Amewi 28106 User guide

INDEX
FOREWORD
PRODUCT CONTAINS
p2
p2
FOREWORD
Thank you for purchasing CASALRC DC balance charger/discharger. For your convenience and safety, please read this manual carefully before using
this product.
C8G
OPTIONAL ACCESSORIES
SPECIFICATION
FEATURES
WARNING and NOTES
BATTERIES and MAX CHARGE CURRENT
SYSTEM SETTING
CHARGE/DISCHARGE LIPO BATTERY
CHARGE/DISCHARGE LIFE BATTERY
CHARGE/DISCHARGE LIIO BATTERY
CHARGE/DISCHARGE NIMH BATTERY
CHARGE/DISCHARGE NICD BATTERY
CHARGE/DISCHARGE PB BATTERY
NOTES and REMARK of WORKING STATUS
MONITOR
BATTERY IN SERIES/PARALLEL CHARGE
WARRANTY
p3
p3
p4
p5
p6-7
p8
p9-12
p13-16
p17-20
p21-23
p24-26
p27-29
p30
p31
p32
p33
It’s a professional and high efficiency balance charger/discharger which is especially designed for charging/discharging LiPo , LiFe, LiIo, NiMH, NiCd and PB batteries.
PRODUCT CONTAINS
Below items are included in the package, contact your supplier if any item is miss.
DC In put Cli p
Charger x1
DC Input Wire(14AWG 5 0c m)
128x64 Pixel LCD S cr ee n
Cooling Fan
Balance Port
Bal ance So cket ad apter x 1
Rub ber fee t x4pcs
LIABILITY EXCLUSION
CONFORMITY DECLARATION
p33
p34
1
Multi-Functional Swi tch
*Se lect: t urn lef t/rig ht *En ter/S et/St op: pre ss
Charge Output So ck et
Ins truct ion Man ual x1
Temp er ature Sensor Port
2
OPTIONAL ACCESSORIES
AM8G
Input voltage range: 11.0-30.0V DC Charge current range: 0.1-20.0A Discharge current range: 0.1-20.0A Maximum charge power: 400W Maximum discharge power: 20W Current drain for balancing: 400mA Balance accuracy: <10mV LiPo/LiIo/LiFe battery cell count: 1-8 series NiCd/NiMH battery cell count: 1-20 series Pb battery cell count: 1-12 series (2-24V) Battery setup memories: 10 Temperature sensor: Yes Weight: 433g Dimension(LxWxD): 145X103X35mm
FEATURES
Temp er ature Sensor( magne t)Par allel Adapter
2x2 S in seri es Adapter
SPECIFICATION
2x3 S in seri es Adapter
3 4
High efficiency synchronous DC-DC circuit. Special advanced charging technology ensure a fast and precision charging performance.
The CASALRC balance chargers series has a integrated cell balancer which can especially used for charging the LiPo, Lilo, LiFe, NiMH, NiCd and Pb batteries.
10 battery profile memories, 1 default memory of latest profile, 9 custom memories can be save and load by the user.
128x64 pixel LCD screen shows rich information: input voltage, outputl current, charge capacity (mAh), charge time, temperature, cell voltage, cell voltage difference etc.
Various functional settings can meet a wide range of use. Balance charge, normal charge, fast charge, storage and discharge for Lithium batteries. charge, charge, cycle and discharge for NiCd/NiMH batteries. Charge, cycle and discharge for Pb batteries.
Various system settings: backlight, contrast, key sound, safty time, temperature , capacity , power limited and input voltage cutoff.
Full protection system: protection of reversed polarity (input and output), higher/lower input voltage, power supplymbattery temperature, over charge/discharge and time limited.
manual-
C8G
output voltage,
auto-
cutoff cutoff
CASALRC 8G is ONLY suitable for charge rechargeable LiPo, LiFe,
B a tte r y T y p e N o . o f C e l ls R a te d V o lta g e (V )
M a x C h a rg e C urre n t(A )
fo r 4 0 0 W
1 3.7 20 .0 2 7.4 20 .0 3 11 .1 20 .0 4 14 .8 20 .0 5 18 .5 20 .0 6 22 .2 18 .0 7 25 .9 15 .4 8 29 .6 13 .5 1 3.3 20 .0 2 6.6 20 .0 3 9.9 20 .0 4 13 .2 20 .0 5 16 .5 20 .0 6 19 .8 20 .0 7 23 .1 17 .3 8 26 .4 15 .2 1 3.6 20 .0 2 7.2 20 .0 3 10 .8 20 .0 4 14 .4 20 .0 5 18 20 .0 6 21 .6 18 .5 7 25 .2 15 .9 8 28 .8 13 .9 1 1.2 20 .0 2 2.4 20 .0 3 3.6 20 .0 4 4.8 20 .0 5 6 2 0 .0 6 7.2 20 .0 7 8.4 20 .0 8 9.6 20 .0 9 10 .8 20 .0
N i M H 10 12 20 .0
11 13 .2 20 .0
L ip o
L iF e
L iIo
LiIo,NiMH and PB batteries. Do not attempt to charge dry cells. Charge other types of batteries may cause fire or explosion.
Never leave the charger unattended when it is working. If you leave, disconnect the battery to prevent any unexpected dangerous or damage.
The prescript DC input voltage range from 11-30V. Never connect it to any other power supply which is unsuitable.
Ensure program and settings match the battery pack, incorrect setting to charge/discharge a battery may damage the battery, even would cause a fire.
Protect charger from dust, dirt and damp. Do not attempt to disassemble the c har ger, con tac t the after s ale s cen ter for maintenance if needed.
Never place the charger and batteries connected to it on any form of flammable surface. Never operate the charger in the vicinity of inflammable material or gas.
Ensure that there is an unrestricted airflow to and from the charger's cooling slots.
Never charge or discharge any battery having evidence of leaking, expansion/swelling, damaged outer cover or case, color-change or distortion.
Take great care to maintain correct battery polarity, and avoid shot-circuit. Read the battery manufacturer's instructions and adhere to them strictly.
