free Tel: [phone]
Toll Free Fax: [phone]
Tel: [phone]

Fax: [phone]
Email: [e-mail]

C US LISTED

INSTALL INSTR. NOBLE NICU 2011