American Weigh Scales (AWS) AMW-440T User Manual

Page 1
American Weigh Scales, Inc.
AMW-440T Talking Bathroom Scale
440lb x 0.2lb
lb
USER’S MANUAL
Page 2
American Weigh
AMW-440T User’s Manual
440lb x 0.2lb
Avoid any exposure to extreme heat or cold. Your scale will work
better when operating in normal room temperature. Allways allow the scale to acclimate to normal room temperature for at least an hour before use.
Give the scale sufcient warm up time before use. Usually 30 to 60
seconds to give the internal components time to stablize.
Keep your scale in a clean environment. Dust, dirt, moisture, vibra-
tion, air currents, or a close proximity to other electronic equipment can cause an adverse effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed onto the
weighing surface. Although this scale is designed to be quite durable, avoid rough treatment as this may permanently damage the internal sensor.
Do not shake, drop, or otherwise shock the scale. This is a precision
instrument and must be handled with extreme care.
Only operate the scale on a stable, vibration free surface.
Always store in a dry place to avoid moisture accumulation on
internal components.
Page 3
lb
Parts Description
1. LCD Display
1
2. Tempered Glass
3. Scale Feet
4. AA Battery Compartments
2
5. Kg / Lb Selector
Top
6. Lock / Unlock Mode Selector
3
6
4
7. Speaker
5
Kg
Lb
On Off
Side
7
Kg
Lb
On Off
Bottom
I. Setup
Remove the main unit from the package. Insert two AA batter­ies (4 included) into each AA battery compartment (see above).
Lay the scale down onto a at and stable surface. Scale is now
ready for use. See next page for Operating Instructions.
Page 4
I. Mode Selection (See prev. page for switch locations)
1. Turn scale over to set desired modes.
2. Select between kilograms (kg) / or pounds (lb) using the switch
3. Select Talk Off (Off) or Talk On (On)
- Talk On (On): Turns talking function ON and keeps the weight value locked on the LCD for a few seconds.
- Talk Off (Off): Turns talking function OFF and
displays the weight in real-time on the LCD
II. Weighing
1. Tap on the scale once with your foot to turn on.
2. Wait until [0.0] is displayed, (If talking function is enabled the scale will say “OK, please step on the scale”).
3. Step onto the scale and wait for readout to stabilize.
4. The weight will be displayed on LCD (If talking function is enabled the scale will speak the wait)
Note:
The primary reason for innaccuracy or malfunction are low batteries, overload or operating on an unstable surface. Please keep this in mind and maintain and operate your scale prop­erly. This scale is a precision instrument and must be handled with care.
V. Specications
Capacity: 440lb ; 200kg Graduation: 0.2lb; 0.1kg Units: pounds (lb) ; kilograms (kg) Display: 4 digits 1/2” in height
Loading...