OPERATING
INSTRUCTIONS
EN
GSP 530 910 W
ONLY USE THE APPLIANCE WHEN YOU
HAVE READ AND UNDERSTAND
THE OPERATING INSTRUCTIONS
IO-DWS-2002
(11.2019/1)
CONTENTS
WE ARE ENVIRONMENTALLY FRIENDLY
BASIC INFORMATION
SAFETY INSTRUCTIONS
INSTALL THE APPLIANCE
DESCRIPTION OF THE APPLIANCE
CLEANING AND MAINTENANCE
In accordance with European Directive 2012/19/EU and Polish legislation regarding used
electrical and electronic goods, this appliance is marked with the symbol of the crossed-out
waste container.
This marking indicates that the appliance must not be disposed of together with other
household waste after it has been used. The user is obliged to hand it over to waste collection centre collecting used electrical and electronic goods. The collectors, including local
collection points, shops and local authority departments provide recycling schemes. Proper
handling of used electrical and electronic goods helps avoid environmental and health hazards resulting from the presence of dangerous components and the inappropriate storage
and processing of such goods.
3
5
6
13
16
32
2
WE ARE ENVIRONMENTALLY
FRIENDLY
For many years, Amica has consistently pursued pro-ecological policy.
Concern for the environment is as important for us as the use of modern technology. That's why
we focus on energy-ecient appliances of the highest energy eciency class — A+, A++ and
A+++.
The development of technology has enabled our factories to become more environmentally
friendly – we use less and less water, electricity and less waste water and solid waste is generated in the production.
A lot of attention is paid to materials used in production. We strive to use only those that do not
contain harmful substances and make recycling and safe disposal possible after use.
3
Dear customer!
Thank you for choosing an Amica product. For years we have delivered high-quality appliances, so that household chores become a real
pleasure. Before being packaged and leaving the manufacturer, this
appliance was thoroughly checked with regard to safety and functionality. We also endeavour to make sure that modern technology in
Amica products always goes hand in hand with a unique design.
Before using the appliance, please carefully read these Operating
Instructions Follow these instruction to avoid improper use and ensure
long and reliable operation of the appliance. Learn the principles of the
safe use to avoid accidents.
Store these operating instructions in a safe place to use them for reference whenever needed. These Operating Instructions contain all the
necessary information that will make the use of your Amica appliance
simple and fun. We also encourage you to nd out more about other
Amica appliances.
We hope using your new appliance is a pleasure.
MANUFACTURER’S DECLARATION
4
BASIC INFORMATION
Carefully read the operating instructions before plugging dishwasher to a
power outlet and using the appliance. Operating instruction include tips
that will help you avoid the risk of injury and damage to the appliance.
Keep dishwasher documentation in a safe place for possible future use.
These operating instructions have been prepared for a range of appliances and some features described herein may not apply to your appliance.
MANUFACTURER’S DECLARATION
The manufacturer hereby declares that this product
meets the requirements of the following European
directives:
Low Voltage Directive 2014/35/EU,
Electromagnetic Compatibility (EMC) Directive
2014/30/EE,
Eco-design Directive2009/125/EU,
RoHS Directive2011/65/EU,
and has been marked with the symbol and issued
with a declaration of compliance made available to
market regulators.
SAFETY INSTRUCTIONS FOR USE
Before you install the
appliance
Check the appliance for transport
damage. Never install or use a damaged appliance. If in doubt, contact
your seller.
Before rst use See installation notes (below).
Refer the grounding system instal-
lation to a qualied electrician.
The manufacturer shall not be liable
for any damage arising from the use
of a non-grounded appliance.
Before using the appliance, verify
that the data given on the rating
plate matches that of local power
outlets.
Do not plug in the appliance before
and during installation.
Always use the original plug that
came with the appliance.
Do not use an extension cord to connect the appliance to the wall outlet.
Extension cords are not suciently
safe (e.g. they may overheat).
Make sure the plug is easily acces-
sible after installing the appliance.
6
SAFETY INSTRUCTIONS FOR USE
Before rst use This appliance can be used by
children aged 8 years and older
or persons with physical, mental
or sensory handicaps, or those
who are inexperienced or unfamiliar with the appliance, provided
they are supervised or have been
instructed how to safely use the
appliance and are familiar with
the associated risks. Ensure that
children do not play with the appliance. Children should not be
allowed to clean or maintain the
appliance.
Children less than 3 years of age
shall be kept away unless continuously supervised.
