Amica KMG 13179 E operation manual
PAG4.0ZpZtAR / KMG 13163 E
PAG5.0ZpZtAR / KMG 13179 E
(EN) OPERATING MANUAL.........................................2
(NL) GEBRUIKERSHANDLEIDING.............................24
IO-HOB-0373 / 8068809
(01.2017 / v1)
DEAR CUSTOMER,
Your hob is exceptionally easy to use and extremely ecient. After reading these Operating
Instructions, operating the appliance will be easy.
Before being packaged and leaving the manufacturer, the appliance was thoroughly checked
with regard to safety and functionality.
Before using the appliance, please read these Operating Instructions carefully
By following these instructions carefully you will be able to avoid any problems in using the
appliance.
It is important to keep these Operating Instructions and store them in a safe place so that
they can be consulted at any time.
Follow these instructions carefully in order to avoid possible accidents.
Important!
The appliance may only be operated when you have read and understood this manual
thoroughly.
The appliance can be only used for the purpose for which it was designed. Any other
use (eg. heating rooms) is improper and can be dangerous.
The manufacturer reserves the right to introduce changes which do not aect the
operation of the appliance.
Certicate of compliance CE
The Manufacturer hereby declares that this product complies with the general requirements pursuant to the
following European Directives:
l The Low Voltage Directive 2014/35/EC,
l Electromagnetic Compatibility Directive 20014/30/EC,
l Directive on “Appliances Burning Gaseous Fuels” 2009/142/EC,
l Directive on ErP 2009/125/EC,
and therefore the product has been marked with the symbol and the Declaration of Conformity has been
issued to the manufacturer and is available to the competent authorities regulating the market.
2
TABLE OF CONTENTS
Basic Information............................................................................................2
Safety instructions..............................................................................................4
Description of the appliance............................................................................9,10
Specification..........................................................................................9,10
Installing (instructions for the installer).......................................................................11
Operation.................................................................................................................18
Cleaning and maintenance......................................................................................22
Troubleshooting.....................................................................................................23
3
SAFETY INSTRUCTIONS FOR USE
Note.The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements. Children less than 8 years of age shall be kept
away unless continuously supervised.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be performed by
children without supervision.
Note. Unattended cooking on a hob with fat or oil can be
dangerous and may result in re.
NEVER attempt to extinguish re with water. Unplug the appliance and cover ame with lid or non-combustible blanket.
Note. Risk of re: do not store anything on the cooking sur-
face.
The appliance is not intended to be operated by means of
an external timer or separate remote-control system.
Do not use steam cleaning equipment to clean the hob.
Note. Use only hob covers designed or indicated by the
appliance manufacturer as suitable or hob covers supplied
with the appliance.
Use of inappropriate covers can cause accidents.
4
SAFETY INSTRUCTIONS FOR USE
● This appliance must be installed in accordance with the applicable regulations and used
only in a well-ventilated room. Before you install and use the appliance, carefully read the
operating instructions.
● Children shall not play with the appliance.
Hot burners, grids, pots with hot liquids may cause burns to children.
● Make sure that the power cords of other equipment do not touch any hot surfaces of the
appliance.
● The power cord wall plug should be accessible after appliance has been installed.
● Do not install the appliance near the cooling equipment.
● Do not leave the appliance unattended while cooking. Oils and fats may catch re due to
overheating.
● Make sure that liquids do not boil over onto the burners.
● If there is damage to the appliance it can be reused after the defect is repaired by a trained
professional.
● Do not open the valve on the gas connection or the valve on the gas cylinder before you
make sure that all valves are closed.
● Do not allow liquids to boil over onto the burners and avoid burner contamination. Soiled
burners must be cleaned and dried immediately after cooling.
● Do not place pots directly on the burners.
● Do not place pots weighing more than 5 kg on the grid over one burner or more than 25
kg on the entire grid. Do not place one pot on two burners.
● Do not hit the knobs or burners.
● Persons without proper qualications and training must not make any alterations or repair
the appliance.
● Do not open the gas valves if you do not have a lighted match or an igniter in your hand.
● Do not extinguish the ame by blowing.
● Do not alter the appliance to allow it to be used with a dierent type of gas, or move the
appliance to another place nor make any modications in the gas supply system. These
must be carried out by a qualied installer only.
● Do not allow young children and persons who have not read the operating instructions to
use the appliance.
5
NOTES ON SAFETY
● IF YOU SUSPECT A GAS LEAK, DO NOT:
light matches, smoke, turn on or o any electrical devices (door bell, light switch, etc.) and use
other electrical or mechanical equipment that can produce an electrical or impact spark. In such a
case, immediately close the valve on the gas cylinder or the gas system shut-o valve, ventilate
the room and call a qualied person to remove the cause of the leak.
● In the event of any technical fault, immediately unplug the appliance (following the above rule) and
report the fault to the service centre to be repaired.
● Do not connect any antenna cables, e.g.radio receivers to the gas system
● In the event of ignition of gas escaping from a leaking system, immediately shut o the
gas supply using the shut-o valve.