BATTERIES and MAX CHARGE CURRENTWARNING and NOTES
5 6
SYSTEM SETTING
12 14,4 20,0 13 15,6 20,0 14 16,8 20,0 15 18 20,0 16 19,2 20,0 17 20,4 19,6 18 21,6 18,5 19 22,8 17,5 20 24 16,7
NiCd
1 2 20,0 2 4 20,0 3 6 20,0 4 8 20,0 5 10 20,0 6 12 20,0 7 14 20,0 8 16 20,0
9 18 20,0 10 20 20,0 11 22 18,2 12 24 16,7
Lipo
LiFe
LiIo
NiMH
NiCd
PB
same as NiMH
PB
Voltage Level: 3.7V/cell Max Charge Voltage: 4.2V/cell Discharge Voltage Cut off Level: 3.0V/cell or higher
Voltage Level: 3.3V/cell Max Charge Voltage: 3.6V/cell Discharge Voltage Cut off Level: 2.0V/cell or higher
Voltage Level: 3.6V/cell Max Charge Voltage: 4.1V/cell Discharge Voltage Cut off Level: 2.7V/cell or higher
Voltage Level: 1.2V/cell Max Charge Voltage: 1.6V/cell Discharge Voltage Cut off Level: 0.85V/cell or higher
Voltage Level: 1.2V/cell Max Charge Voltage: 1.6V/cell Discharge Voltage Cut off Level: 1.0V/cell or higher
Voltage Level: 2.0V/cell Max Charge Voltage: 2.45V/cell Discharge Voltage Cut off Level: 1.75V/cell or higher
*Select: turn left/right *Enter/Set/Stop: press
STANDBY Menu
LIP O BAL C HG
C
Default memo ry (the parame te r setting of las t wo rk of the charg er )
Press “START” charger wil l directly wor k un der default memory.
Press “LOAD” , pa rameter wil l change to the me mo ry you load, press “START” charger wil l wo rk under the sett in g of the memory.
STA NDBY
AUT O
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
SYS TEM SET TING
BAC KLIGH T
CON TRAST KEY
SOU ND SAF TY
TIM E
TEM P
CUT
CAP
CUT
SAV E BAC K
SYS TEM SET TING BAC KLIGH T
CON TRAST
KEY
SOU ND SAF TY
TIM E
TEM P
CUT
CAP
CUT
SAV E
SYS TEM SET TING BAC KLIGH T CON TRAST
KEY
SOU ND
SAF TY
TIM E
TEM P
CUT
CAP
CUT
SAV E
SYS TEM SET TING BAC KLIGH T CON TRAST KEY
SOU ND
SAF TY
TIM E
TEM P
CUT
CAP
CUT
SAV E
SYS TEM SET TING
Bac kligh t
BAC KLIGH T 60 CON TRAST KEY
SOU ND SAF TY
TIM E
TEM P
CUT
CAP
CUT
SAV E
SYS TEM SET TING BAC KLIGH T CON TRAST KEY
SOU ND SAF TY
TIM E
TEM P
CUT
CAP
CUT
sav e
SYS TEM SET TING
I V
CUT
POW ER LIMI T
SAV E
SYS TEM SET TING I V
CUT
POW ER LIMI T
SAV E
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF
OFF
OFF
OFF
OFF
OFF
60
80 on
140 99 500 0
60
80
ON
140 99 500 0
60 80
ON
140 99 500 0
60 80 ON
140
99 500 0
60
80 on
140
99
500 0
60 80 ON
140 99
500 0
11 00
250
11 00
300
MIN C MAH
MIN C MAH BAC K
MIN C MAH BAC K
MIN C MAH BAC K
MIN C MAH BAC K
MIN C MAH BAC K
V W
BAC K
V W
BAC K
BACKLIGHT:
Range from 0-100%
CONTRAST:
Range from 0-100%
KEY SOUND:
On/Off optional
SAFTY TIME:
Charge/discharge time limit, range from 10-1000 minutes. Off=no limit.
TEMPERATURE CUTOFF:
Battery upper temperature limit. Range from 20-100 °C. Off=no limit.
CAPACITY CUTOFF:
Battery capacity protection. Range from 100-99999 mAh. Off=no limit.
I_V CUTOFF:
Power supply protection. Range from 11-30 V. Default:11V
POWER LIMIT:
Power supply protection. Range from 50-300 W. Default:300W
7 8
CHARGE/DISCHARGE LIPO BATTERY
*Select: turn left/right *Enter/Set/Stop: press
LIP O
BAL C HG
C
STA NDBY
Aut o
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
Parameter setting Working stutus
PRE SENT SE TTING
BATT
TYP E
TYP E
TYP E
TYP E
TYP E
STA RT
STA RT
STA RT
STA RT
STA RT
STA RT
LIP O
BAL C HG
10 00
420 0
LIP O
CHA RGE
10 00
420 0
LIP O
FAS T CHG
10 0 0
420 0
LIP O
STO RAGE
5 00 380 0
DIS CHARG E
5 00 300 0
LIP O
CYC LE
CYC LE
10 0 0
420 0 5 00
300 0 C      D
MOD E
C TVC
SAV E
PRE SENT SE TTING
BATT
MOD E CEL LS
C TVC
SAV E STA RT
PRE SENT SE TTING
BATT
MOD E CEL LS C CUR C TVC
SAV E
PRE SENT SE TTING
BATT
MOD E CEL L CUR RENT TVC
SAV E
PRE SENT SE TTING
BATT TYP E LIP O
MOD E CEL LS D CUR D TVC
SAV E
PRE SENT SE TTING
BATT
MOD E CEL LS C CUR C TVC D CUR SAV E
PRE SENT SE TTING
D TVC
SEQ UENCE W TIM E TIM ES
SAV E
10
6 S
6 S
6 S
6 S
6 S
1
AC CUR MV
BAC K
AC CU R MV
BAC K
A MV
BAC K
A MV
BAC K
A MV
BAC K
A MV A
BAC K
MV
MIN
BAC K
LIP O BAL C HG I 12 O 24
00
LIP O CHA RGE I 12 O 24
00
LIP O FAS T CH G I 12 O 24
00
LIP O STO RAGE I 12 O 24
00
LIP O STO RAGE I 12 O 24
00
LIP O CYC LE I 12 O 24
00
6S
MAH1 958
28
3812
6S
MAH1 958
28
3812
6S
MAH1 958
28
3812
6S
MAH158
28
3812
6S
MAH158
28
3812
6S
MAH1 958
28
3812
BAT CE LL mV C6 4 138 20 C5 4 135 17
V6 0
C4 4 130 12
V7 0
C3 4 125 7
A691
C2 4 120 2
C
C1 4 118 0
STO P
V6 0 V7 0
CHA RGING
A691
C
STO P
V6 0 V7 0
CHA RGING
A691
C
STO P
BAT CE LL mV C6 4 138 20 C5 4 135 17
V6 0
C4 4 130 12
V7 0
C3 4 125 7
A691
C2 4 120 2
C
C1 4 118 0
STO P
V6 0 V7 0
DIS CHARG ING
A691
C
STO P
BAT CE LL mV C6 4 138 20 C5 4 135 17
V6 0
C4 4 130 12
V7 0
C3 4 125 7
A691
C2 4 120 2
C
C1 4 118 0
STO P
RimΩ
RimΩ
RimΩ
4 7 5 4 2 1
BAL_CHG: Balance charge CHARGE: Normal charge (balance connector not required) FAST_CHG: Fast charge (balance connector not required)
(balance connector required)
STORAGE: Charge or discharge a battery according to the situation of the battery (balance connector optional)
DISCHARGE: Discharge (balance connector optional) CYCLE: Charge and discharge (balance connector optional)
Select the cell count of the battery, range from 1-6 .
