AmeriHome BS2091 User Manual

BS2091

Foot
Foot Cap

Support Cylinder

Remove Black Cap

Discard Before Assembly

ATTENTION!

Bar Stool Assembly Instructions

Max Weight Capacity 330 Lb 201302

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE .

If you experience a problem, have questions or need parts for this product, visit our website

http://www.amerihomebrand.com

8 AM - 4 PM Central Time. A copy of the sales receipt is required.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE
WARRANTY FOR FUTURE REFERENCE.

or call Customer Service at 1-888-287-6981, Monday-Friday,

Rest

A Black Cap protects the
the Support Cylinder.

Place the Foot Cap

Remove the Black Cap and
Insert the Support Cylinder

Insert the Support
hole of the Footrest

Press down firmly
into base.

ASSEMBLY INSTRUCTION

Use an allen wrench to attach the

Metal Clip

hydraulic mechanism on

into the center of the Seat
Plate

To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the
Seat. To lower, raise the Handle upward by sitting on the Seat.

To separate the Support Cylinder from the Seat, gently strike the Seat Plate with a
rubber mallet until the Seat and Support Cylinder have separated.

discard it before assembly.
The Orange hydraulic
button will become visible.

over the Footrest.

To disassemble, turn the stool upside down,
and hit the metal clip on the center of the
bottom of the Footrest w i th a rubber mallet
to disengage the locking mechanism. Then,
turn the stool right side up, and lift the Seat
upward, pulling the Seat Assembly off of the
Footrest.

Seat Plate to the underside of the
Seat with the provided Screws.

Cylinder into the center

on seat to secure