Child safety Do not allow children to play with
the appliance.
Dishwashing detergents can
be caustic and irritate the eyes,
mouth and throat. Read the
safety notes from detergent
manufacturer.
Never leave children unsupervised when the appliance is open.
It can contain residue detergent.
7
SAFETY INSTRUCTIONS FOR USE
Child safety Dishwasher water is not suitable
for drinking. Danger of injury from
the caustic chemicals.
When you open the door during a
programme, be careful as water
temperature is high.
To avoid injury always place long
and sharp/pointed items (e.g.
forks, knives) in the cutlery bas-
ket, pointing down, or at on the
top basket.
Daily maintenance Use the appliance for household
dishwashing only.
Do not use solvents in the appliance as there is a risk of explosion.
Do not sit or stand on the open
door and do not place any objects
on it. The device may overturn.
Do not open the door when the
appliance is operating. Hot water
or steam can be released.
Do not leave the door open, because they it can pose a hazard.
8
SAFETY INSTRUCTIONS FOR USE
In case of problems Refer repair and modications of
the appliance to qualied techni-
cians only.
In the event of problems or repairs, unplug the appliance from
the wall outlet:
Unplug the appliance by pulling
the plug,
Turn o the circuit breaker.
Do not pull the power cord, pull
the plug only. Close the water
supply.
Recommendations To save energy and water, rinse
food residue of the dishes before
loading the dishes into the dishwasher. Run the dishwasher with
full load.
Do not put dishes with food leftovers in the appliance.
Use pre-wash programme only
when needed.
Load bowls, cups and mugs bottom facing up.
Do not load in the appliance any
dishes that are not dishwasher
safe and do not load too many
dishes.
9
SAFETY INSTRUCTIONS FOR USE
Dishes and utensils that
are not suitable for
dishwashers.
Ashtrays, candles, cleaning
pastes, paints, chemicals, ferroalloys;
Forks, spoons and knives with a
handle made of wood, ivory or
Nacre, glued items, items contaminated with abrasive powders,
acid or base
Plastic dishes that are not resistant to high temperature, containers made of copper or tin;
Aluminium and silver items (may
be stained or loose lustre)
Some delicate types of glass,
porcelain with decorative prints,
as prints may fade even after the
rst wash; some crystal dishes as
they may lose their transparency,
glued silverware sensitive to high
temperatures, lead crystal glass,
chopping boards, items made
with synthetic bres;
10
Absorbent objects such as a
sponge or kitchen cloths are not
suitable for the dishwasher.
Before buying dishes in the future
make sure they are dishwasher
safe.
SAFETY INSTRUCTIONS FOR USE
RECYCLING Packaging and some parts of the
appliance are made of materials
suitable for recycling. They are
marked with the recycling symbol
and information about the type of
material.
Before using the appliance remove all packaging and dispose
of it in accordance with the regulations.
Warning!
The packaging can be dangerous
for children.
Recyclable materials can be
taken to local waste collection.
Additional information can be obtained from local authorities and
at waste disposal points.
SCRAPPING OF AN OLD
APPLIANCE
In accordance with European
Directive 2012/19/EU and Polish legislation regarding used
electrical and electronic goods,
this appliance is marked with the
symbol of the crossed-out waste
container.
At the end of its useful life, this
product must not be disposed
of with normal municipal waste.
Instead, it should be taken to an
electronic waste collection and
recycling point. It is indicated by
the symbol on the product itself,
or on the Operating Instructions
or packaging.
11
SAFETY INSTRUCTIONS FOR USE
SCRAPPING OF AN OLD
APPLIANCE
The materials used in making of
this appliance can be reused, as
indicated. By reusing or recycling
the materials or parts, you will be
playing an important part in protecting our environment.
Information about the relevant
disposal points for worn-out electrical goods is available from your
local authorities.
Thank you for your contribution to
environmental protection.
To avoid risks, prevent the appliance pending transport from
being used.
Disconnect the plug and cut the
power cord. Also damage the
door lock.
12
INSTALL THE APPLIANCE
PLACE YOUR APPLIANCE
When choosing the place of installation, make sure you will be able to easily load and remove
dishes and utensils from the dishwasher.
Do not place the appliance in a room where the temperature can fall below 0°C.
Before installing unpack the appliance following the instructions on the packaging.
When you move the appliance do not handle it by the door or control panel.
Leave some room on all sides to have convenient access to the dishwasher when cleaning.
Make sure that when you set the dishwasher you do not crush the water supply and drain hose.