In balance charge mode
, charger can
automatically detect the cell count of the battery.
Important note: Except balance charge mode, charger can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation.
Select the max charge/discharge current. C-CUR: Charge current Range from 0.1-20.0, change unit: 0.1-20.0 D-CUR: Discharge current Range from 0.1-20.0, change unit: 0.1-20.0
4 7 5 4 2 1
Terminal Voltage Control. C-TVC: TVC of Charge Range from 4100-4250, change unit: 10, default: 4200 D-TVC: TVC of Discharge Range from 2500-4200, change unit: 10, default: 3000
(Storage mode range from 3800-3900, default: 3850)
9 10
SEQUENCE
Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge
W-TIME
Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit 1 .
TIMES
Only in Cycle mode, set the times of charge/discharge cycle. Range from 1-9 times, change unit 1 .
SAVE
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under present setting.
Back to “STANDBY” menu.
Balance Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Fast Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Storage
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Discharge
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Cycle
Out put(b atter y) Volta ge
Ext ernal t emper ature
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Cha rge cur rent
Cha rged ca pacit y
Tim er
Working stutus
28
28
28
28
28
28
6S
MAH1 958
3812
Bat tery ce lls
6S
MAH1 958
3812
6S
MAH1 958
3812
6S
MAH158
3812
6S
MAH158
381200
6S
MAH1 958
3812
Bat tery ce lls
BAT CE LL mV C6 4 138 20 C5 4 135 17
V6 0
C4 4 130 12
V7 0
C3 4 125 7
A691
C2 4 120 2
C
C1 4 118 0
V6 0 V7 0 A691
C
V6 0 V7 0 A691
C
BAT CE LL mV C6 4 138 20 C5 4 135 17
V6 0
C4 4 130 12
V7 0
C3 4 125 7
A691
C2 4 120 2
C
C1 4 118 0
V6 0 V7 0
DIS CHARG ING
A691
C
BAT CE LL mV C6 4 138 20 C5 4 135 17
V6 0
C4 4 130 12
V7 0
C3 4 125 7
A691
C2 4 120 2
C
C1 4 118 0
LIP O BAL C HG I 12 O 24
00
LIP O CHA RGE I 12 O 24
00
LIP O FAS T CHG I 12 O 24
00
LIP O STO RAGE I 12 O 24
00
LIP O DIS CHARG E I 12 O 24
LIP O CYC LE I 12 O 24
00
STO P
Cel l volta ge
Cel l volta ge diff erenc e
CHA RGING
STO P
CHA RGING
STO P
STO P
STO P
Cel l volta ge
Cel l volta ge diff erenc e
RimΩ
4 7 5 4 2 1
Cel l inter nal res istan ce
RimΩ
RimΩ
RimΩ
4 7 5 4 2 1
Cel l inter nal res istan ce
Work finshed
LIP O
6S BAL C HG I 12 O 25
LIP O CHA RGE I 12 O 25
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIP O FAS T CHG I 12 O 25
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIP O STO RAGE I 12 O 23
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIP O DIS CHARG E I 12 O 20
*Di splay s top alo ng with “ Bi... Bi... ” sound
LiP o CYC LE I 12 O 20
*Di splay s top alo ng with “ Bi... Bi... ” sound
V6 0 V10
FIN ISHED
A690
MAH205 8
28
C
382 0
00
MAH205 8
28
00
MAH205 8
28
00
MAH958
28
00
MAH19 58
28
01
MAH205 8
28
02
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
3818
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
3816
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
385 0
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
382 0
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
383 0
ENT ER
11 12
CHARGE/DISCHARGE LIFE BATTERY
*Select: turn left/right *Enter/Set/Stop: press
LIP O BAL C HG
C
STA NDBY
AUT O
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
Parameter setting Working stutus
PRE SENT SE TTING
BATT
TYP E
MOD E
C TVC
SAV E
BATT
MOD E CEL LS
C TVC
SAV E STA RT
BATT
MOD E CEL LS C CUR C TVC
SAV E
BATT
MOD E CEL L CUR RENT TVC
SAV E
BATT TYP E
MOD E CEL LS D CUR D TVC
SAV E
BATT
MOD E CEL LS C CUR
C TVC D CUR SAV E
D TVC
SEQ UENCE W TIM E TIM ES
SAV E
STA RT
PRE SENT SE TTING
TYP E
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
STA RT
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
STA RT
LIF E
BAL C HG
10 00
360 0
LIF E
CHA RGE
6 S
10 00
360 0
LIF E
FAS T CHG
6 S
10 0 0
360 0
LIF E
STO RAGE
6 S 5 00 330 0
LIF E
DIS CHARG E
6 S 5 00 200 0
LIF E
CYC LE
CYC LE
6 S
10 0 0
360 0 5 00
200 0 C      D
10
1
AC CUR MV
BAC K
AC CU R MV
BAC K
A MV
BAC K
A MV
BAC K
A MV
BAC K
A MV A
BAC K
MV
MIN
BAC K
LIF E BAL C HG I 12 O 21
00
LIF E CHA RGE I 12 O 21
00
LIF E FAS T CHG I 12 O 21
00
LIF E STO RAGE I 12 O 21
00
LIF E STO RAGE I 12 O 21
00
LIF E CYC LE I 12 O 21
00
6S
MAH1 958
28
3812
6S
MAH1 958
28
3812
6S
MAH1 958
28
3812
6S
MAH158
28
3812
6S
MAH158
28
3812
6S
MAH1 958
28
3812
BAT CE LL mV C6 3 538 20 C5 3 535 17
V6 0
C4 3 530 12
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
STO P
V6 0 V1 0
CHA RGING
A691
C
STO P
V6 0 V1 0
CHA RGING
A691
C
STO P
