Amgoo Telecom AM516 User Manual

Mobile Phone

Model Name: AM516

Brand Name: AMGOO

FCC ID: UOS-AM516

Please note

All the functions in this manual should be

operated in Standby Mode

Like the picture below.

Tips:

Press go back to the Standby Mode

(Standby Mode)

Make a call

Select

Input the numbers,

Press Send .

Answer a call.Move

Tips:

*Down Key

to volume down..

*Up Key to volume up.

Call log

Calls logs

> >Call logs.

Received calls

> > Received calls.

Dialled calls

> > Dialed calls.

Missed calls

> > Missed calls.

Contacts

To browse the name card holder, store, edit and

delete the names and phone numbers in the

phone and SIM card.

Contact List

>

Group

> > groups.

Add new contact

> > >To SIM or To Phone.

Edit contact

> > >Edit.

Message

To receive and send the message.

Write Message

> > Write message

You could write message by using this function。

In box > >Inbox

Store the SMS and Push message received

Multimedia

FM Radio

Please connect with the earphone You can

listen in to Fm radio freely.

> > FM Radio

Bluetooth

Turn on or off Bluetooth.

Bluetooth settings: click to automatically search for and display the Bluetooth devices

list, touch the Menu button, the Bluetooth name rename detection timeout setting, display
the received file

Note:

A. display device name, search the device name is too long, it will automatically

truncated to the appropriate length.

B. select pairing the device will pop up a dialog box, the user needs to enter the
Bluetooth PIN match code. The two devices must use the same password. Headset or
earpiece kit may use a fixed password, you can refer to the Bluetooth headset instructions.
(Device can perform a lookup operation has been paired do not have to be matched.)

Wi -Fi

Wi-Fi on/off: Select this check box if you prefer to use Wi-Fi for your data connection. 
Wi-Fi settings: Open the Wi-Fi settings screen; select it from the network list. Provide
your username or password if required. 

Internet

*Depends on network support.

> >Internet service

Settings

You can customize the settings, such as time

and date, language etc.

>

Ring settings

> >

Choose the Options To customize the ring

settings options>settings

Thank You!

FCC RF EXPOSURE INFORMATION:

WARNING!! Read this information before using your phone
In August 1986 the Federal Communications Commission (FCC) of the United States with its
action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure
to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard previously set by both U.S. and international
standards bodies. The design of this phone complies with the FCC guidelines and these
international standards. Use only the supplied or an approved antenna. Unauthorized antennas
modifications, or attachments could impair call quality, damage the phone, or result in violation
of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Please contact your local dealer for
replacement antenna.

BODY-WORN OPERATION:

This device was tested for typical body-worn operations with the back of the phone kept 5mm/10mm

from the body. To comply with FCC RF exposure requirements, a minimum separation distance

of 5mm/10mm must be maintained between the user's body and the back of the phone, including the

antenna. Third-party belt-clips, holsters and similar accessories
containing metallic components shall not be used. Body-worn accessories

that cannot maintain 5mm/10mm separation distance between the user’s body and the back of the

phone, and have not been tested for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov

Your wireless handheld portable telephone is a low power radio transmitter and receiver. When
it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal
Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. Those guidelines are consistent with the safety standards previously
set by both U.S. and international standards bodies:

<ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICIMIRP> (1996)

Those standards were based on comprehensive and periodic evaluations of the relevant
scientific literature. For example, over 120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available body of research to develop
the ANSI Standard (C95.1). Nevertheless, we recommend that you use a hands-free kit with
your phone (such as an earpiece or headset) to avoid potential exposure to RF energy. The
design of your phone complies with the FCC guidelines (and those standards).

Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the phone and may violate FCC regulations.

NORMAL POSITION:

Hold the phone as you would any other telephone with the antenna pointed up and over your
shoulder.

RF Exposure Information:

This product is compliance to FCC RF Exposure requirements and refer to FCC website search for FCC
ID: UOS-AM516 to gain further information include SAR Values.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help

Do not use the device with the environment which below minimum -10℃ or over maximum

50℃, the device may not work.

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Ad Hoc function is supported but not able to operate on non-US frequencies.