Also, make sure that the appliance is not places on the power cord.
Level the appliance using the adjustable legs. Proper level ensures trouble-free opening and closing the dishwasher doors.
If the dishwasher door will not close properly, check that the appliance stands rmly on the oor, if
not, adjust using the adjustable legs.
WATER SUPPLY CONNECTION
Make sure that domestic water supply system is suitable for the dishwasher. It is recommended to
install a lter in the water supply line to avoid damage to the appliance due to impurities (such as
sand, clay, rust, etc.) that occasionally occur in water. This will also prevent accumulation of sediment after dishwashing.
WATER SUPPLY HOSE
Do not use the water supply hose from the old dishwasher. Use the new water supply
hose provided with the appliance. Before connecting, rinse the hose with water. Connect
the water supply hose directly to the water feed valve. The domestic water system pressure should be at least 0.03 MPa and up to 1 MPa. If the water pressure exceeds 1 MPa,
install pressure reducing valve.
When the connection is ready, open the valve completely and check for leaks.
For safety reasons, close the water supply tap after every wash.
13
NOTE: Aquastop water supply is used in some dishwasher models. Dangerous voltage could
min 50cm/max 110cm
min 50cm/max 110cm
occur with Aquastop. Do not cut the Aquastop water supply. Do not allow it to bend or twist
Note:
For safety reasons, close the water tap after every wash
THE DRAIN HOSE
The drain hose can be connected directly to a water drain or kitchen sink stub pipe. You can also drain
the water directly into the sink using the special bracket (if available), placing the drain hose outlet on
the kitchen sink edge. The drain hose connection should be made at least 50 cm and up to 110 cm from
the oor.
If the drain hose is longer than 4 m, dishes may not be washed properly. The manufacturer will
not be held responsible.
ELECTRICAL CONNECTION
Grounded plug must be connected to a grounded power outlet with a proper voltage. If there is no
grounding, refer this to a qualied electrician. If you operate the appliance without proper grounding,
the manufacturer does not assume any liability for the possible resulting damage.
Domestic electrical system must be protected with a 10-16A fuse.
The appliance must be supplied with 220-240 V AC. If the supply voltage is 110 V, use 3000W,
110/220 V set-up transformer to connect the appliance. Do not connect the appliance during
installation.
14
Always use the plug provided with the appliance. When you operate the appliance at lower
voltage the dishwashing eciency will deteriorate and may damage the appliance.
The power cord may only be replaced by authorized service or a qualied electrician. Failure to
comply with these rules may lead to an accident.
For safety reasons, you should always unplug the appliance after you have nished using it.
In order not to avoid electric shock, do not remove the plug from the wall outlet with wet
hands.
When you unplug the appliance from the wall outlet, always pull the plug. Never pull the power
cord.
15
FEATURES AND COMPONENTS
DESCRIPTION OF THE APPLIANCE
The features and components of the appliance (g. 1):
Conduit
Salt container
Dispenser
Bottom spray arm
Filter assembly
16
Cutlery basket
NOTE:
Figures are for illustrative purposes only Individual models may vary.
* on selected models: When you open the dishwasher door, the interior light will turn on
automatically. The appliance interior is well lit.
Cutlery rack
Upper basket
Top spray
arm
Mugs and
cups shelf
Lower basket
DISPLAY AND CONTROL PANEL
7
8
6
3 5
1 2
Operation (Button)
1. Power Press this button to turn on your dishwasher, the screen lights up.
2. Program Select the appropriate washing program, the selected program
indicator will be lit.
3. Delay Press the button to set the delay time.
4. Half load For small loads, you may use just the upper or lower rack to save
energy. Each press of the Half Load button cycles between upper
rack only and lower rack only.
When pressing this button, corresponding indicator will be lit.
5. Start / Pause To start the selected washing program or pause it when the
dishwasher is working.
6. Child lock This option allows you to lock the buttons on the control panel
(except the Power button). So children cannot accidently start the
dishwasher by pressing the buttons on the panel. To lock or
unlock the buttons on the control panel, press and hold the Alt
button and Delay button for 3 seconds simultaneously.
When pressing this button, corresponding indicator will be lit.
Display
4
9
NOTE:
Figures are for illustrative purposes only Individual models may vary.
17
7. Program
indicator
8. Delay time
indicator
9. Warning
indicator
Intensive
Heavily soiled items include pots and pans. With dried
on food.
Normal
For normally soiled loads, such as pots, plates, glasses
and lightly soiled pans.