BAT CE LL mV C6 3 538 20 C5 3 535 17
V6 0
C4
353 0
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
STO P
V6 0 V1 0
DIS CHARG ING
A691
C
STO P
BAT CE LL mV C6 3 538 20 C5 3 535 17
V6 0
C4 3 530 12
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
STO P
RimΩ
4 7 5 4 2 1
BAL_CHG: Balance charge CHARGE: Normal charge (balance connector not required) FAST_CHG: Fast charge (balance connector not required)
(balance connector required)
STORAGE: Charge or discharge a battery according to the situation of the battery (balance connector optional)
DISCHARGE: Discharge (balance connector optional) CYCLE: Charge and discharge (balance connector optional)
Select the cell count of the battery, range from 1-6 .
In balance charge mode
, charger can
automatically detect the cell count of the battery.
Important note: Except balance charge mode, charger can not detect the correct cell count
RimΩ
12
of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation.
Select the max charge/discharge current. C-CUR: Charge current Range from 0.1-20.0, change unit: 0.1-20.0 D-CUR: Discharge current Range from 0.1-20.0, change unit: 0.1-20.0
RimΩ
4 7 5 4 2 1
Terminal Voltage Control. C-TVC: TVC of Charge Range from 3500-3650, change unit: 10, default: 3600 D-TVC: TVC of Discharge Range from 1800-3600, change unit: 10, default: 2000
(Storage mode range from 3250-3350, default: 3300)
13 14
SEQUENCE
Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge
W-TIME
Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit 1 .
TIMES
Only in Cycle mode, set the times of charge/discharge cycle. Range from 1-9 times, change unit 1 .
SAVE
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under present setting.
Back to “STANDBY” menu.
Balance Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Fast Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Storage
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Discharge
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Cycle
Out put(b atter y) Volta ge
Ext ernal t emper ature
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Cha rge cur rent
Cha rged ca pacit y
Tim er
Working stutus
BAT CE LL mV
6S
LIF E BAL C HG
I 12 O 21
00
LIF E CHA RGE I 12 O 21
00
LIF E FAS T CHG I 12 O 21
00
LIF E STO RAGE I 12 O 21
00
LIF E DIS CHARG E I 12 O 21
00
LIF E CYC LE I 12 O 21
00
28
28
28
28
28
28
MAH1 958
3812
Bat tery ce lls
6S
MAH1 958
3812
6S
MAH1 958
3812
6S
MAH158
3812
6S
MAH158
3812
6S
MAH1 958
3812
Bat tery ce lls
C6 3 538 20 C5 3 535 17
V6 0
C4 3 530 12
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
V6 0 V1 0 A691
C
V6 0 V1 0 A691
C
BAT CE LL mV C6 3 538 20 C5 3 535 17
V6 0
C4 3 530 12
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
V6 0 V1 0
DIS CHARG ING
A691
C
BAT CE LL mV C6 3 538 20 C5 3 535 17
V6 0
C4 3 530 12
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
RimΩ
STO P
Cel l volta ge
Zel len Inn enwie derst and
Zel lensp annun gsdif feren z
CHA RGING
STO P
CHA RGING
STO P
RimΩ
STO P
STO P
RimΩ
STO P
Cel l volta ge
Cel l inter nal res istan ce
Cel l volta ge diff erenc e
Work finshed
LIF E
6S 4 7 5 4 2 1
4 7 5 4 2 1
BAL C HG I 12 O 21
V6 0 V5 0
FIN ISHED
A690
MAH205 8
28
C
382 0
00
ENT ER
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIF E
6S
CHA RGE I 12 O 21
V6 0 V5 0
FIN ISHED
A690
MAH205 8
28
C
381 8
00
ENT ER
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIF E
6S
FAS T CHG I 12 O 21
V6 0 V5 0
FIN ISHED
A690
MAH205 8
28
C
3816
00
ENT ER
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIF E
6S
STO RAGE I 12 O 19
V6 0 V8 0
FIN ISHED
A690
MAH958
28
C
385 0
00
ENT ER
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIF E
6S
DIS CHARG E I 12 O 13
V6 0 V10
FIN ISHED
A690
MAH20 58
28
C
382 0
01
ENT ER
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIF E
6S
CYC LE I 12 O 13
V6 0 V10
FIN ISHED
A690
MAH19 58
28
C
383 0
02
ENT ER
*Di splay s top alo ng with “ Bi... Bi... ” sound
15 16
CHARGE/DISCHARGE LIIO BATTERY
*Select: turn left/right *Enter/Set/Stop: press
LIP O BAL C HG
C
STA NDBY
AUT O
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
Parameter setting Working stutus
PRE SENT SE TTING
BATT
TYP E
MOD E
C TVC
SAV E
BATT
MOD E CEL LS
C TVC
SAV E STA RT
BATT
MOD E CEL LS C CUR C TVC
SAV E
BATT
MOD E CEL L CUR RENT TVC
sav e
BATT TYP E
MOD E CEL LS D CUR D TVC
SAV E
BATT
MOD E CEL LS C CUR C TVC D CUR SAV E
D TVC
SEQ UENCE W TIM E TIM ES
SAV E
STA RT
PRE SENT SE TTING
TYP E
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
STA RT
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
STA RT
LII O
BAL C HG
10 00
410 0
LII O
