American Weigh Scales AMWSHIP-330 User Manual

V. Proper Care Instructions

Don’t expose scale to moisture

Don’t drop or mistreat the scale.

American Weigh Scales, Inc.

>150lb

Don’t overload the scale. This will
permanently damage it!

Don’t leave weight on the scale
when not in use.

Replace battery when the scale
displays “ “ or shows “LO”
on the display when powered up

TA

O

R

N

E

/O

F

F

M

O

D

E

AMWSHIP-

330 x 0.1lb / 150 x 0.05kg

User Manual

I. Operation

III. Backlight.

For the best results, only operate your scale on a at

and stable surface.

1. Insert the 4 AA batteries into the battery

compartment, or plug the AC-Adapter into an available

wall outlet and plug the opposite end into the indicator.

2. Press the “ON/OFF” key to turn the scale on.

3. Wait until the display shows “0.0” (zero) before plac-

ing any weight on the scale.

4. Carefully place the item(s) to be weighed onto the

weighing platform.

5. After a few seconds, the weight should stabilize and

you can now get your weight reading from the LCD

display.

6. Using the “MODE” key you can switch between

weighing units (lb, oz, kg)

II. Tare Weighing

The Tare button resets the display to zero when weight

is on the scale, allowing you to subtract the weight of

a container.

1. Place the container you wish to use on the

platform.

2. When the readout stabilizes press the TARE key

This scale has a backlit display with backlight on/off

button.

1. The backlight automatically turns on when the scale

turns on.

2. To turn it off, press the LIGHT button on the scales

indicator.

IV. Troubleshooting

H - Overload

-E or no display - Readjust or replace the batter­ies.

Model

Capacity

Resolution

Weighing Units

Display

Platform Dimensions (inches)

Power

Weight

pounds (lb), kilograms (kg), ounce (oz)

Blue Backlit LCD (with LIGHT button)

4 x AA Batteries or AC-Adapter (both included)

AMWSHIP-330

330lb / 150kg / 5280oz

0.1lb / 0.05kg / 1oz

11.25 x 11.75 x 1.37

once.

3. The display will reset to zero allowing you to now

add items to the container and obtain the weight of just

the contents (net weight).