● In the event of ignition of gas escaping from a leaking gas cylinder valve: cover the cylinder
with a wet blanket to cool it and close the valve on the cylinder. Once cooled, move the
gas cylinder out to the open air. Do not reuse the damaged gas cylinder.
● If you do not use the appliance for a few days, close the gas system main valve, and after
each use in case of a gas cylinder.
● Important! If the power cord is damaged, it should be replaced by the manufacturer or
specialist repair centre or a qualied person in order to avoid danger.
● Using the appliance for cooking and baking results in the emission of heat and moisture in
the room in which it is installed. Make sure that kitchen is well ventilated. Natural ventilation
openings or forced mechanical ventilation (exhaust hood) should be available.
● Prolonged intensive use of the appliance may require additional ventilation, for example,
opening a window or a more eective ventilation, such as increasing eciency of
mechanical ventilation, if applicable.
6
HOW TO SAVE ENERGY
Using energy responsibly
not only saves money but
also helps the environment.
So let’s save energy! And
this is how you can do it:
● Use proper pans for cooking.
Pans with thick, at bases can save up to 1/3
on electric energy. Remember to cover pans
if possible otherwise you will use four times
as much energy!
● Match the size of the saucepan to the
surface of the heating zone.
Cookware base should never be smaller than
cooking zone.
● Ensure that heating zones and pan
bases are clean.
Soils can prevent heat transfer – and repeatedly burnt–on spillages can often only be
removed by products which cause damage
to the environment.
● Do not uncover the pan too often (a
watched pot never boils!)
● Turn o the appliance in time and use
the residual heat.
For long cooking times, turn o heating zones
5 to 10 minutes before nishing cooking. This
saves up to 20% on energy.
● Do not install the hob in the imme-
diate vicinity of refrigerator / freezer.
Otherwise energy consumption increases
unnecessarily.
7
UNPACKING
DISPOSAL OF THE APPLIANCE
The appliance was packed
to protected it from damage
during of transport. After
unpacking, please dispose
of all elements of packaging
in a way that will not cause
damage to the environment.
All materials used for packaging the appliance are environmentally friendly; they are
100% recyclable and are marked with the
appropriate symbol.
Important!During unpacking, keep the packaging material (polyethylene bags, polystyrene pieces, etc.) out of reach of children.
In accordance with European
Directive 2012/19/UE and Polish legislation regarding used
electrical and electronic goods,
this appliance is marked with
the symbol of the crossed-out
waste container.
This marking indicates that the appliance
must not be disposed of together with other
household waste after it has been used.
The user is obliged to hand it over to waste
collection centre collecting used electrical
and electronic goods. The collectors, including local collection points, shops and local
authority departments provide recycling
schemes.
Proper handling of used electrical and electronic goods helps avoid environmental and
health hazards resulting from the presence of
dangerous components and the inappropriate
storage and processing of such goods.
8
DESCRIPTION OF THE APPLIANCE
Gas hob KMG* / PAG 4.0*
3
4
1
SPECIFICATION
- height 52 mm
- depth 520 mm
- width 590 mm
- weight of the appliance 10,3 kg
6
1,2,3,4 - top burners
5 - burner knobs
with igniter switch
6 - grids
2
5
The appliance is equipped with burners:
1 - large burner, heat load - 2.8 kW
2 - medium large burners, heat load - 1.8 kW
3 - small burner, heat load - 1.0 kW
Class of the appliance DE II
2ELL3B/P ,
NL II
The appliance has a pipe connection - G 1/2˝
(*) colour of the appliance: R-stainless steel, W-white
9
2L3B/P,
AT I I
2H3B/P
DESCRIPTION OF THE APPLIANCE
Gas hob KMG* / PAG 5.0*
3
1
5
SPECIFICATION
- height 52 mm
- depth 520 mm
- width 890 mm
- weight of the appliance 15 kg
4
6
1,2,3,4,5 - top burners
5 - burner knobs
with igniter switch
6 - grids
2
5
The appliance is equipped with burners:
1 - large burner, heat load - 2.8 kW
2 - wok burner, heat load - 2.8 kW
3 - medium large burners, heat load - 1.8 kW
4 - small burner, heat load - 1.0 kW
Class of the appliance DE II
2ELL3B/P ,
NL II
The appliance has a pipe connection - G 1/2''.
(*) colour of the appliance: R-stainless steel, W-white
10
2L3B/P,
AT I I
2H3B/P
INSTALLATION INSTRUCTIONS
The following instructions are intended for a qualied professional installer. These instructions
are intended to provide the most professional installation and maintenance of the appliance.
l Before you install the appliance, make sure that the local distribution conditions
(gas type and pressure) and the appliance conguration is appropriate.
l Conguration details are given on the appliance nameplate.
l This appliance is not connected to ues. The appliance must be installed and con-
nected in accordance with the current regulations. In particular, consideration must
be given to the applicable requirements for ventilation.
Requirements for the place of installation
● Kitchen should be dry, airy and well ventilated according to the applicable technical
regulations.
● The room should be equipped with a ventilation system to extract the combustion gases
outside the room. The ventilation system must include a ventilation grille or a hood. Hoods
must be installed in accordance with the accompanying operating instructions.