CHA RGE
6 S
10 00
410 0
LII O
FAS T CHG
6 S
10 0 0
410 0
LII O
STO RAGE
6 S 5 00 375 0
LII O
DIS CHARG E
6 S 5 00 250 0
LII O
CYC LE
CYC LE
6 S
10 0 0
410 0
5 00
250 0 C      D
10
1
AC CUR MV
BAC K
AC CU R MV
BAC K
A MV
BAC K
A MV
BAC K
A MV
BAC K
A MV A
BAC K
MV
MIN
BAC K
LII O BAL C HG I 12 O 24
00
LII O CHA RGE I 12 O 24
00
LII O FAS T CHG I 12 O 24
00
LII O STO RAGE I 12 O 24
00
LII O STO RAGE I 12 O 24
00
LII O CYC LE I 12 O 24
00
6S
MAH1 958
28
3812
6S
MAH1 958
28
3812
6S
MAH1 958
28
3812
6S
MAH158
28
3812
6S
MAH158
28
3812
6S
MAH1 958
28
3812
BAT CE LL mV C6 4 038 20 C5 4 035 17
V6 0
C4 4 030 12
V1 0
C3 4 025 7
A691
C2 4 020 2
C
C1 4 018 0
STO P
V6 0 V1 0
CHA RGING
A691
C
STO P
V6 0 V1 0
CHA RGING
A691
C
STO P
BAT CE LL mV C6 4 038 20 C5 4 035 17
V6 0
C4
403 0
V1 0
C3 4 025 7
A691
C2 4 020 2
C
C1
401 8
STO P
V6 0 V1 0
DIS CHARG ING
A691
C
STO P
BAT CE LL mV C6 3 538 20 C5 3 535 17
V6 0
C4 3 530 12
V1 0
C3 3 525 7
A691
C2 3 520 2
C
C1 3 518 0
STO P
RimΩ
4 7 5 4 2 1
BAL_CHG: Balance charge CHARGE: Normal charge (balance connector not required) FAST_CHG: Fast charge (balance connector not required)
(balance connector required)
STORAGE: Charge or discharge a battery according to the situation of the battery (balance connector optional)
DISCHARGE: Discharge (balance connector optional) CYCLE: Charge and discharge (balance connector optional)
Select the cell count of the battery, range from 1-6 .
In balance charge mode
, charger can
automatically detect the cell count of the battery.
Important note: Except balance charge mode, charger can not detect the correct cell count
RimΩ
12
0
of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation.
Select the max charge/discharge current. C-CUR: Charge current Range from 0.1-20.0, change unit: 0.1-20.0 D-CUR: Discharge current Range from 0.1-20.0, change unit: 0.1-20.0
RimΩ
4 7 5 4 2 1
Terminal Voltage Control. C-TVC: TVC of Charge Range from 4000-4150, change unit: 10, default: 4100 D-TVC: TVC of Discharge Range from 2400-4100, change unit: 10, default: 2700
(Storage mode range from 3700-3800, default: 3750)
17 18
SEQUENCE
Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge
W-TIME
Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit 1 .
TIMES
Only in Cycle mode, set the times of charge/discharge cycle. Range from 1-9 times, change unit 1 .
SAVE
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under present setting.
Back to “STANDBY” menu.
Balance Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Fast Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Storage
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Discharge
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Cycle
Out put(b atter y) Volta ge
Ext ernal t emper ature
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Cha rge cur rent
Cha rged ca pacit y
Tim er
Working stutus
BAT CE LL mV
6S
LII O BAL C HG I 12 O 24
00
LII O CHA RGE I 12 O 24
00
LII O FAS T CHG I 12 O 24
00
LII O STO RAGE I 12 O 24
00
LII O DIS CHARG E I 12 O 24
00
LII O CYC LE I 12 O 24
00
28
28
28
28
28
28
MAH1 958
3812
Bat tery ce lls
6S
MAH1 958
3812
6S
MAH1 958
3812
6S
MAH158
3812
6S
MAH158
3812
6S
MAH1 958
3812
Bat tery ce lls
C6 4 038 20 C5 4 035 17
V6 0
C4 4 030 12
V1 0
C3 4 025 7
A691
C2 4 020 2
C
C1 4 018 0
V6 0 V1 0 A691
C
V6 0 V1 0 A691
C
BAT CE LL mV C6 4 038 20 C5 4 035 17
V6 0
C4 4 030 12
V1 0
C3 4 025 7
A691
C2 4 020 2
C
C1 4 018 0
V6 0 V1 0
DIS CHARG ING
A691
C
BAT CE LL mV C6 4 038 20 C5 4 035 17
V6 0
C4 4 030 12
V1 0
C3 4 025 7
A691
C2 4 020 2
C
C1 4 018 0
STO P
Cel l volta ge
Cel l volta ge diff erenc e
CHA RGING
STO P
CHA RGING
STO P
STO P
STO P
STO P
Cel l volta ge
Cel l volta ge diff erenc e
RimΩ
4 7 5 4 2 1
Cel l inter nal res istan ce
RimΩ
RimΩ
4 7 5 4 2 1
Cel l inter nal res istan ce
Work finshed
LIL O
6S BAL C HG I 12 O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIL O CHA RGE I 12 O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIL O FAS T CHG I 12 O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIL O STO RAGE I 12 O 22
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIL O DIS CHARG E I 12 O 17
*Di splay s top alo ng with “ Bi... Bi... ” sound
LIL O CYC LE I 12 O 17
*Di splay s top alo ng with “ Bi... Bi... ” sound
V6 0 V5 0
FIN ISHED
A690
MAH205 8
28
C
382 0
00
MAH205 8
28
00
MAH205 8
28
00
MAH958
28
00
MAH19 58
28
01
MAH20 58
28
02
ENT ER
6S
V6 0 V5 0
FIN ISHED
A690
C
381 8
ENT ER
6S
V6 0 V5 0
FIN ISHED
A690
C
3816
ENT ER
6S
V6 0 V5 0
FIN ISHED
A690
C
385 0
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
382 0
ENT ER
6S
V6 0 V10
