P200U Series SPEC SHEET
True Union Ball Valve
Pressure Rating: 150 PSI @ 73° F
Max. Temperature: 140° F (PVC)
Max. Temperature: 180° F (CPVC)
Seals in both directions.
Double Union/double blocking design permits in-line maintenance
without disconnecting the pipe.
External adjustment allows compensation for seat wear.
Quick and easy disassembly without the use of special tools. The handle
doubles as a spanner wrench.
Built-in actuator mounting pad.
Manufactured in compliance with ASTM F1970.
Female solvent-weld socket dimensions: ASTM D2467
Female pipe thread dimensions: ASTM F1498 and ANSI/ASME B1.20.1
Not recommended for service or test with compressed air or gasses.
True Union
Ball Valve
P200U Sch 80 PVC * PTFE EPDM 1/2" - 4"
P200U-40 Sch 40 PVC Socket PTFE EPDM 1/2" - 4"
P200UV Sch 80 PVC Socket PTFE FPM 1/2" - 4"
P200UC CPVC * PTFE EPDM 1/2" - 4"
P200UP PVDF Socket PTFE FPM 1/2" - 2"
*1/2" - 2" supplied with both NPT and Socket unions in the box.
*2 1/2" - 4" supplied with Socket Ends as standard. NPT unions available upon request.
Body Ends Seats Seals Sizes
P200U Series
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
Ød1 0.85 1.06 1.32 1.67 1.91 2.39 2.89 3.52 4.52
Ød2 0.84 1.05 1.31 1.66 1.89 2.37 2.87 3.49 4.49
ØD 1.83 2.17 2.60 3.23 3.86 4.72 5.51 6.42 8.86
ØD1 1.22 1.46 1.77 2.13 2.56 3.11 3.62 4.25 5.75
Ød 0.51 0.71 0.91 1.18 1.50 1.89 2.40 2.72 3.90
H1 1.85 2.24 2.60 2.91 3.43 4.17 4.57 5.12 7.01
H2 0.83 1.02 1.30 1.50 1.61 2.09 - - -
I 0.87 1.00 1.13 1.25 1.38 1.50 1.75 1.88 2.25
L 4.49 5.31 5.87 6.61 6.89 8.19 10.83 11.97 13.07
L1 2.36 2.87 3.11 3.46 3.74 4.49 5.43 6.22 6.93
L2 3.07 3.62 3.94 4.33 4.76 5.79 7.09 8.82 10.94
Thd./in. NPT 14 14 11.5 11.5 11.5 11.5 8* 8* 8*
S 0.31 0.31 0.43 0.43 0.43 0.59 - - -
F 1.18 1.30 1.57 1.85 2.05 2.76 - - -
M M5 M6 M6 M8 M8 M8 - - -
Cv 8 15 29 75 90 140 330 480 600
*Flanged True Union Ball Valve.
American Valve, Inc. PO Box 35229, Greensboro, NC 27425 Tel: 1.800.645.0101 Fax: 1.800.876.0109 www.americanvalve.com
DATE:
P200U Series SPEC SHEET
True Union Ball Valve
MATERIALS
NO. PAR T MATERIALS QTY
1 Body PVC, CPVC, PVDF 1
2 Stem O-Ring EPDM, FPM 2
3 Stem PVC, CPVC, PVDF 1
4 Ball PVC, CPVC, PVDF 1
5 Seat PTFE 1
6 Carrier O-Ring EPDM, FPM 1
7 Seal Carrier PVC, CPVC, PVDF 1
8 Union O-Ring EPDM, FPM 2
9 Union Ends PVC, CPVC, PVDF 2
10 Union Nut PVC, CPVC, PVDF 2
11 Handle ABS 1
12 Insert Nut C3604 2,4
15 Seat O-Ring EPDM, FPM 2
DATE:
American Valve, Inc. PO Box 35229, Greensboro, NC 27425 Tel: 1.800.645.0101 Fax: 1.800.876.0109 www.americanvalve.com
Loading...