AmeriHome BS2356SET User Manual

Bar Stool & Table Assembly Instructions 201107

Max Weight Capacity 330 Lb

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem, have questions or need parts for this product, visit our website
http://www.buffalotools.com
8 AM - 4 PM Central Time. A copy of the sales receipt is required.

or call Customer Service at 1-888-287-6981, Monday-Friday,

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

Foot Cap

Support Cylinder

Foot
Rest

ASSEMBLY INSTRUCTION
For proper assembly, follow the instructions below.

Use an allen wrench to attach the Seat Plate to the underside of the Seat with the
provided Screws. Insert the Support Cylinder into the center of the Seat Plate

Place the Foot Cap over the Footrest.
Insert the Support Cylinder into the center hole of the Footrest,

and press down FIRMLY.

To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the
Seat. To lower, raise the Handle upward by sitting on the Seat.

To disassemble, turn the stool upside down, and hit
the clip on the center of the bottom of the Footrest
with a hammer or mallet to disengage the locking
mechanism. Then, turn the stool right side up, and lift
the Seat upward, pulling the Seat Assembly off of the
Footrest.

To separate the Support Cylinder from the Seat,
gently strike the Seat Plate with a rubber mallet until

the Seat and Support Cylinder have separated.