FIN ISHED
A690
C
383 0
ENT ER
19 20
CHARGE/DISCHARGE NIMH BATTERY
*Select: turn left/right *Enter/Set/Stop: press
LIP O BAL C HG
C
STA NDBY
AUT O
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
Parameter setting Working stutus
PRE SENT SE TTING
BATT
TYP E
MOD E
SAV E STA RT
PRE SENT SE TTING
BATT
TYP E
MOD E C CUR
SAV E
BATT TYP E
MOD E CEL Ls D CUR D TVC
SAV E
BATT
MOD E CEL LS C CUR D CUR D TVC SAV E
SEQ UENCE
W TIM E TIM ES
SAV E
STA RT
PRE SENT SE TTING
STA RT
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
STA RT
NIM H
AUT O CH G
10 00
NIM H
MAN U CHG
00
10
NIM H
DIS CHARG E
15 S
5 00
100 0
NIM H
CYC LE
CYC LE
15 S
10 0 0
5 00
100 0
C      D
10
1
AC CU R
BAC K
A
BAC K
A MV
BAC K
A
A
MV
BAC K
MIN
BAC K
NIM H
15S AUT O CHG I 12 O 23
MAH1 958
28
00
NIM H
15S
MAN U CHG
I 12 O 23
MAH1 958
28
00
15S
NIM H DIS CHARG E I 12 O 23
MAH158
28
00
NIM H
15S CYC LE I 12 O 23
MAH1 958
28
00
V6 0 V1 0 A691
C
3812
V6 0 V1 0 A691
c
3812
V6 0 V1 0
DIS CHARG ING
A691
C
3812
V6 0 V1 0 A691
C
3812
CHA RGING
STO P
CHA RGING
STO P
STO P
CHA RGING
STO P
Select the cell count of the battery, range from 1-15 . Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation.
Select the max charge/discharge current. C-CUR: Charge current Range from 0.1-20.0, change unit: 0.1-20.0 D-CUR: Discharge current Range from 0.1-20.0, change unit: 0.1-20.0
Terminal Voltage Control. D-TVC: TVC of Discharge Range from 800-1200, change unit: 10, default: 1000
SEQUENCE
Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge
W-TIME
Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit 1 .
TIMES
Only in Cycle mode, set the times of charge/discharge cycle. Range from 1-9 times, change unit 1 .
NIMH
AUTO_CHG: Auto Charge, the charger will automatically charge the battery according to
the situation of the battery, current will be adjust by the charger but never over the setting.
MANU_CHG: Manual Charge, the charger will charge the battery by the setting current. DISCHARGE: Discharge CYCLE: Charge and discharge
21 22
SAVE
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under present setting.
Back to “STANDBY” menu.
CHARGE/DISCHARGE NICD BATTERY
Auto_Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Manu_Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Discharge
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Cycle
Out put(b atter y) Volta ge
Ext ernal t emper ature
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Cha rge cur rent
Cha rged ca pacit y
Tim er
Working stutus
NIM H
15S AUT O CHG I 12 o 23
NIM H MAN U CHG I 12 o 23
NIM H DIS CHARG E I 12 O 23
NIM H CYC LE I 12 O 23
V6 0 V1 0
CHA RGING
A691
MAH1 958
28
C
3812
00
15S
V6 0 V1 0
CHA RGING
A691
MAH1 958
28
C
3812
00
15S
V6 0 V1 0
DIS CHARG ING
A691
MAH158
28
C
3812
00
15S
V6 0 V1 0
CHA RGING
A691
MAH1 958
28
C
3812
00
STO P
STO P
STO P
STO P
Work finshed
NIM H
15S AUT O CHG I 12
O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
NIM H
MAN U CHG I 12
O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
NIM H
DIS CHARG E I 12
O 16
*Di splay s top alo ng with “ Bi... Bi... ” sound
NIM H
CYC LE I 12
O 16
*Di splay s top alo ng with “ Bi... Bi... ” sound
V6 0 V2 0
FIN ISHED
A690
MAH205 8
28
C
381 8
00
15S
MAH205 8
28
00
15S
MAH19 58
28
01
15S
MAH20 58
28
02
ENT ER
V6 0 V2 0
FIN ISHED
A690
C
3816
ent er
V6 0 V10
FIN ISHED
A690
C
382 0
ENT ER
V6 0 V10
FIN ISHED
A690
C
383 0
ENT ER
*Select: turn left/right *Enter/Set/Stop: press
LIP O BAL C HG
C
STA NDBY
AUT O
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
Parameter setting Working stutus
PRE SENT SE TTING
BATT
TYP E
MOD E
SAV E STA RT
PRE SENT SE TTING
BATT
TYP E
MOD E C CUR
SAV E
BATT TYP E
MOD E CEL LS D CUR D TVC
SAV E
BATT
MOD E CEL Ls C CUR D CUR D TVC SAV E
SEQ UENCE
W TIM E TIM ES
SAV E
STA RT
PRE SENT SE TTING
STA RT
PRE SENT SE TTING
TYP E
STA RT
PRE SENT SE TTING
STA RT
NIC D
AUT O CH G
10 00
NIC D
MAN U CHG
00
10
NIC D
DIS CHARG E
15 S
5 00
100 0
NIC D
CYC LE
CYC LE
15 S
10 0 0
5 00
100 0
C      D
10
1
AC CU R
BAC K
A
BAC K
A MV
BAC K
A A MV
BAC K
MIN
BAC K
NIC D
15S AUT O CHG I 12 O 23
MAH1 958
28
00
NIC D
15S MAN U CHG I 12 O 23
MAH1 958
28
00
15S
Nic d DIS CHARG E I 12 O 23
MAH158
28
00
NIC D
15S CYC LE I 12 O 23
MAH1 958
28
00
V6 0 V1 0
CHA RGING
A691
C
3812
V6 0 V1 0
CHA RGING
A691
C
3812
V6 0 V1 0
DIS CHARG ING
A691
C
3812
V6 0 V1 0
CHA RGING
A691
C
3812
STO P
STO P
STO P
STO P
NICD
AUTO_CHG: Auto Charge, the charger will automatically charge the battery according to
the situation of the battery, current will be adjust by the charger but never over the setting.
