AmeriHome BS2205SET User Manual

Bar Stool Assembly Instructions 201107

Max Weight Capacity 330 Lb

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem, have questions or need parts for this product, visit our website
http://www.buffalotools.com
8 AM - 4 PM Central Time. A copy of the sales receipt is required.

or call Customer Service at 1-888-287-6981, Monday-Friday,

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

Support Cylinder

Base

ASSEMBLY INSTRUCTION
For proper assembly, follow the instructions below.

Insert the thinner end of the Support Cylinder into the center
hole of the Base, and press down FIRMLY.

Screw the Foot Rest onto the bottom of the Seat
Guide the assembled Support Cylinder and Base into the

hole on the bottom of the Seat and firmly press down on
the Support Column.

To raise and lower the seat, grasp the Handle and pull upward without applying any weight on the
seat. To lower, raise the handle upward by sitting on the seat.

To disassemble, turn the stool upside down and hit the clip in the center of the
bottom of the Base with a hammer to disengage the locking mechanism. Then,
turn the stool right side up, and lift the Seat upward, pulling the Seat assembly
off of the Base.

To remove the Seat from the Support Cylinder, turn the stool upside down,
and gently strike the edge of the Seat where it meets the Support Cylinder.