● The room should also allow air supply which is necessary for the correct combustion of
gas. The air supply should be not less than 2 m³/h per 1 kW of the burners power. Natural
airow from the outside may be provided or through a duct with a cross-section of at least
100 cm², or indirectly from the adjacent rooms that have ventilation ducts leading outside.
● The distance between the burners and the chimney exhaust should be at least 750 mm.
Min. 300 mm
11
hood
OKAP
Min. 420 mmMin. 420 mm
Min. 750 mm
INSTALLATION INSTRUCTIONS
4
321
590 (890)
520
52
272,00 mm
560,00 mm
490,00 mm
Install gas hob KMG* / PAG 4.0*
● prepare an opening in the worktop of a kitchen cabinet, as per the installation drawing
● Ensure a minimum clearance of 130 mm below the gas or gas-electric hob.
● connect the hob to a gas and electrical system in accordance with the instructions supplied,
● loosely attach xing brackets to the bottom of the hob,
● remove dust from the worktop, insert hob into the opening and press in rmly,
● position xing brackets (Fig.) perpendicularly to the hob's edge and tighten rmly,
● once you install the hob in the worktop, check if it operates, especially the ame failure
cut-o and igniter.
1 - Worktop
2 - Screw
3 - Bracket
4 - Hob
80,00 mm
12,00 mm
100,00 mm
12,00 mm
196,00 mm
12,00 mm
12,00 mm
400,00 mm
30,00 mm
CAUTION:
- dimensions given in brackets apply to the installation of PAG5* hobs.
- the rear edge of the worktop opening should be located at least 60 mm from the rear kitchen
wall.
12
INSTALLATION INSTRUCTIONS
4
321
590 (890)
520
52
420,00 mm 420,00 mm
484,00 mm
6,00 mm
Install gas hob KMG* / PAG 5.0*
● prepare an opening in the worktop of a kitchen cabinet, as per the installation drawing
● Ensure a minimum clearance of 130 mm below the gas or gas-electric hob.
● connect the hob to a gas and electrical system in accordance with the instructions supplied,
● loosely attach xing brackets to the bottom of the hob,
● remove dust from the worktop, insert hob into the opening and press in rmly,
● position xing brackets (Fig.) perpendicularly to the hob's edge and tighten rmly,
● once you install the hob in the worktop, check if it operates, especially the ame failure
cut-o and igniter.
1 - Worktop
2 - Screw
3 - Bracket
4 - Hob
854,00 mm
280,00 mm 280,00 mm
70,00 mm
25,00 mm
130,00 mm 130,00 mm
CAUTION:
- dimensions given in brackets apply to the installation of PAG5* hobs.
- the rear edge of the worktop opening should be located at least 60 mm from the rear kitchen
wall.
13
70,00 mm
INSTALLING
Tips for the installer
The installer must:
● Have appropriate qualication
● Read the information on the nameplate
or information sticker concerning the
type of gas, for which the appliance is
intended. This information must be com-
pared with the gas supply specication
at the place of installation.
● Check
- eectiveness of ventilation, i.e. ex-
change of air in the room.
- tightness of gas ttings.
- proper operation all the functional
components.
● For proper operation of igniters and
flame failure cut-off device, adjust
the position of the gas knobs with the
supplied washers,
- check the operation of igniters and
ame failure cut-o device,
- In the event of faulty operation, remove
the knob, make adjustments by inserting a washer (washers) on the valve pin,
- once adjusted, protect the system with
a clamping washer and replace the
knob.
● Provide the user with the gas hob installation certicate and give instructions
on the appliance operation.
The appliance has an G 1/2" threaded pipe
connector to connect it to the gas system.
The LPG (propane-butane) hob version has
the connector terminated with a hose tip ∅
8 x 1 mm.
Gas supply hose should not touch the metal
parts of the cover.
ENSURE the connections are tight.
Once you install the appliance,
check all connections for leaks, for
example using soapy water.
Do not use re to check the connections.
Carefully read the operating instructions supplied and follow all
guidelines.
CAUTION!
You are dealing with gas. The appliance must be supplied with the type
of gas specied by the manufacturer.
Only a qualied person must install the appliance.
Information on the type of gas for
which the appliance is designed is
given on the nameplate.
CAUTION!
Only a qualied person must connect the appliance to a liquid gas
cylinder or an existing system, following all safety regulations.
14
INSTALLING
Adapt the hob to a particular
type of gas
This may be performed by an installer with
the appropriate qualications only.
If the gas, which the hob will be supplied with
is dierent from the gas type specied by the
manufacturer, i.e. G20 20 mbar, replace the
burner nozzles and adjust the ame.
CAUTION!
Hobs supplied by the manufacturer are tted
with burners designed for the gas specied
on the nameplate and in the warranty.
Nameplate is located on the bottom of the
housing and lists information on the type of
gas the appliance is intended for.
In order to adapt the hob to another gas type:
• replace the nozzles (see table),
• adjust the valves for a reduced ow.
15
Loading...