MANU_CHG: Manual Charge, the charger will charge the battery by the setting current. DISCHARGE: Discharge CYCLE: Charge and discharge
23 24
Select the cell count of the battery, range from 1-15 . Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation.
Select the max charge/discharge current. C-CUR: Charge current Range from 0.1-20.0, change unit: 0.1-20.0 D-CUR: Discharge current Range from 0.1-20.0, change unit: 0.1-20.0
Terminal Voltage Control. D-TVC: TVC of Discharge Range from 650-1050, change unit: 10, default: 850
Auto_Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Manu_Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Tim er
Working stutus
NIC D
15S AUT O CHG I 12 O 23
NIC D MAN U CHG I 12 O 23
V6 0 V1 0
cha rging
A691
MAH1 958
28
C
3812
00
15S
V6 0 V1 0
CHA RGING
A691
MAH1 958
28
C
3812
00
STO P
STO P
Work finshed
NIC D
15S AUT O CHG I 12
O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
NIC D
MAN U CHG I 12
O 24
*Di splay s top alo ng with “ Bi... Bi... ” sound
V6 0 V2 0
FIN ISHED
A690
MAH205 8
28
C
381 8
00
15S
MAH205 8
28
00
ENT ER
V6 0 V2 0
FIN ISHED
A690
C
3816
ENT ER
SEQUENCE
Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge
W-TIME
Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit 1 .
TIMES
Only in Cycle mode, set the times of charge/discharge cycle. Range from 1-9 times, change unit 1 .
SAVE
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under present setting.
Back to “STANDBY” menu.
Discharge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Cycle
Out put(b atter y) Volta ge
Ext ernal t emper ature
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Cha rge cur rent
Cha rged ca pacit y
Tim er
NIC D
15S DIS CHARG E I 12 O 23
MAH158
28
00
NIC D
15S CYC LE I 12 O 23
MAH1 958
28
00
V6 0 V1 0
DIS CHARG ING
A691
C
3812
V6 0 V1 0
CHA RGING
A691
C
3812
STO P
STO P
NIC D
15S DIS CHARG E I 12
O 13
*Di splay s top alo ng with “ Bi... Bi... ” sound
NIC D
CYC LE I 12
O 13
*Di splay s top alo ng with “ Bi... Bi... ” sound
V6 0 V80
FIN ISHED
A690
MAH19 58
28
C
382 0
01
15S
MAH20 58
28
02
ENT ER
V6 0 V80
FIN ISHED
A690
C
383 0
ENT ER
25 26
CHARGE/DISCHARGE PB BATTERY
*Select: turn left/right *Enter/Set/Stop: press
LIP O BAL C HG
C
STA NDBY
AUT O
Sys L oad
A0010
MV420 0
Monitor Star t
Menu
Parameter setting Working stutus
PB
PRE SENT SE TTING
BATT
TYP E
MOD E CEL LS C CUR C TVC
SAV E
PRE SENT SE TTING
BATT TYP E
MOD E CEL LS D CUR D TVC
SAV E
PRE SENT SE TTING
BATT
TYP E
MOD E CEL LS C CUR D CUR D TVC SAV E
STA RT
STA RT
STA RT
PB
CHA RGE
10 S
00
10
240 0
PB
DIS CHARG E
10 S
5 00
175 0
PB
CYC LE
CYC LE
10 S
10 0 0
5 00 240 0
A MV
BAC K
A MV
BAC K
A A MV
BAC K
10S MAN U CHG I 12 O 22
MAH1 958
28
00
10S
PB DIS CHARG E I 12 O 22
MAH158
28
00
PB
10S CYC LE I 12 O 22
MAH1 958
28
00
V6 0 V1 0
CHA RGING
A691
C
3812
V6 0 V1 0
DIS CHARG ING
A691
C
3812
V6 0 V1 0
CHA RGING
A691
C
3812
STO P
STO P
STO P
Select the max charge/discharge current. C-CUR: Charge current Range from 0.1-20.0, change unit: 0.1-20.0 D-CUR: Discharge current Range from 0.1-20.0, change unit: 0.1-20.0
Terminal Voltage Control. C-TVC: TVC of Charge Range from 2300-2450, change unit: 10, default: 2400 D-TVC: TVC of Discharge Range from 1550-1950, change unit: 10, default: 1750
SEQUENCE
Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge
PRE SENT SE TTING
D TVC
SEQ UENCE W TIM E TIM ES
SAV E
STA RT
175 0
C      D
MV
MIN
10
1
BAC K
PB: (Lead-acid battery)
CHARGE: Charge DISCHARGE: Discharge CYCLE: Charge and discharge
Select the cell count of the battery, range from 1-10 . Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation.
W-TIME
Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit 1 .
TIMES
Only in Cycle mode, set the times of charge/discharge cycle. Range from 1-9 times, change unit 1 .
SAVE
Save the current setting to 1st-9th memory.
Connect the battery, press start, charger will work under present setting.
Back to “STANDBY” menu.
