Center key
Left soft key
Dial/Answer key
Earpiece
Display
Navigation key
Right soft key
On/Off key
ed
he SIM Cards, S
back cover and li
9
10
11
12
13
14
15
card and batte
ft the battery awa
y.
.
Keypad
Micropho
Charge po
Camera
Speaker
To rc h
Headset p
e
t
rt
2) Insert the S
card aligni
downward,
IM card into the S
g to the notch of t
till it cannot be p
M card slot lightl
e slot and the gol
shed further in.
1
with the corner c
plate of the card
tting of the
acing
Page 2
3) To install the SD card, open its latch, place its indented side downward, insert the
card into the card slot, and then close the latch.
4) With the metallic contacts of the battery facing the metallic contacts in the
battery slot, press the battery down until it locks into place,then fix its back
cover.
2.2 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile
phone automatically searches for an available network.
3 Input methods
This mobile phone provides multiple input methods.
1) Press # key to switch between input methods.
2) Press the * key to enter the Select symbol interface and select a symbol you
want.
4 Using the Menus
4.1 Message
Through this function, you can write message, view inboxoutbox etc, If the short
message memory is full, a blinking message icon appears on the top of the screen.
4.2 Call logs
Through this function, you can view a list of missed calls, dialed calls and received
calls etc.
4.3Phonebook
The mobile phone can store 300 phone numbers.
4.4 Camera
Use this function to take picture.
4.5 Multimedia
Video Record
Use this function to record video files.
Image
Use this function to preview photos.
Video
Use this function to play video files.
FM radio
You can use the application as a traditional FM radio with automatic tuning and
2
Page 3
saved channels.
Recorder
Use this function to record audio files.
4.6 Audio player
Use this function to play audio files.
4.7 Profiles
The mobile phone has multiple user profiles to suit user’s requirements.
4.8Tools
Torch
Select on or off as per your requirement. Long press 0 key to switch on or off in the
standby interface.
Alarm
Three alarm clocks are set but deactivated by default. For each alarm clock, the
ringing date and the ringing time can be set
Calendar
Once you enter this menu, there is a monthly-view calendar for you to view the date;
you can go to any day you want.
Calculator
The calculator can add, subtract, multiply and divide.
World clock
This function allows you to check the standard time in different areas of the world.
Backup
You can backup or restore Call logs, Contacts, SMS, Calender. through this
function.
Games
The Mobile phone has one game for the user to play,name Sokoban .
4.9 File Manager
The phone supports the SD card. You can use the file manager to conveniently
manage various directories and files on the SD card.
4.10 Settings
Phone Settings
1) Date &time: set the date format, time format, and detail time of the location.
2) Language settings: Select the display language for the mobile phone.
3) Shortcut settings: Customize the shortcut functions of the Up, Down key.
4) Auto power on/off: Set the time when the mobile phone will be automatically
powered on and off.
5) Power management
6) Restore Factory Settings: Use this function to restore factory settings. The
preset password is1234.
Display
You can set wallpaper, Idle display, Backlight etc.through this function.
Security
1)PINPIN code is the personal identification number for SIM card. Default
Use this function to view Battery left lightmod.
3
Page 4
password set by network operator should be 1234. If activated the power-on PIN
g
code, then you have to input the PIN password each time you switch on the phone.
2)Phone lockedSecured by phone password, the phone will be protected from
other unauthorized users. After activated this function, you should input password
each time you switch on the phone. The defaulted password is 1234.
3)Privacy: In this menu, you can set password-protected on the need of menu, For
the menu open the private protection, need to input a phone password when you
entered.
4)Auto keypad lockAfter activating this function, the phone will be locked
automatically after a particular time, so as to avoid error operations
5)Guardlock: You can activate or deactivate the guardlock function, When the
guardlock is activate, once your SIM card is replaced, the phone will automatically
send stolen information to the prior SIM card.
Call settings
Through this function, you can set call divertcall waitingcall barring etc.
Connections
You can set Network account, Data connection , Network selection mode etc.
4.11 Service
Internet
Thisfunctionenablesyoutoviewtheinternet.
SIM Tool Kit
STK service is the tool kit of SIM card. This phone supports the service
function .The specific items are depended on SIM card and network. Service menu
will be auto added to the phone menu when supported by network and SIM card.
4.12BT
With BT, you can make a wireless connection to other compatible devices, such as
mobile phones, computers, headsets and car kits. You can use the BT to send images,
video clips, music, sound clips, and transfer files from your compatible pc.
5. Addendum
Common fault diagnosis
Fault phenomenon possible reasons
Cannot turn on The battery is discharged. Charge it with electricity
Wrong SIM Card SIM card smudgy, clean the SIM card. Re install
the SIM card. SIM card has been damaged, replace
the SIM card
Reception bad Check on the screen of the signal strength
indicator, and this is the number of symbols in this
for 5 case said the strong signal, 2 case said the
weak si
nal
4
Page 5
Phone cannot dial
May have a strong interference environment
Battery cannot charge The battery charge is very low and a longer period
Unable to connect to
the network
Photography too dark Display brightness is set low;
Photographs too
blurry
around signal;
You may have activated the call barring function;
You may have activated the line 2, but your
network operator does not provide this service
of charging time is needed.
Signal is too weak, there is radio interference
around the signal,
SIM card has been installed incorrectly. If the SIM
Card has been damaged or it is unable to connect,
please contact your service provider.
environment light around a dark.
Shooting in a state of motion object
at the moment of pressing the shutter the phone has
a slight shaking.
Cannot enter service
menu
Safety precautions:Use a wireless hands-free system ( Headphone, headset) with a low power BT
emitter
Make sure the cell phone has a low SAR
Keep your calls short or send a text message (SMS) instead. This advice applies
especially to children, adolescents and pregnant women
Use cell phone when the signal quality is good
People having active medical implants should preferably keep the cell phone at least
15cm away from the implant
Do’s and Don’ts for disposal e-waste
Do’s:
May be the SIM card does not support this service
Ensure that an Authorized Person repairs your product
Always drop your used electronic products, batteries or any accessories after the
end of their life at nearest Authorized Collection Point or Collection Center.
Separate the packaging material according to responsible waste disposal options
and sorting for recycling.
Always remove the battery from the product, when you do not intend to use the
product anymore it in future.
Don’ts:
Do not Dismantle your Product on your own
Do not give your e-waste to Authorized Person
5
Page 6
Do not dispose-off the e-waste in landfills
Never dump E-waste in garbage bins.
Do not dispose of your product at municipal waste bins.
Do not throw used batteries into household waste.
Consequences of improper handling and disposal of E-Waste
Improper disposal of waste prevents natural resources from being re-used.
Some waste contains hazardous chemicals and if not disposed of properly may
release toxins into the soil and water, and also releases greenhouse gases into the
environment
If e-waste is not properly disposed of, it can threat to the health and well-being
of humans and animals and it also has adverse effect on the environment.
Placing of batteries or devices on or in heating devices, such as microwave,
ovens, stoves, or radiators and improper disposal of batteries may lead to
explosion.
If the battery terminals are in contact with metal objects, it may cause a fire.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested
frequency bands, although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below the
maximum value, in general, the closer you are to a wireless base station antenna,
the lower the power output.
Before a new model phone is a available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the exposure limit established by
the FCC, Tests for each phone are performed in positions and locations (e.g. at
the ear and worn on the body)as required by the FCC.
For body worn operation, this model phone has been tested and meets the FCC
RF exposure guidelines when used with an accessory designated for this product
or when used with an accessory that contains no metal and that positions the
handset a minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may result in violation of RF
exposure guidelines.
6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.