ECO
This is the standard program suitable for normally
soiled loads, such as pots, plates, glasses and lightly
soiled pans.
Glass
For lightly soiled crockery and glass.
Rapid
A shorter wash for lightly soiled loads that do not
need drying.
90 min
For normally soiled loads that need quick wash.
To show the delay time (3h/6h/9h).
Rinse Aid
If the “ ” indicator is lit, it means the dishwasher is
low on dishwasher rinse aid and requires a rell.
Salt
If the “ ” indicator is lit, it means the dishwasher is
low on dishwasher salt and needs to be relled.
18
PREPARE THE APPLIANCE FOR OPERATION
Before rst use
1
Before using the appliance, verify that the data given on the rating plate matches that
of local power outlets.
Remove all packing materials from inside of the appliance.
Prepare special salt (water softener).
Pour water into the special salt dispenser and then add about 1.5 kg of special salt
(dishwasher salt).
Pour rinse aid into the dispenser.
The importance of water descaling
2
A dishwasher requires soft water (with low calcium content) to operate eciently. Otherwise, white residue main remain on the dishes and inside the appliance. This has a negative
impact on the quality of dishwashing, rinsing and drying. When the water ows through
the softener, ions responsible for the water hardness are removed, and the water becomes
soft, for best dishwashing results. Depending on the degree of water hardness, the ions
responsible for water hardness accumulate quickly inside the water softener. Therefore,
the water softener must be regenerated to operate with the same eciency during the
next wash. This is why special salt is used in the dishwasher.
Add special salt
3
Only use special salt intended for dishwashers.
Any other type of salt that is not intended for use in a dishwasher, especially regular
kitchen salt, will damage the water softener. In the event of damage caused by the use of
the wrong salt, the manufacturer’s warranty is void and we will not be liable for damage.
Fill with special salt before running the washing programme.
This will prevent spilled special salt or salty water from remaining on the bottom of the
device, which may cause corrosion.
1. Remove the lower basket from the appliance and unscrew the special salt dispenser cap.
2. Place the end of the funnel (included) in the hole and pour about 1.5 kg of salt.
3. Pour water into the dispenser until full. It is normal that a small amount of water spills out
of the special salt dispenser.
4. After you ll the dispenser, screw the cap on.
5. When you l the dispenser with special salt, the add salt indicator goes out.
6. Start the washing programme immediately after lling the dispenser with special salt
(the quick wash is recommended). Otherwise, salty water can damage the lters, the pump
or other important appliance components This is not covered by the warranty.
NOTE:
Fill the special salt dispenser when the special salt indicator on the control panel lights
up. Depending on the rate of salt dissolution, the special salt indicator may still be on even
after lling the dispenser.
If there is no special salt indicator on the control panel (on some models), you can estimate
when to top up the dispenser based on the number of wash cycles performed.
If some special salt spills, run the soaking programme or a quick wash programme.
Use only the special salt intended for dishwashers!
19
4
The test strip
The dishwashing eectiveness is linked to water hardness. Therefore, the appliance is
equipped with a system to reduce the hardness of the water supply. The dishwashing
eectiveness is improved when the system is set correctly. To check water hardness
contact the municipal water company or determined the water hardness using test strip
(if available).
20
Fill the detergent dispenser
5
Open the detergent dispenser ap by pressing the detergent dispenser tab to release the
lock as shown in the gure. The detergent dispenser features volume marking. Using these
markings (lines) you can measure the correct amount of detergent. The dispenser can ac-
commodate a maximum of 30g of detergent.
Open the pack with dishwasher detergent and in the case of heavily soiled dishes pour 25
cm³ detergent into the main wash compartment (A) or 15 cm³ for less soiled dishes (B). If
the dishes remained unwashed for an extended period of time or if food has dried, pour 5
cm³ detergent into the pre-wash compartment and start the dishwasher. Depending on the
amount of soil and the water hardness you may need to add more detergent.
Please note that the setting may be dierent depending on the water contamination.
Follow the manufacturer's instructions on the detergent packaging.
21
Multi-component (multitab) detergents (eg. 2-in-1, 3-in-1, etc.)
6
7
There are three types of detergents:
1. Containing phosphates and chlorine,
2. Containing phosphates and no chlorine,
3. Containing no phosphates and no chlorine.
The latest tablets are generally phosphate-free. Since phosphates have water softening
properties, we recommend adding salt to the container even if the water hardness is
only 6°dH. If you use phosphate-free detergent where water is hard, white residue may
be visible on the dishes.
