Page 1
Freestanding Track: Cut Sheet
Page 2
Freestanding Track Specifications:
The free-standing track is a load bearing portable track set up that can be moved around from
room to room as required. The free-standing track is designed to be used with either the GoLift 400 or
the GoLift Portable. The stand comes as 5 separate pieces that require three different Allen keys in order
to set up.
Maximum capacity: 450lbs
Length: 10’ (custom length available upon request)
Set up time: 10 minutes
Compatible with any Amico trolley.
4 Point contact design for auto leveling on uneven flooring
Continuous charging, end stop, or handset charging compatible.
No maintenance/servicing required.
WARNING:
The stand must be used on level ground (do not use at an angle).
The lift must only be operated while the patient is on the inside of the outer frame of the stand on either
side.
Dimensions:
Page 3
How to Assemble:
Recommended: 2 People
Tools: 3/4” Allen Key
5/16” Allen Key
7/32” Allen Key
Step 1:
Line up the foot with the threaded holes on post and use the large 1” socket cap screws with square
washers to secure the foot to the posts.
Step 2:
Stand the two posts up and drop the track assembly (shown in blue) onto the two posts.
*Note: The tracks must be straight, the fit is tight.
Page 4
Step 3:
Align the mounting holes in the post and the track assembly and use the 3/8” socket cap screws on either
side to secure the track assembly to the posts. Press the caps over the screws to hide them from view.
Loading...