27 28
NOTES OF WORK STATUS
Charge
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Out put(b atter y) Volta ge
Cha rge cur rent
Cha rged ca pacit y
Ext ernal t emper ature
Discharge
Out put(b atter y) Volta ge
Dis charg e/ curr ent
Dis charg ed capa city
Ext ernal t emper ature
Cycle
Out put(b atter y) Volta ge
Ext ernal t emper ature
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Tim er
Bat tery an d Cells
Wor king Mo de
Inp ut Volta ge
Cha rge cur rent
Cha rged ca pacit y
Tim er
Working stutus
PB
10S CHA RGE I 12 O 22
PB DIS CHARG E I 12 O 22
PB CYC LE I 12 O 22
V6 0 V1 0
CHA RGING
A691
MAH1 958
28
C
3812
00
10S
V6 0 V1 0
DIS CHARG ING
A691
MAH158
28
C
3812
00
10S
V6 0 V1 0
CHA RGING
A691
MAH1 958
28
C
3812
00
STO P
STO P
STO P
Work finshed
PB
10S
AUT O CHG
I 12
O 23
*Di splay s top alo ng with “ Bi... Bi... ” sound
PB
DIS CHARG E I 12
O 17
*Di splay s top alo ng with “ Bi... Bi... ” sound
PB
CYC LE I 12
O 17
*Di splay s top alo ng with “ Bi... Bi... ” sound
V6 0 V9 0
FIN ISHED
A690
MAH205 8
28
C
381 8
00
10S
MAH19 58
28
01
10S
MAH20 58
28
02
ENT ER
V6 0 V80
FIN ISHED
A690
C
382 0
ENT ER
V6 0 V80
FIN ISHED
A690
C
383 0
ENT ER
Note:
1, Press “START” or during working, if input voltage is higher than 30.0V, charger will display “HIGHER INPUT VOLTAGE” along with
.0V, charger will display “HIGHER INPUT VOLTAGE” along with
“Bi...Bi...Bi...” sound.
“Bi...Bi...Bi...” sound.
2, Press “START” or during working, if input voltage is lower than 11.0V, charger will display “LOWER INPUT VOLTAGE” along with “Bi...Bi...Bi...” sound.
3, If output connection reverse, charger will display “REVERSE OUTPUT” along with “Bi...Bi...Bi...” sound.
4, If battery’s total voltage is lower than the discharge cutoff level, charger will display “LOWER TOTAL VOLTAGE”
along with “Bi...Bi...Bi...” sound.
5, If battery’s cell voltage is lower than the discharge cutoff level, charger will display “LOWER CELL VOLTAGE” along with “Bi...Bi...Bi...” sound.
If battery detected by the charger is different from your setting, charger MAY display
6, “BATTERY ERROR” along with “Bi...Bi...Bi...” sound.
7,Disconnect the charge cable during working status, charger will display “CONNECTION ERROR” along with “Bi...Bi...Bi...” sound.
8, In “BALCHARGE” mode, disconnect the balance connector, charger will display “BALANCE ERROR”
9 plug in balance connector, charger will display
, In “DISCHARGE” and “STORAGE” mode,
along with “Bi...Bi...Bi...” sound.
cell voltage. Disconnect the balance connector, charger will display “BALANCE ERROR” along with “Bi...Bi...Bi...” sound.
Remark:
1, Once the charger report error, press “ENTER” to return “STANDBY” Menu.
2,Screen diagram shows in this manual only for reference, and will be different in each use.
29 30
MONITOR
BATTERY IN SERIES/PARALLEL CHARGE
Choose and enter “Monitor”, the charger will monitoring the status of the voltage of the power supply, total/cell voltage of the battery.
Volt age of po wer sup ply
Total v oltag e of batt ery
Ext ernal t emper ature
VPO WER
VBA TT
TEM P
12
28
MON ITOR C6 403 8 20 C5 403 5 17
V6 0
C4 403 0 12 C3 402 5 7
A1024
C2 402 0 2
C
C1 401 8 0
AGA IN
Bat tery ce lls
Cel l volta ge
Cel l volta ge diff erenc e
BAC K
Note: press “AGAIN” charger will monitor the status again, press “BACK”, back to “STANDBY” menu.
You can charge and balance several Lithium batteries at the same time, by using optional Series Adaptor or Parallel Adapter. Please note that the battery packs being charged should have the close voltage, the same capacity and cell-count.
31 32
WARRANTY
Application Test Standa rd
CONFORMITY DECLARATION
CASALRC provide a period of one year product warranty from the date
C8G of purchase. The warranty only applies to material or operational defects, which are present at the time of purchase.
During that period, we will repair or replace free of service charge for products deemed defective due to those causes. This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of failure to observe the use guideline in this manual.
LIABILITY EXCLUSION
CASALRC is designed and approved exclusively for charge the types of battery stated in this manual. CASALRC do not accept any liability if the charger is used for any purpose other than that stated. We are unable to ensure you follow the instructions come with the charger, and we have no control over the methods you employ for using, operating and maintaining this device. For this reason we are obliged to deny the liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of this product, or which are connected with such operation in any way. Unless otherwise prescribed by law, our obligation to pay compensation, regardless of the legal argument employed, is limited to the invoice value of those CASALRC products which were immediately and directly involved in the event in which the damage occurred.
C8G
AM8G satisfies all relevant and mandatory EC directives and FCC Part 15 Subpart B: 2008. The product has been tested to meet the following technical standards:
Title Result
CE-LVD EN60335
EN55014-1:2006
EN55014-2:1997 +A1:2001
CE-EMC
EN61000-6-1(2007)
EN61000-6-3(2007)
FCC-VOC FCC Part 15B
This symbol means that you mu st d is pose o f el ec trical devices from the general househo ld was te whe n it reaches the end of its u seful life. Take yo ur ch arger to your local waste collec ti on po int or r ecycling centre. This a pplies to al l count ries of the Europea n Union , and to o ther Eu ropean countries with a se parate waste collection s ystem.
For safety of household and similar electrical appliances.
Electromagnetic compatibilit y-Requirements for household appliances,electric tools and Similar apparaturs - Part 1: Emission
Electromagnetic compatibilit y-Requirements for household appliances,electric tools and Similar apparaturs - Part 2: Immunity-Product family standard
Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments.
Electromagnetic compatibilit y (EMC) -- Part 6-3: Genericstandards - Emission standard for residential, commercial andlight-industrial environments.
Electromagnetic compatibility (EMC), Conduction Emission & Radiation Emission
Conform
Conform
Conform
Conform
Conform
Conform
33 34
Loading...