You can prevent this by increasing the amount of detergent. Chlorine-free deter-
gents have less bleaching eect. Stains may not be entirely removed. Select the
programme with a higher wash temperature.
Generally, using multi-component detergents suitable results are obtained only
under certain conditions. Such detergents contain rinse aid and/or special salt in a
specic amount. It is recommended to use special salt when using multi-component
tablets.
What you should pay attention to when using these tablets.
Always check the type of detergent used and whether it is a multi-component
product.
Make sure that the detergent used is appropriate for tap water hardness.
Follow the instructions on the product packaging.
If the detergent is in the form of tablets, never place it the cutlery basket. Always
place the tablet in the detergent dispenser compartment.
The use of these detergents yields good results only in certain applications. Using
this type of detergent you should contact the manufacturer for information about
proper use.
If you use the detergent properly and dishwasher settings are correct you can save
on salt and/or rinse aid.
If dishwashing results while using 2-in-1 or 3-in-1 detergents are not satisfactory
(traces of lime scale on the dishes), please contact the detergent manufacturer.
The warranty does not cover complaints due to the use of multi-component detergents.
22
Recommended use: For best results using multi-component cleaning agents, add special
salt and rinse aid in the dishwasher and set the water hardness and amount of rinse aid to
the lowest setting.
The solubility of the detergent tablets made by dierent manufacturers can vary with
regard to temperature and time. It is therefore not recommended to use detergent tablets
in quick programmes. It is recommended to use powder detergents in quick programmes.
Always store detergents in a dry, cool place, out of reach of children. Add detergent to the
dispenser immediately before using the appliance.
Warning: If encounter another problem when using a multi-component detergent, please
contact the detergent manufacturer.
Stop using multi-component detergents
Add special salt and rinse aid to dispensers.
Set the water hardness to the highest level (6) and run an empty dishwasher.
Adjust the water hardness.
Adjust rinse aid setting.
8
Add rinse aid to the dispenser and adjust setting
Use rinse aid to prevent the formation of white water drops, lime scale spots, white
streaks that may occur on the dishes, as well as to improve the drying process. Contrary to popular belief, it not only serves to obtain a shiny dishes, but also to facilitate
drying. For this reason, make sure there is always sucient amount of rinse aid in
the dispenser.
If the rinse aid indicator on the control panel lights up, add rinse aid to the dispenser.
To add rinse aid remove the dispenser lid by unscrewing it. Add rinse aid until the
level indicator becomes dark. Replace the lid and turn it until markings align. Use
rinse aid level indicator to make sure the level is sucient. Dark colour indicates sufcient rinse aid level in the dispenser, and the light colour indicates you need to add
rinse aid to the dispenser.
You can adjust rinse aid dosage from 1 to 6. The factory setting for the rinse aid is 4.
Adjust to a higher dose if streaks remain on the dishes after drying or to a lower dose
if blue residue collets on the dishes.
Rinse-Aid indicator
Full
¾ full
½ full
¼ full (add more)
Empty
23
Warning: Use only rinse aid designed for domestic dishwashers. Wipe up spilled rinse aid
with a cloth as it will cause the formation of large amounts of foam, and thus will reduce
the dishwashing eectiveness.
Water hardness table
Water hard-
ness
1 0 ~ 5 0 ~ 9 0 ~ 6
2 6-11 10-20 7-14
3 12-17 21-30 15-21 H3 12
4 18-22 31-40 22-28
5 23-34 41-60 29-42 H5 30
6 35-55 61-98 43-69 H6 60
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use lters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 3.
German
degrees
[dH]
French
degrees
[dF]
British
degrees
[dE]
Water hardness level indicator
H1
H2
H4
Special salt
consumption
[g/cycle]
0
9
20
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5
seconds to start the water softener set
model within 60seconds after the appliance was
switched on;
3. Press the Start/Pause button to select the
proper set according to your local
environment, the sets will change in the following
sequence:
H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set up
model.
24
The use of detergents
Use a detergent for domestic dishwashers. On the
market you can nd detergent intended for dishwashers in the form of powder, gel and tablets.
The detergent must be placed in the dispenser
before starting the dishwasher. Store detergent in
a cool and dry place, out of reach of children.
Do not overll the detergent dispenser, otherwise
the detergent may not dissolve completely and
leave streaks on the dishes.
If you need more information on the detergent
used, please contact the manufacturer directly.
LOAD DISHES INTO DISHWASHER
Upper basket
The upper basket is designed for washing delicate dishes such as glasses, cups, plates, etc.
1
Dishes that are placed in the upper basket should be less soiled than dishes in the lower
basket.
You can place long forks, knives and spoons horizontally on shelves so as not to obstruct
the spray arms.
Rack
Fold the mugs and cups shelves
Fold the shelves to increase the capacity of the upper basket. You can place the glasses
2
and mugs on the shelves. Raise the cup shelf to make more space in the basket for taller
items. You can then lean the taller glasses against the shelf. It can also be removed if it is
not needed.
Fold the dishwasher basket spikes
The spikes are used to hold the plates. They can be folded, making more room for large
3
dishes.
Raise
Lower
25
DESCRIPTION OF THE APPLIANCE
Tips for using the dishwasher basket:
Adjust the upper basket
4
Type 1:
The height of the upper basket can be easily adjusted to accommodate tall pots and pans in
the upper or lower basket.
To adjust the height of the upper basket:
1
1. Extend the upper basket.
2. Remove the upper basket.
3
3. Mount the basket on the upper or lower rollers.
4. Insert the upper basket.
Type 2:
1 2
1. To raise the basket to the upper position, raise it until it is at the same height on both sides. Make
sure it is securely attached to the rails.
2. To lower the basket, push down and release the handles.
Lower position
2
4
Upper position
26
Lower basket
Put plates, bowls, pots, etc. in the lower basket. Make sure that dishes in the lower basket
5
do not block the spray arm and it can rotate freely. Place large pans and heavily soiled items
such as pots, pans, lids, dishes, etc. in the lower basket. Place dishes upside down, so
that water does not collect inside.
Place the dishes in such a way that they do not block the spray arm.
27
The standard load and test results
Capacity:
6
The upper and lower basket: 10 place settings. Set the upper basket to the upper position. Place the cups on the shelves.
Detergent/rinse aid
3+25g, in accordance with the EN 50242, IEC 436 international standards/rinse aid dose:
6
Test programme
Eco, in accordance with the EN 50242 international standard
Upper basket
Gestell
Item Cookware
1 Cups
2 Saucers
3 Glasses
4 Small salad bowls
5 Medium salad bowls
6 Large salad bowls
7 Dessert plates
8 Dinner plates
9 Soup plates
10 Oval platter
11 Cutlery basket
Lower basket
28
Tests specication according to EN 50242
Capacity —10 standard place settings
Upper basket setting — lower position
Programme — ECO
Rinse dose setting — 6
Water hardness setting — H3
Cutlery basket
Place knives and forks separately from each other, and make sure they do not touch as this may cause
poor washing results.
For best washing results place knives and forks in the cutlery basket, and make sure: they do not
touch and place objects in the middle.
Item Cutlery
1 Soup spoons
2 Forks
3 Knives
4 Tea spoons
5 Dessert spoons
6 Serving spoons
7 Forks for serving
8 Spoons for sauces
29
TURN ON THE APPLIANCE AND SELECT PROGRAMME
Turn on the appliance
1
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket rst, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page ”Product che”.
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Change programme
2
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be relled. To reset the dishwasher, follow the
instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds - the program will cancel.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.
Add dishes during the programme:
3
A forgotten dish can be added any time before the detergent dispenser opens. If
this is the case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dishwasher will start.
30
WARNING!
Be careful when opening the door during the dishwashing programme as hot
steam can be released and cause scalding.
The dishwashing programme completes
Press on/o button to turn o the appliance. Close water supply tap and open the dish-
4
washer door. Wait a few minutes before unloading the dishwasher. Allow dishes to cool. Hot
dishes are more susceptible to breakage. Also the dishes will dry.
Turn o the dishwasher
The programme is completed only when the programme indicator is on, but not ashing.
1. Press Start/Pause button to turn o the appliance.
2. Close water supply tap!
Open the door carefully.
Hot dishes are more susceptible to breakage. Before unloading the dishwasher leave the
dishes to cool for about 15 minutes.
Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes.
This will allow the dishes to cool and dry.
Unload the dishwasher
It is normal that the dishwasher interior is wet.
First remove dishes from the lower basket and then from the upper basket. This will avoid
water dripping from the upper basket on the dishes in the lower basket.
31
CLEANING AND MAINTENANCE
Clean external surfaces
1
Door and door seal
To remove food residue, clean the door gasket regularly with a soft, moist cloth.
When loading dishes into the dishwasher, food and drink residue may deposit on the sides
of the dishwasher door. These surfaces are outside the dishwasher compartment and the
water from the spray arms does not reach them. Remove any residue before closing the
door.
Control Panel
Wipe the control panel ONLY with a soft, damp cloth.
WARNING
Do NOT use any spray cleaner to prevent water ingress into the door lock and electrical
components.
Do not use any abrasive detergents or sharp cleaners on external surfaces. Some paper
towels may also leave scratches or marks on the surface.
Clean internal surfaces
Filter system
2
The lter system at the bottom of the dishwasher compartment stops coarse residue during wash cycle. This residue can cause clogging of the lters. Regularly check the condition
of the lters and rinse them under running water, if necessary. Clean the lters as follows.
NOTE:
Figures are for illustrative purposes only Filter systems and spray arms may vary in individual models.
Strainer
Main lter
Fine lter
1
2
1. Hold the strainer and turn it counter clockwise to unscrew. Lift the lter up and remove it from the
dishwasher.
2. The ne lter can be removed from the bottom of the lter assembly. The strainer can be disengaged from the main lter by gently squeezing the edges and pulling.
32
TROUBLESHOOTING
3. Larger residues can be rinsed under running water. Clean the lter completely with a soft,
clean brush.
4. Install the lters in reverse order, place the lter insert and turn clockwise as indicated by
the arrow.
WARNING
Do not overtighten the lters. Carefully replace the lters and install in place. Otherwise,
contaminants can enter the dishwasher's systems and cause clogging.
NEVER use the dishwasher without the lter assembly. Incorrect lter replacement can
reduce the appliance eectiveness and cause damage to the dishes and cutlery.
Spray arms
3
Clean the spray arms regularly. Hard water and detergents can clog the nozzles and the
spray arm slide rings.
Clean spray arms:
1. To remove the upper spray arm, hold the nut in place and turn the arm counter clockwise.
2. To remove the lower spray arm, pull the arm up.
3. Clean the spray arms with a soft brush in warm soapy water. Rinse the arms and install in the appliance.
33
Clean the dishwasher
Frost protection
4
In winter, the dishwasher must be protected against freezing temperature. After each wash:
1. Disconnect the dishwasher from power.
2. Turn o the water supply and disconnect the water inlet hose from the water valve.
3. Drain the water from the inlet hose and the water valve. (Collect the water in a bowl)
4. Reconnect the water inlet hose to the water valve.
5. Remove the lter and use a sponge to collect the water from the bottom of the dishwasher.
After each wash
After each wash, close the water supply to the appliance and leave the door slightly ajar, so
that moisture and odours are not trapped inside.
Unplug the appliance
Unplug the appliance from the wall outlet before any cleaning and maintenance.
Do not use solvents or abrasive detergents.
Do not use solvents or abrasive detergents to clean the outer parts and the rubber seals of
the dishwasher. Use only cloths and warm soapy water.
To remove stains from the inside use a cloth dampened with water and a little vinegar or
cleaning detergent intended specically for dishwashers.
If the dishwasher is not used for a long time
It is recommended to run the washing programme with an empty dishwasher, then unplug
the appliance from power, close the water supply and leave the door slightly ajar. This protects the gaskets and prevents the formation of unpleasant odours in the appliance.
Move the appliance
If the appliance needs to be moved, try to keep it in an upright position. If absolutely unavoidable, you can rest the appliance on the back wall.
34
ERROR CODES AND TROUBLESHOOTING
In the event of a fault, the dishwasher displays error codes that identify the problem:
ERROR CODE
The Rapid light
icker eetly
The Rapid, 90 min
light icker eetly
The Glass light
icker eetly
WARNING!
If overow occurs, turn o the main water valve before calling for service.
If there is water in the bottom tray due to overow or a small leak, empty the water before starting the
dishwasher.
DESCRIPTION OF THE
Longer water inlet time.
The required temperature
FA U LT
Tap is closed or water intake is re-
stricted, or water pressure is too low
has not been reached.
Overow Some dishwasher element leaks.
Malfunction of heating element.
ACTION
35
Problem Possible cause Solution
The dishwasher will not
start
The dishwasher beeps
at the end of the wash
cycle
The rinse aid indicator
is on
The wash cycle takes
too long
The dishes are not clean
enough
The dishwasher will not
start
The appliance is not
connected to the mains
power The Delay start
function is selected
Child Lock is enabled
(selected models)
It indicates the end of
the wash programme
and emits a beep
The LED display shows
"Lsb"
The dishwasher is con-
nected to hot water
The duration of the
wash programme varies
depending on how soiled
the dishes are
The disinfection option
has been selected
The water pressure is
temporarily low
The temperature of the
inlet water is low
The dishes are arranged
too close together. The
detergent is used incor-
rectly
The selected wash programme is not suitable
for the level of soil on
the dishes
The spray arm rotation is
blocked
The dishwasher door is open — close the door.
Close the door carefully, make sure it is closed fully
Turn o the Child Lock
Add rinse aid
Check the dishwasher, make sure it is properly
connected to hot water
When heavy soil is detected, auto and normal
programmes, automatically extend the wash
cycle duration
When you select the disinfection option, the
wash cycle time will be extended to reach the
disinfection temperature
Use a dishwasher when the pressure is normal
Ensure that the dishwasher is connected to hot
water. Try not to use the dishwasher if hot water
is used elsewhere in the household
Rearrange the dishes in accordance with the in-
structions. Use the amount of detergent suitable
for the water hardness and the selected wash
programme. Use a new/dierent detergent
Select a dierent, more intensive/longer wash
programme
Make sure that the spray arm rotates freely
36
Problem Possible cause Solution
The dishwasher will not
start
The dishes are not dry
enough
Stains and deposits on
dishes
The dishwasher will not
start
The appliance is not
connected to the mains
power The Delay start
function is selected
Child Lock is enabled
(selected models)
The detergent dispenser
is empty
Dishes placed incorrectly
in the dishwasher
The selected programme
dose not include the drying stage
Water too hard In the case of very hard water, a water softener
Dishes placed incorrectly in the dishwasher
An old rinse aid was
used
Rinse aid dispenser is
empty
Too much detergent Use less detergent if water is soft
Close the door carefully, make sure it is closed
fully
Check the connection to the power supply
To change the setting, refer to the Start Delay
section in the operating instructions
Deactivate the Child Lock function, refer to the
Child Lock section in the operating instructions.
Fill the rinse aid dispenser or increase the dis-
pensed amount
Rearrange the dishes in accordance with the
instructions.
Select the wash program that includes drying
should be installed
Rearrange the dishes in accordance with the
instructions.
Use new rinse aid
Add rinse aid to the dispenser
The detergent was not
fully released from the
dispenser
The detergent dispenser
will not close
The water was not
drained from the dishwasher
The temperature of
water supplied to the
dishwasher exceeds
70°C
The detergent may be
too old
The spray arm rotation is
blocked
The lid of the detergent
dispenser is malfunctioning
The previous programme
was not completed or
was interrupted
Reduce the temperature of the water supply
Use a new/dierent detergent
Rearrange the dishes making sure that the spray
arm rotation is not restricted
Add detergent and rinse aid according to the
instructions
For information on how to select a suitable
wash programme, please refer to the operating
instructions
37
Problem Possible cause Solution
The dishwasher does
drain the water properly
Foam in the dishwasher The wrong detergent
The dishwasher is leaking
Black or grey streaks on
the dishes
The interior of the dishwasher is stained
Noise Noise of the detergent
The appliance does not
ll with water
The drain is clogged Check the air trap.
The drain hose is bent Make sure that the drain hose is correctly con-
was used
The use of the wrong
detergent resulted in a
deposit
The dishwasher is not
levelled
The aluminium dishes
rubbed against the
plates.
Coee and tea grounds Use a certied stain removal agent
A reddish stain Load the dishes and run the rinsing programme
dispenser lid opening
or water drain pump
operating
A hard object in the
dishwasher's system.
When the object drops to
bottom, the noise should
stop
The water tap is shut o Check that the water tap is open
The door lock may not be
engaged
nected to the drain
Make sure that the detergent used is suitable for
dishwashers
Make sure that the detergent used is suitable for
dishwashers
Level the dishwasher
Rearrange the dishes
which will reduce the stain formation
This is normal.
If the noise continues after the full wash cycle,
call service.
Make sure that the door is closed.
38
Height [mm] [H] 845 mm
Width [mm] [W] 448 mm
Depth [mm] [D1] 600 mm (with doors closed)
Depth [mm] [D2] 1175 mm (with 90� doors open)
39
AMICA S.A.
UL. MICKIEWICZA 52
64-510 WRONKI
TEL. 67 25 46 100
FAX 67 25 40 320
WWW.AMICA.PL
11.2019./1
Loading...